diff --git a/.DS_Store b/.DS_Store
index bded62e..a29a367 100644
Binary files a/.DS_Store and b/.DS_Store differ
diff --git a/.gitignore b/.gitignore
index f2d8f15..983fda2 100644
--- a/.gitignore
+++ b/.gitignore
@@ -16,3 +16,8 @@
 
 # 忽略构建副产物
 sdkconfig.old
+
+# 忽略日志文件和参考项目
+05-最新日志.txt
+07-uniapp最新日志.txt
+/Dzbj_ESP32_S3
diff --git a/main/protocols/volc_rtc_protocol.cc b/main/protocols/volc_rtc_protocol.cc
index 0219619..e7b1097 100644
--- a/main/protocols/volc_rtc_protocol.cc
+++ b/main/protocols/volc_rtc_protocol.cc
@@ -600,6 +600,10 @@ void VolcRtcProtocol::DataCallback(void* context, const void* data, size_t len,
                     uint32_t json_len = (uint32_t)((buf[4] << 24) | (buf[5] << 16) | (buf[6] << 8) | (buf[7]));
                     if (json_len > 0 && (size_t)(8 + json_len) <= len) {
                         json_text.assign(reinterpret_cast<const char*>(buf + 8), json_len);
+                        // 显示字幕接收详细JSON数据的日志
+                        // if (!protocol->suppress_incoming_message_log_) {
+                        //     const char* prefix = is_ctrl ? "ctrl" : (is_conv ? "conv" : (is_tool ? "tool" : (is_subv ? "subv" : "info")));
+                        // 不显示字幕接收详细JSON数据的日志-以下两行代码
                         if (!is_subv && !protocol->suppress_incoming_message_log_) {
                             const char* prefix = is_ctrl ? "ctrl" : (is_conv ? "conv" : (is_tool ? "tool" : "info"));
                             ESP_LOGI(TAG, "接收下行消息(%s): %.*s", prefix, (int)json_text.size(), json_text.c_str());
diff --git a/sdkconfig b/sdkconfig
index f575e23..1986993 100644
--- a/sdkconfig
+++ b/sdkconfig
@@ -14,7 +14,6 @@ CONFIG_SOC_GDMA_SUPPORTED=y
 CONFIG_SOC_AHB_GDMA_SUPPORTED=y
 CONFIG_SOC_GPTIMER_SUPPORTED=y
 CONFIG_SOC_LCDCAM_SUPPORTED=y
-CONFIG_SOC_LCDCAM_CAM_SUPPORTED=y
 CONFIG_SOC_LCDCAM_I80_LCD_SUPPORTED=y
 CONFIG_SOC_LCDCAM_RGB_LCD_SUPPORTED=y
 CONFIG_SOC_MCPWM_SUPPORTED=y
@@ -102,7 +101,7 @@ CONFIG_SOC_CPU_HAS_FPU=y
 CONFIG_SOC_HP_CPU_HAS_MULTIPLE_CORES=y
 CONFIG_SOC_CPU_BREAKPOINTS_NUM=2
 CONFIG_SOC_CPU_WATCHPOINTS_NUM=2
-CONFIG_SOC_CPU_WATCHPOINT_MAX_REGION_SIZE=0x40
+CONFIG_SOC_CPU_WATCHPOINT_MAX_REGION_SIZE=64
 CONFIG_SOC_SIMD_PREFERRED_DATA_ALIGNMENT=16
 CONFIG_SOC_DS_SIGNATURE_MAX_BIT_LEN=4096
 CONFIG_SOC_DS_KEY_PARAM_MD_IV_LENGTH=16
@@ -209,7 +208,7 @@ CONFIG_SOC_RTCIO_INPUT_OUTPUT_SUPPORTED=y
 CONFIG_SOC_RTCIO_HOLD_SUPPORTED=y
 CONFIG_SOC_RTCIO_WAKE_SUPPORTED=y
 CONFIG_SOC_LP_IO_CLOCK_IS_INDEPENDENT=y
-CONFIG_SOC_SDM_GROUPS=1
+CONFIG_SOC_SDM_GROUPS=y
 CONFIG_SOC_SDM_CHANNELS_PER_GROUP=8
 CONFIG_SOC_SDM_CLK_SUPPORT_APB=y
 CONFIG_SOC_SPI_PERIPH_NUM=3
@@ -370,9 +369,6 @@ CONFIG_SOC_BLE_DEVICE_PRIVACY_SUPPORTED=y
 CONFIG_SOC_BLUFI_SUPPORTED=y
 CONFIG_SOC_ULP_HAS_ADC=y
 CONFIG_SOC_PHY_COMBO_MODULE=y
-CONFIG_SOC_LCDCAM_CAM_SUPPORT_RGB_YUV_CONV=y
-CONFIG_SOC_LCDCAM_CAM_PERIPH_NUM=1
-CONFIG_SOC_LCDCAM_CAM_DATA_WIDTH_MAX=16
 CONFIG_IDF_CMAKE=y
 CONFIG_IDF_TOOLCHAIN="gcc"
 CONFIG_IDF_TOOLCHAIN_GCC=y
@@ -1037,7 +1033,6 @@ CONFIG_BT_BLE_42_FEATURES_SUPPORTED=y
 CONFIG_BT_BLE_42_DTM_TEST_EN=y
 CONFIG_BT_BLE_42_ADV_EN=y
 CONFIG_BT_BLE_42_SCAN_EN=y
-CONFIG_BT_BLE_VENDOR_HCI_EN=y
 # CONFIG_BT_BLE_HIGH_DUTY_ADV_INTERVAL is not set
 # CONFIG_BT_ABORT_WHEN_ALLOCATION_FAILS is not set
 # end of Bluedroid Options
@@ -1259,7 +1254,6 @@ CONFIG_ESP_TLS_USE_DS_PERIPHERAL=y
 # CONFIG_ESP_TLS_SERVER_MIN_AUTH_MODE_OPTIONAL is not set
 # CONFIG_ESP_TLS_PSK_VERIFICATION is not set
 # CONFIG_ESP_TLS_INSECURE is not set
-CONFIG_ESP_TLS_DYN_BUF_STRATEGY_SUPPORTED=y
 # end of ESP-TLS
 
 #
@@ -1287,12 +1281,6 @@ CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
 CONFIG_ESP_ALLOW_BSS_SEG_EXTERNAL_MEMORY=y
 # end of Common ESP-related
 
-#
-# ESP-Driver:Camera Controller Configurations
-#
-# CONFIG_CAM_CTLR_DVP_CAM_ISR_CACHE_SAFE is not set
-# end of ESP-Driver:Camera Controller Configurations
-
 #
 # ESP-Driver:GPIO Configurations
 #
@@ -1610,11 +1598,8 @@ CONFIG_ESP_PHY_RF_CAL_PARTIAL=y
 # CONFIG_ESP_PHY_RF_CAL_NONE is not set
 # CONFIG_ESP_PHY_RF_CAL_FULL is not set
 CONFIG_ESP_PHY_CALIBRATION_MODE=0
-CONFIG_ESP_PHY_PLL_TRACK_PERIOD_MS=1000
 # CONFIG_ESP_PHY_PLL_TRACK_DEBUG is not set
 # CONFIG_ESP_PHY_RECORD_USED_TIME is not set
-CONFIG_ESP_PHY_IRAM_OPT=y
-# CONFIG_ESP_PHY_DEBUG is not set
 # end of PHY
 
 #
@@ -2285,7 +2270,6 @@ CONFIG_MBEDTLS_DYNAMIC_BUFFER=y
 # CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK is not set
 # CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION is not set
 # CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE is not set
-# CONFIG_MBEDTLS_SSL_KEYING_MATERIAL_EXPORT is not set
 CONFIG_MBEDTLS_PKCS7_C=y
 # end of mbedTLS v3.x related
 
@@ -3314,7 +3298,6 @@ CONFIG_BT_NIMBLE_COEX_PHY_CODED_TX_RX_TLIM_DIS=y
 CONFIG_SW_COEXIST_ENABLE=y
 CONFIG_ESP32_WIFI_SW_COEXIST_ENABLE=y
 CONFIG_ESP_WIFI_SW_COEXIST_ENABLE=y
-# CONFIG_CAM_CTLR_DVP_CAM_ISR_IRAM_SAFE is not set
 # CONFIG_MCPWM_ISR_IN_IRAM is not set
 # CONFIG_EVENT_LOOP_PROFILING is not set
 CONFIG_POST_EVENTS_FROM_ISR=y