I (47) WeatherApi: 初始化天气API配置 - 默认城市: 北京 I (48) WeatherApi: WiFi位置缓存限制已设置为: 5 条 I (48) coexist: coex firmware version: 7b9a184 I (49) coexist: coexist rom version e7ae62f I (49) main_task: Started on CPU0 I (59) main_task: Calling app_main() I (79) BackgroundTask: background_task started I (79) BluetoothProvisioning: 蓝牙配网对象创建完成 I (79) WifiBoard: force_ap is set to 1, will clear in StartNetwork() I (79) button: IoT Button Version: 3.5.0 I (79) gpio: GPIO[0]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 I (79) button: IoT Button Version: 3.5.0 I (79) gpio: GPIO[4]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 I (79) Airhub1: Initializing I2C master bus for audio codec... I (79) Airhub1: Scanning I2C bus for devices... I (79) Airhub1: I2C设备在线: 0x18 E (79) i2c.master: I2C transaction unexpected nack detected E (79) i2c.master: s_i2c_synchronous_transaction(945): I2C transaction failed E (79) i2c.master: i2c_master_receive(1261): I2C transaction failed E (79) i2c.master: I2C transaction unexpected nack detected E (79) i2c.master: s_i2c_synchronous_transaction(945): I2C transaction failed E (79) i2c.master: i2c_master_receive(1261): I2C transaction failed I (79) Airhub1: I2C设备在线: 0x40 I (79) Airhub1: I2C scan completed. Found 2 devices I (79) DZBJ: 开始初始化显示硬件... I (79) gpio: GPIO[7]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 I (79) st77916: LCD panel create success, version: 1.0.1 W (219) st77916: The 3Ah command has been used and will be overwritten by external initialization sequence I (339) LCD: LCD GRAM cleared (black filled) I (339) DZBJ: LCD 硬件初始化完成 I (339) gpio: GPIO[5]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:2 I (339) gpio: GPIO[6]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 I (739) CST816S: IC id: 182 I (739) LCD: Touch controller initialized successfully I (739) LVGL: Starting LVGL task I (739) LCD: LVGL buffer: 14400 bytes (W:360, Lines:20, DMA, single) I (739) LCD: Touch controller added to LVGL I (739) DZBJ: LVGL 初始化完成 I (849) Airhub1: 🤖 AI对话模式启动 I (849) Airhub1: 初始化按钮... I (849) Airhub1: Boot button initialized on GPIO0 I (849) Airhub1: Volume up button initialized on GPIO-1 I (849) Airhub1: Volume down button initialized on GPIO-1 I (849) Airhub1: 故事按键已初始化，GPIO引脚 =4 I (849) Airhub1: 所有按键已成功初始化！ I (849) Airhub1: IMU传感器未初始化，跳过IoT注册 I (849) Airhub1: 配网模式：跳过电池检测、IMU传感器、低功耗管理 I (849) Airhub1: 电容触摸板按钮已禁用 (ENABLE_TOUCH_PAD_BUTTONS=0) I (849) Application: 打印设置设备状态日志: starting I (849) Application: 正常启动流程，将执行开机播报和网络连接播报 I (849) Airhub1: Initializing audio codec (output only)... I (849) Airhub1: Creating BoxAudioCodec (ES8311, without reference) ... I (849) BoxAudioCodec: TX-only channel created (provisioning mode) I (849) ES8311: Work in Slave mode I (859) gpio: GPIO[48]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 I (859) BoxAudioCodec: BoxAudioDevice initialized (output only) I (859) Airhub1: Audio codec initialized successfully I (859) Application: 配网模式：跳过 Opus 编码器、输入重采样器、麦克风输入 I (859) I2S_IF: channel mode 0 bits:16/16 channel:2 mask:1 I (859) I2S_IF: STD Mode 1 bits:16/16 channel:2 sample_rate:16000 mask:1 I (869) Adev_Codec: Open codec device OK I (879) AudioCodec: Set output enable to true I (879) AudioCodec: Audio codec started (output only, provisioning mode) I (879) AudioCodec: 将运行时输出音量设置为：75 I (879) Application: 设备启动完成，播放开机播报语音 I (889) WifiBoard: force_ap cleared to 0 I (889) WifiBoard: 🔵 进入配网模式 - BLE蓝牙配网 I (889) WifiBoard: 🔵 进入配网模式 - 使用BLE蓝牙配网 I (889) WifiBoard: 🔵 正在启动BLE蓝牙配网服务... I (889) Application: 🎵 测试模式：音频开始播放，等待播放完成 I (889) Application: ✅ 测试模式：音频播放完成 I (889) BluetoothProvisioning: 🔄 配网状态变化: IDLE -> INITIALIZING I (889) BluetoothProvisioning: 初始化WiFi... I (889) pp: pp rom version: e7ae62f I (889) net80211: net80211 rom version: e7ae62f I (899) wifi:wifi driver task: 3fcd91c4, prio:23, stack:6656, core=0 I (899) wifi:wifi firmware version: bea31f3 I (899) wifi:wifi certification version: v7.0 I (899) wifi:config NVS flash: enabled I (899) wifi:config nano formatting: disabled I (899) wifi:Init data frame dynamic rx buffer num: 32 I (899) wifi:Init dynamic rx mgmt buffer num: 5 I (899) wifi:Init management short buffer num: 32 I (899) wifi:Init static tx buffer num: 8 I (899) wifi:Init tx cache buffer num: 32 I (899) wifi:Init static tx FG buffer num: 2 I (899) wifi:Init static rx buffer size: 1600 I (899) wifi:Init static rx buffer num: 10 I (899) wifi:Init dynamic rx buffer num: 32 I (909) wifi_init: rx ba win: 16 I (909) wifi_init: accept mbox: 6 I (909) wifi_init: tcpip mbox: 32 I (909) wifi_init: udp mbox: 6 I (909) wifi_init: tcp mbox: 6 I (909) wifi_init: tcp tx win: 5760 I (909) wifi_init: tcp rx win: 5760 I (909) wifi_init: tcp mss: 1440 I (909) wifi_init: WiFi/LWIP prefer SPIRAM I (909) phy_init: phy_version 701,f4f1da3a,Mar 3 2025,15:50:10 I (949) wifi:mode : sta (d0:cf:13:03:bb:f0) I (949) wifi:enable tsf I (949) BluetoothProvisioning: WiFi初始化完成 I (949) BluetoothProvisioning: 初始化蓝牙控制器... I (949) BLE_INIT: BT controller compile version [6cfabcd] I (949) BLE_INIT: Feature Config, ADV:1, BLE_50:1, DTM:1, SCAN:1, CCA:0, SMP:1, CONNECT:1 I (949) BLE_INIT: Bluetooth MAC: d0:cf:13:03:bb:f2 I (949) BluetoothProvisioning: 初始化Bluedroid协议栈... I (969) BluetoothProvisioning: 注册 BLE GAP/GATTS 回调... I (969) BluetoothProvisioning: ✅ GATTS App 注册成功, gatts_if=3 I (969) BluetoothProvisioning: Service 创建成功, handle=40 I (969) BluetoothProvisioning: WRITE 特征添加成功, handle=42 I (969) BluetoothProvisioning: NOTIFY 特征添加成功, handle=44 I (969) BluetoothProvisioning: CCCD 添加成功, handle=45 I (969) BluetoothProvisioning: ✅ GATT Service 启动成功 I (969) BluetoothProvisioning: 注册WiFi事件处理器... I (969) BluetoothProvisioning: 🔄 配网状态变化: INITIALIZING -> IDLE I (969) BluetoothProvisioning: 蓝牙配网初始化完成 (GATT Server 模式) I (969) BluetoothProvisioning: 蓝牙MAC地址: d0:cf:13:03:bb:f2 I (969) WifiBoard: 🔍 BLE Initialize返回结果: true I (969) BluetoothProvisioning: 🔵 开始启动蓝牙配网服务 (GATT Server)... I (969) BluetoothProvisioning: 🔍 检查初始化状态: initialized_ = true I (969) BluetoothProvisioning: MAC地址发送状态已重置 I (969) BluetoothProvisioning: 🔄 MAC地址发送状态已重置 I (969) BluetoothProvisioning: 🧹 清除之前的WiFi凭据... I (969) BluetoothProvisioning: ✅ WiFi凭据清除完成，准备接收新的配网信息 I (969) BluetoothProvisioning: 📡 蓝牙设备名称: Airhub_d0:cf:13:03:bb:f2 I (969) BluetoothProvisioning: 📡 广播数据构建完成，长度: 29 字节 I (969) BluetoothProvisioning: 📡 扫描响应数据构建完成，长度: 7 字节 I (969) BluetoothProvisioning: 📡 广播数据设置完成，配置扫描响应数据 I (969) BluetoothProvisioning: 📡 扫描响应数据设置完成，启动广播 I (969) BluetoothProvisioning: ✅ 广播启动成功 I (969) BluetoothProvisioning: 🔄 配网状态变化: IDLE -> ADVERTISING I (969) BluetoothProvisioning: 蓝牙配网广播已启动，等待客户端连接... I (969) WifiBoard: ✅ BLE蓝牙配网启动成功 I (979) WifiBoard: 📱 请使用支持BLE的手机APP连接设备进行配网 W (979) Application: Alert BLE配网模式: 请使用手机APP搜索Airhub_开头的蓝牙设备 [happy] I (989) AI_CHAT_UI: GIF表情切换: happy I (989) WifiBoard: Starting BLE provisioning monitor... I (989) WifiBoard: 🔍 BLE配网启动结果: 成功 I (989) WifiBoard: ✅ BLE配网启动成功，等待手机连接 I (989) Application: 配网模式：跳过协议初始化、位置检测等网络业务 I (989) Application: 打印设置设备状态日志: idle I (999) Application: 开始播放下行音频: 样本=960 采样率=16000 I (1009) AI_CHAT_UI: GIF表情切换: neutral I (1009) main_task: Returned from app_main() I (5339) BluetoothProvisioning: 📱 客户端已连接, conn_id=0, addr=73:8f:af:0d:36:7a I (5339) BluetoothProvisioning: 🔍 [DEBUG] 设置client_connected_为true I (5339) BluetoothProvisioning: MAC地址发送状态已重置 I (5339) BluetoothProvisioning: 🔄 MAC地址发送状态已重置 I (5339) BluetoothProvisioning: 🔄 配网状态变化: ADVERTISING -> CONNECTED I (5339) WifiBoard: BLE client connected I (5339) BluetoothProvisioning: 🔍 [DEBUG] BLE连接处理完成，client_connected_=true I (5339) BluetoothProvisioning: 广播已停止 I (5749) BluetoothProvisioning: 连接参数更新: status=0, conn_int=24, latency=0, timeout=400 I (6079) BluetoothProvisioning: 连接参数更新: status=0, conn_int=6, latency=0, timeout=500 I (6149) BluetoothProvisioning: MTU 更新: 512 I (6229) BluetoothProvisioning: 连接参数更新: status=0, conn_int=24, latency=0, timeout=400 I (6649) BluetoothProvisioning: NOTIFY 已启用 I (6829) BluetoothProvisioning: 📱 手机请求获取WiFi列表，开始扫描 W (6829) wifi:Error! Should use default active scan time parameter for WiFi scan when Bluetooth is enabled!!!!!! I (6829) BluetoothProvisioning: 🔍 WiFi扫描已启动 I (13489) AudioCodec: Set output enable to false I (15599) BluetoothProvisioning: 📡 WiFi扫描完成，准备发送WiFi列表 I (15599) BluetoothProvisioning: 📊 扫描到 41 个WiFi热点 I (15599) BluetoothProvisioning: ✅ 成功获取WiFi扫描结果 I (15609) BluetoothProvisioning: 📊 过滤后剩余 26 个2.4GHz热点 (原始: 41) I (15609) BluetoothProvisioning: 向客户端发送WiFi列表，共26个AP I (16129) BluetoothProvisioning: 📤 WiFi列表已发送给客户端，包含 26 个热点 I (16129) BluetoothProvisioning: 📤 WiFi列表已发送，包含 26 个热点 I (25099) BluetoothProvisioning: 📶 收到WiFi SSID: airhub I (25249) BluetoothProvisioning: 🔐 收到WiFi密码 (长度: 9) W (25249) wifi:Password length matches WPA2 standards, authmode threshold changes from OPEN to WPA2 I (25299) BluetoothProvisioning: 📡 已发起WiFi连接请求，启动超时监控 I (25299) WifiBoard: WiFi credentials received via BLE I (25399) wifi:new:<1,0>, old:<1,0>, ap:<255,255>, sta:<1,0>, prof:1, snd_ch_cfg:0x0 I (25399) wifi:state: init -> auth (0xb0) I (25429) wifi:state: auth -> assoc (0x0) I (25439) wifi:state: assoc -> run (0x10) I (25499) wifi:connected with airhub, aid = 4, channel 1, BW20, bssid = 70:2a:d7:85:bc:eb I (25499) wifi:security: WPA2-PSK, phy: bgn, rssi: -32 I (25509) wifi:pm start, type: 1 I (25509) wifi:dp: 1, bi: 102400, li: 3, scale listen interval from 307200 us to 307200 us I (25509) wifi:set rx beacon pti, rx_bcn_pti: 14, bcn_timeout: 25000, mt_pti: 14, mt_time: 10000 I (25509) BluetoothProvisioning: ✅ WiFi连接成功，SSID: airhub，等待获取IP地址 I (25529) wifi:AP's beacon interval = 102400 us, DTIM period = 1 I (25529) wifi:idx:0 (ifx:0, 70:2a:d7:85:bc:eb), tid:0, ssn:0, winSize:64 I (27229) esp_netif_handlers: sta ip: 192.168.124.22, mask: 255.255.255.0, gw: 192.168.124.1 I (27229) BluetoothProvisioning: ✅ WiFi获取IP地址成功: 192.168.124.22 I (27229) BluetoothProvisioning: 💾 启用WiFi配置自动保存到NVS存储... I (27229) BluetoothProvisioning: ✅ WiFi配置将自动保存到NVS存储 I (27229) BluetoothProvisioning: 📋 获取当前WiFi配置成功，SSID: airhub I (27229) SsidManager: compare [airhub:6] [airhub:6] W (27229) SsidManager: SSID airhub already exists, overwrite it I (27229) BluetoothProvisioning: ✅ WiFi凭据已保存到NVS列表 I (27229) BluetoothProvisioning: BluetoothProvisioning WIFI_CONNECTED skip_session=0 I (27229) BluetoothProvisioning: 🔍 准备设置状态为SUCCESS并触发回调 I (27229) BluetoothProvisioning: 🔄 配网状态变化: CONNECTED -> SUCCESS I (27229) WifiBoard: 设备配网成功,已连接到WiFi网络! I (27229) BluetoothProvisioning: 🔍 [DEBUG] ReportWiFiStatus调用: success=true, client_connected_=true I (27229) BluetoothProvisioning: 向客户端报告设备连接WiFi成功! I (27229) BluetoothProvisioning: 📋 配网流程完成，状态: SUCCESS, client_connected_: true I (27229) BluetoothProvisioning: ⏰ 延迟2000ms后重启设备以确保配置生效... I (27989) WifiBoard: BLE provisioning completed successfully I (27989) BluetoothProvisioning: 停止蓝牙配网... I (27989) BluetoothProvisioning: 广播已停止 W (27989) BT_HCI: hci cmd send: disconnect: hdl 0x1, rsn:0x13 I (27989) BluetoothProvisioning: 📱 客户端已断开连接, reason=0x16, 当前状态: SUCCESS I (27989) BluetoothProvisioning: 🔍 [DEBUG] 设置client_connected_为false I (27989) BluetoothProvisioning: 🔄 配网状态变化: SUCCESS -> ADVERTISING I (27989) WifiBoard: BLE client disconnected I (27989) BluetoothProvisioning: 📡 广播数据设置完成，配置扫描响应数据 I (27989) BluetoothProvisioning: 📡 扫描响应数据设置完成，启动广播 I (27989) BluetoothProvisioning: 🔄 配网状态变化: ADVERTISING -> IDLE I (27989) BluetoothProvisioning: 蓝牙配网已停止 E (27989) esp_netif_lwip: esp_netif_new_api: Failed to configure netif with config=0x3fcb5960 (config or if_key is NULL or duplicate key) assert failed: esp_netif_create_default_wifi_sta wifi_default.c:422 (netif) Backtrace: 0x40379d89:0x3fcb5800 0x40386cfd:0x3fcb5820 0x4038e465:0x3fcb5840 0x4215e6d7:0x3fcb5960 0x421083c9:0x3fcb5990 0x420262d2:0x3fcb5a70 0x420263c1:0x3fcb5aa0 --- 0x40379d89: panic_abort at /Users/rdzleo/esp/esp-idf/v5.4.2/esp-idf/components/esp_system/panic.c:469 --- 0x40386cfd: esp_system_abort at /Users/rdzleo/esp/esp-idf/v5.4.2/esp-idf/components/esp_system/port/esp_system_chip.c:87 --- 0x4038e465: __assert_func at /Users/rdzleo/esp/esp-idf/v5.4.2/esp-idf/components/newlib/assert.c:80 --- 0x4215e6d7: esp_netif_create_default_wifi_sta at /Users/rdzleo/esp/esp-idf/v5.4.2/esp-idf/components/esp_wifi/src/wifi_default.c:422 --- 0x421083c9: WifiStation::Start() at /Users/rdzleo/Desktop/Baji_Rtc_Toy/managed_components/78__esp-wifi-connect/wifi_station.cc:101 --- 0x420262d2: WifiBoard::MonitorBleProvisioning() at /Users/rdzleo/Desktop/Baji_Rtc_Toy/main/boards/common/wifi_board.cc:504 --- 0x420263c1: WifiBoard::StartBleProvisioning()::{lambda(void*)#1}::_FUN(void*) at /Users/rdzleo/Desktop/Baji_Rtc_Toy/main/boards/common/wifi_board.cc:426 --- (inlined by) _FUN at /Users/rdzleo/Desktop/Baji_Rtc_Toy/main/boards/common/wifi_board.cc:428 ELF file SHA256: bbf9adf60 Rebooting... ESP-ROM:esp32s3-20210327 Build:Mar 27 2021 rst:0xc (RTC_SW_CPU_RST),boot:0x2b (SPI_FAST_FLASH_BOOT) Saved PC:0x42065eba --- 0x42065eba: rw_schedule at ??:? SPIWP:0xee mode:DIO, clock div:1 load:0x3fce2820,len:0x56c load:0x403c8700,len:0x4 load:0x403c8704,len:0xb88 load:0x403cb700,len:0x2df4 entry 0x403c88f4 I (47) WeatherApi: 初始化天气API配置 - 默认城市: 北京 I (48) WeatherApi: WiFi位置缓存限制已设置为: 5 条 I (48) coexist: coex firmware version: 7b9a184 I (49) coexist: coexist rom version e7ae62f I (49) main_task: Started on CPU0 I (59) main_task: Calling app_main() I (79) BackgroundTask: background_task started I (79) BluetoothProvisioning: 蓝牙配网对象创建完成 I (79) button: IoT Button Version: 3.5.0 I (79) gpio: GPIO[0]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 I (79) button: IoT Button Version: 3.5.0 I (79) gpio: GPIO[4]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 I (79) Airhub1: Initializing I2C master bus for audio codec... I (79) Airhub1: Scanning I2C bus for devices... I (79) Airhub1: I2C设备在线: 0x18 E (79) i2c.master: I2C transaction unexpected nack detected E (79) i2c.master: s_i2c_synchronous_transaction(945): I2C transaction failed E (79) i2c.master: i2c_master_receive(1261): I2C transaction failed E (79) i2c.master: I2C transaction unexpected nack detected E (79) i2c.master: s_i2c_synchronous_transaction(945): I2C transaction failed E (79) i2c.master: i2c_master_receive(1261): I2C transaction failed I (79) Airhub1: I2C设备在线: 0x40 I (79) Airhub1: I2C scan completed. Found 2 devices I (79) DZBJ: 开始初始化显示硬件... I (79) gpio: GPIO[7]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 I (79) st77916: LCD panel create success, version: 1.0.1 W (209) st77916: The 3Ah command has been used and will be overwritten by external initialization sequence I (329) LCD: LCD GRAM cleared (black filled) I (329) DZBJ: LCD 硬件初始化完成 I (329) gpio: GPIO[5]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:2 I (329) gpio: GPIO[6]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 I (729) CST816S: IC id: 182 I (729) LCD: Touch controller initialized successfully I (729) LVGL: Starting LVGL task I (729) LCD: LVGL buffer: 14400 bytes (W:360, Lines:20, DMA, single) I (729) LCD: Touch controller added to LVGL I (729) DZBJ: LVGL 初始化完成 I (839) Airhub1: 🤖 AI对话模式启动 I (839) Airhub1: 初始化按钮... I (839) Airhub1: Boot button initialized on GPIO0 I (839) Airhub1: Volume up button initialized on GPIO-1 I (839) Airhub1: Volume down button initialized on GPIO-1 I (839) Airhub1: 故事按键已初始化，GPIO引脚 =4 I (839) Airhub1: 所有按键已成功初始化！ I (839) Airhub1: IMU传感器未初始化，跳过IoT注册 I (839) Airhub1: Initializing battery monitor... I (839) Airhub1: ADC calibration initialized I (839) Airhub1: 电池状态监控已初始化，GPIO:3 I (839) Airhub1: 非生产测试模式且不在对话状态，姿态传感器业务已禁用以节约资源 I (839) PowerSaveTimer: Power save timer enabled I (839) Airhub1: 🔋 PowerSaveTimer已启用，20秒无活动将进入低功耗模式 I (839) Airhub1: 电容触摸板按钮已禁用 (ENABLE_TOUCH_PAD_BUTTONS=0) I (839) Application: 打印设置设备状态日志: starting I (839) Application: 正常启动流程，将执行开机播报和网络连接播报 I (839) Airhub1: Initializing audio codec (duplex)... I (839) Airhub1: Creating BoxAudioCodec (ES8311+ES7210, without reference) ... I (839) BoxAudioCodec: Duplex channels created I (849) ES8311: Work in Slave mode I (849) gpio: GPIO[48]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 I (849) ES7210: Work in Slave mode I (859) ES7210: Enable ES7210_INPUT_MIC1 I (859) ES7210: Enable ES7210_INPUT_MIC2 I (869) BoxAudioCodec: BoxAudioDevice initialized (duplex) I (869) Airhub1: Audio codec initialized successfully I (869) Application: 检测到WiFi板卡，将opus编码器复杂度设置为3 I (869) OpusResampler: Resampler configured with input sample rate 16000, output sample rate 8000, and channels 1 I (869) I2S_IF: channel mode 2 bits:16/16 channel:2 mask:1 I (869) I2S_IF: TDM Mode 0 bits:16/16 channel:2 sample_rate:16000 mask:1 I (869) I2S_IF: channel mode 0 bits:16/16 channel:2 mask:1 I (869) I2S_IF: STD Mode 1 bits:16/16 channel:2 sample_rate:16000 mask:1 I (869) ES7210: Bits 16 I (879) ES7210: Enable ES7210_INPUT_MIC1 I (879) ES7210: Enable ES7210_INPUT_MIC2 I (889) ES7210: Unmuted I (889) Adev_Codec: Open codec device OK I (889) BoxAudioCodec: Input opened: sr=16000 ch=1 mask=0x1 ref=0 I (889) AudioCodec: Set input enable to true I (889) I2S_IF: channel mode 0 bits:16/16 channel:2 mask:1 I (889) I2S_IF: STD Mode 1 bits:16/16 channel:2 sample_rate:16000 mask:1 I (909) Adev_Codec: Open codec device OK I (909) AudioCodec: Set output enable to true I (909) AudioCodec: Audio codec started I (1009) Airhub1: ADC: 2379, 原始电压: 2.38V, 计算电池电压: 10.32V, 电量: 100%, 满电电压: 4.20V I (1009) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (1109) Airhub1: ADC: 2377, 原始电压: 2.38V, 计算电池电压: 10.32V, 电量: 100%, 满电电压: 4.20V I (1109) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (1209) Airhub1: ADC: 2377, 原始电压: 2.38V, 计算电池电压: 10.32V, 电量: 100%, 满电电压: 4.20V I (1209) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (1329) Airhub1: ADC: 2376, 原始电压: 2.38V, 计算电池电压: 10.31V, 电量: 100%, 满电电压: 4.20V I (1329) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (1429) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V I (1429) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (1529) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V I (1529) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (1649) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V I (1649) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (1749) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V I (1749) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (1869) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V I (1869) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (1939) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V I (1939) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (1969) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V I (1969) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (2069) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V I (2069) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (2169) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V I (2169) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (2269) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V I (2269) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (2369) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V I (2369) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (2469) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V I (2469) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (2569) Airhub1: ADC: 2375, 原始电压: 2.38V, 计算电池电压: 10.31V, 电量: 100%, 满电电压: 4.20V I (2569) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (2669) Airhub1: ADC: 2375, 原始电压: 2.38V, 计算电池电压: 10.31V, 电量: 100%, 满电电压: 4.20V I (2669) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (2769) Airhub1: ADC: 2375, 原始电压: 2.38V, 计算电池电压: 10.31V, 电量: 100%, 满电电压: 4.20V I (2769) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (2939) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V I (2939) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (2959) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V I (2959) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (3059) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V I (3059) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (3059) AudioCodec: 将运行时输出音量设置为：75 I (3059) Application: 设备启动完成，播放开机播报语音 I (3059) pp: pp rom version: e7ae62f I (3059) net80211: net80211 rom version: e7ae62f I (3069) wifi:wifi driver task: 3fcdc36c, prio:23, stack:6656, core=0 I (3069) wifi:wifi firmware version: bea31f3 I (3069) wifi:wifi certification version: v7.0 I (3069) wifi:config NVS flash: disabled I (3069) wifi:config nano formatting: disabled I (3069) wifi:Init data frame dynamic rx buffer num: 32 I (3069) wifi:Init dynamic rx mgmt buffer num: 5 I (3069) wifi:Init management short buffer num: 32 I (3069) wifi:Init static tx buffer num: 8 I (3069) wifi:Init tx cache buffer num: 32 I (3069) wifi:Init static tx FG buffer num: 2 I (3069) wifi:Init static rx buffer size: 1600 I (3069) wifi:Init static rx buffer num: 10 I (3069) wifi:Init dynamic rx buffer num: 32 I (3069) wifi_init: rx ba win: 16 I (3069) wifi_init: accept mbox: 6 I (3069) wifi_init: tcpip mbox: 32 I (3069) wifi_init: udp mbox: 6 I (3069) wifi_init: tcp mbox: 6 I (3069) wifi_init: tcp tx win: 5760 I (3069) wifi_init: tcp rx win: 5760 I (3069) wifi_init: tcp mss: 1440 I (3069) wifi_init: WiFi/LWIP prefer SPIRAM I (3069) phy_init: phy_version 701,f4f1da3a,Mar 3 2025,15:50:10 I (3109) phy_init: Saving new calibration data due to checksum failure or outdated calibration data, mode(0) I (3109) Application: 开始播放下行音频: 样本=960 采样率=16000 I (3119) wifi:mode : sta (d0:cf:13:03:bb:f0) I (3129) wifi:enable tsf I (5539) wifi: 发现可连接 AP: airhub, BSSID: 70:2a:d7:85:bc:eb, RSSI: -31, Channel: 1, Authmode: 3 I (5539) WifiBoard: Starting WiFi connection, playing network connection sound W (5539) wifi:Password length matches WPA2 standards, authmode threshold changes from OPEN to WPA2 I (5639) wifi:new:<1,0>, old:<1,0>, ap:<255,255>, sta:<1,0>, prof:1, snd_ch_cfg:0x0 I (5639) wifi:state: init -> auth (0xb0) I (5659) wifi:state: auth -> assoc (0x0) I (5679) wifi:state: assoc -> run (0x10) I (5709) wifi:connected with airhub, aid = 4, channel 1, BW20, bssid = 70:2a:d7:85:bc:eb I (5709) wifi:security: WPA2-PSK, phy: bgn, rssi: -30 I (5709) wifi:pm start, type: 1 I (5709) wifi:dp: 1, bi: 102400, li: 3, scale listen interval from 307200 us to 307200 us I (5709) wifi:set rx beacon pti, rx_bcn_pti: 14, bcn_timeout: 25000, mt_pti: 14, mt_time: 10000 I (5719) wifi:AP's beacon interval = 102400 us, DTIM period = 1 I (5749) wifi:idx:0 (ifx:0, 70:2a:d7:85:bc:eb), tid:0, ssn:0, winSize:64 I (6839) Airhub1: 📤 设备状态上报已启用，每30秒上报一次 I (9749) wifi: Got IP: 192.168.124.22 I (9749) esp_netif_handlers: sta ip: 192.168.124.22, mask: 255.255.255.0, gw: 192.168.124.1 I (10339) VolcRtcProtocol: 设置Agent配置参数: {"Config":{"WebSearchAgentConfig":{"ParamsString":"{\"bot_id\":\"7585449675889608233\",\"stream\":true,\"location_info\":{\"city\":\"广州市\"}}"}}} I (10339) VolcRtcProtocol: VolcRtcProtocol 开始启动... I (10339) VolcRtcProtocol: 使用配置文件中的设备名称: d0_cf_13_03_bb_f0 I (10339) VolcRtcProtocol: NVS凭证已加载：secret=1 appid=1 device_name=d0_cf_13_03_bb_f0, free_heap=8230100 [INF|volc_rtc.c:597]volc_rtc_create: set param[0]: {"debug":{"log_to_console":1}} [INF|volc_rtc.c:597]volc_rtc_create: set param[1]: {"audio":{"codec":{"internal":{"enable":1}}}} [INF|volc_rtc.c:597]volc_rtc_create: set param[2]: {"rtc":{"access":{"concurrent_requests":1}}} [INF|volc_rtc.c:597]volc_rtc_create: set param[3]: {"rtc":{"ice":{"concurrent_agents":1}}} 2026-03-24 16:18:55.587 [I] VolcEngineRTCLite.c:153 ****************** HELLO BOOKA (68f0bc7617b8520178bef12c)(1.57.207.001)(HASH-5c3aa20fe851886d21cede0115044e17c3ec8a67) ******************** 2026-03-24 16:18:55.588 [I] VolcEngineRTCLite.c:158 Platform esp32s3 2026-03-24 16:18:55.588 [I] VolcEngineRTCLite.c:161 OsVersion FreeRTOS/unknown 2026-03-24 16:18:55.588 [I] VolcEngineRTCLite.c:164 CompilerInfo GCC/14.2.0 2026-03-24 16:18:55.589 [I] VolcEngineRTCLite.c:100 BOOKA_DEVICE_LOW_RESOURCE : ON 2026-03-24 16:18:55.589 [I] VolcEngineRTCLite.c:104 BOOKA_ENABLE_EVENT_REPORT : ON 2026-03-24 16:18:55.589 [I] VolcEngineRTCLite.c:108 ENABLE_G722_CODEC : ON 2026-03-24 16:18:55.590 [I] GlobalParams.c:232 pGlobalParams->configParams.rtc.access.concurrent_requests from 2 to 1 2026-03-24 16:18:55.590 [I] GlobalParams.c:233 pGlobalParams->configParams.rtc.ice.concurrent_agents from 2 to 1 2026-03-24 16:18:55.590 [I] GlobalParams.c:239 pGlobalParams->configParams.audio.codec.internal.enable from 0 to 1 2026-03-24 16:18:55.591 [I] GlobalParams.c:244 pGlobalParams->configParams.debug.log_to_console from 0 to 1 2026-03-24 16:18:55.591 [I] GlobalParams.c:247 pGlobalParams->configParams.rtc.root_path to . 2026-03-24 16:18:55.593 [E] Cache.c:273 operation returned status code: 0x00000009 2026-03-24 16:18:55.598 [E] SocketConnection-Lite.c:191 bind local ip failed 2026-03-24 16:18:55.601 [I] LiteResolver.c:213 start resolve rtc-log-service.volcvideo.com by sep thread 2026-03-24 16:18:55.604 [I] API byte_rtc_set_audio_codec engine 0x3c5340e0 audio_codec_type 4 2026-03-24 16:18:55.605 [I] Common.c:82 rtcAudioCodec2SdkAudioCodec codec 5 2026-03-24 16:18:55.606 [I] API byte_rtc_set_video_codec engine 0x3c5340e0 video_codec_type 0 I (10359) VolcRtcProtocol: RTC实例已准备就绪；房间加入将在监听状态后执行 I (10359) Application: 🌐 开始初始化WebSocket协议... I (10359) Application: 🔧 创建WebsocketProtocol实例 I (10359) Application: 🚀 启动WebSocket协议 I (10359) Application: ✅ WebSocket协议初始化完成 I (10359) VolcRtcProtocol: VolcRtcProtocol初始化任务已创建 I (10359) EspHttp: Opening HTTP connection to https://xiaozhi-dev-web.goods.fun/xiaozhi/ota/ I (10369) Application: 打印设置设备状态日志: idle I (10379) AI_CHAT_UI: GIF表情切换: neutral I (10379) Application: Entering idle state, playing standby sound I (10389) WeatherApi: [AutoDetectAndSetLocation] 调用全局函数自动检测位置 I (10389) WeatherApi: [AutoDetectLocation] ===== 开始自动检测位置 ===== I (10389) WeatherApi: [AutoDetectLocation] 从NVS命中位置: '广州市'，已更新默认城市 I (10389) WeatherApi: [AutoDetectLocation] ===== 位置检测完成 ===== I (10389) main_task: Returned from app_main() 2026-03-24 16:18:55.656 [I] LiteResolver.c:213 start resolve rtc-log-info.volcvideo.com by sep thread 2026-03-24 16:18:55.658 [I] LiteResolver.c:213 start resolve access.rtc.volcvideo.com by sep thread I (10489) wifi:idx:1 (ifx:0, 70:2a:d7:85:bc:eb), tid:3, ssn:0, winSize:64 I (10699) esp-x509-crt-bundle: Certificate validated I (11259) Ota: HTTP response status code: 0 I (11259) Ota: Server role: , Device role: RTC_Test W (11259) Ota: Role mismatch (Device:RTC_Test vs Server:), upgrade denied W (11259) Ota: ✗ Upgrade conditions not met - Role: ✗, Version check: skipped I (11259) Ota: Running partition: ota_0 2026-03-25 00:18:56.724 [E] Cache.c:311 operation returned status code: 0x00000009 2026-03-25 00:18:56.942 [I] IceAgent.c:2533 cur nominatedCandidatePair local 192.168.124.22:0 remote 59.38.99.250:443 state ICE_CANDIDATE_PAIR_STATE_SUCCEEDED I (12939) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V I (12939) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2 I (17189) Airhub1: BOOT长按3秒：切换设备模式 I (17189) Airhub1: AI模式 → 吧唧模式 I (17199) DeviceMode: 模式切换为 吧唧，即将重启... I (17699) wifi:state: run -> init (0x0) I (17699) wifi:pm stop, total sleep time: 7184443 us / 11986157 us I (17699) wifi:idx:0, tid:0 I (17699) wifi:idx:1, tid:3 I (17699) wifi:new:<1,0>, old:<1,0>, ap:<255,255>, sta:<1,0>, prof:1, snd_ch_cfg:0x0 I (17699) wifi: Reconnecting airhub (attempt 1 / 5) I (17739) wifi:flush txq I (17739) wifi:stop sw txq I (17739) wifi:lmac stop hw txq ESP-ROM:esp32s3-20210327 Build:Mar 27 2021 rst:0xc (RTC_SW_CPU_RST),boot:0x2b (SPI_FAST_FLASH_BOOT) Saved PC:0x40379ccd --- 0x40379ccd: esp_restart_noos at /Users/rdzleo/esp/esp-idf/v5.4.2/esp-idf/components/esp_system/port/soc/esp32s3/system_internal.c:162 SPIWP:0xee mode:DIO, clock div:1 load:0x3fce2820,len:0x56c load:0x403c8700,len:0x4 load:0x403c8704,len:0xb88 load:0x403cb700,len:0x2df4 entry 0x403c88f4 I (47) WeatherApi: 初始化天气API配置 - 默认城市: 北京 I (48) WeatherApi: WiFi位置缓存限制已设置为: 5 条 I (48) coexist: coex firmware version: 7b9a184 I (48) coexist: coexist rom version e7ae62f I (49) main_task: Started on CPU0 I (59) main_task: Calling app_main() I (79) Application: 🎴 吧唧模式：跳过 WiFi/协议/音频初始化 I (79) Application: 打印设置设备状态日志: idle I (79) BluetoothProvisioning: 蓝牙配网对象创建完成 I (79) button: IoT Button Version: 3.5.0 I (79) gpio: GPIO[0]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 I (79) button: IoT Button Version: 3.5.0 I (79) gpio: GPIO[4]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 I (79) Airhub1: Initializing I2C master bus for audio codec... I (79) Airhub1: Scanning I2C bus for devices... I (79) Airhub1: I2C设备在线: 0x18 E (79) i2c.master: I2C transaction unexpected nack detected E (79) i2c.master: s_i2c_synchronous_transaction(945): I2C transaction failed E (79) i2c.master: i2c_master_receive(1261): I2C transaction failed E (79) i2c.master: I2C transaction unexpected nack detected E (79) i2c.master: s_i2c_synchronous_transaction(945): I2C transaction failed E (79) i2c.master: i2c_master_receive(1261): I2C transaction failed I (79) Airhub1: I2C设备在线: 0x40 I (79) Airhub1: I2C scan completed. Found 2 devices I (79) DZBJ: 开始初始化显示硬件... I (79) gpio: GPIO[7]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 I (79) st77916: LCD panel create success, version: 1.0.1 W (209) st77916: The 3Ah command has been used and will be overwritten by external initialization sequence I (329) LCD: LCD GRAM cleared (black filled) I (329) DZBJ: LCD 硬件初始化完成 I (329) gpio: GPIO[5]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:2 I (329) gpio: GPIO[6]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 I (729) CST816S: IC id: 182 I (729) LCD: Touch controller initialized successfully I (729) LVGL: Starting LVGL task I (729) LCD: LVGL buffer: 14400 bytes (W:360, Lines:20, DMA, single) I (729) LCD: Touch controller added to LVGL I (729) DZBJ: LVGL 初始化完成 I (729) DZBJ: UI 初始化完成 I (829) DZBJ: 背光已点亮，dzbj 显示模块初始化完成 I (829) Airhub1: 🎴 电子吧唧模式启动 I (829) Airhub1: 初始化吧唧模式按钮... I (829) Airhub1: Boot button initialized on GPIO0 I (829) Airhub1: 吧唧模式按钮初始化完成 I (829) Airhub1: 初始化电子吧唧模式外设... I (939) FATFS: SPIFFS: Total size: 2763761, Used: 78061 I (989) IMG_LIST: 开始扫描SPIFFS中的图片文件 I (989) IMG_LIST: 发现图片文件: 03.jpg I (989) IMG_LIST: 发现图片文件: 02.jpg I (989) IMG_LIST: 发现图片文件: default.jpg I (1039) IMG_LIST: 图片列表初始化完成，共发现 3 张图片 I (1039) IMG_LIST: 设置默认图片索引: 2 I (1039) gpio: GPIO[4]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:2 I (1039) DZBJ_BTN: 按键初始化完成 (KEY2=GPIO4，BOOT由iot_button处理) I (1039) DZBJ_BAT: ADC校准初始化成功 I (1039) DZBJ_BAT: 电池ADC初始化完成 (GPIO3, ADC1_CH2, 分压比=2) I (1039) DZBJ_BAT: ADC原始值=2838, ADC电压=2372mV, 电池电压=4744mV, 电量=100% I (1039) DZBJ_BAT: 电池监控任务已启动，更新间隔5000ms I (1039) BLE_INIT: BT controller compile version [6cfabcd] I (1039) BLE_INIT: Feature Config, ADV:1, BLE_50:1, DTM:1, SCAN:1, CCA:0, SMP:1, CONNECT:1 I (1049) BLE_INIT: Bluetooth MAC: d0:cf:13:03:bb:f2 I (1049) phy_init: phy_version 701,f4f1da3a,Mar 3 2025,15:50:10 I (1079) phy_init: Saving new calibration data due to checksum failure or outdated calibration data, mode(0) I (1149) DZBJ_BLE: GATT server register, status 0, app_id 0 I (1149) DZBJ_BLE: 图片传输服务创建成功，句柄: 28 I (1149) DZBJ_BLE: 图片写入特征创建成功,句柄: 42 I (1149) DZBJ_BLE: 图片编辑特征创建成功,句柄: 44 I (1149) DZBJ_BLE: BLE MAC: d0:cf:13:03:bb:f2 I (1149) DZBJ_BLE: 蓝牙设备名称: Airhub_d0:cf:13:03:bb:f2 I (1149) DZBJ_BLE: Advertising data set, status 0 I (1149) DZBJ_BLE: Scan response data set, status 0 I (1149) DZBJ_BLE: Advertising start successfully I (1149) SLEEP: 休眠管理器初始化完成（超时=10s） I (1149) Airhub1: 电子吧唧模式初始化完成 I (1149) main_task: Returned from app_main() I (6039) DZBJ_BAT: ADC原始值=2841, ADC电压=2375mV, 电池电压=4750mV, 电量=100% I (11039) DZBJ_BAT: ADC原始值=2841, ADC电压=2375mV, 电池电压=4750mV, 电量=100% I (14509) DZBJ_BLE: Connected, conn_id 0, remote 73:8f:af:0d:36:7a I (14539) DZBJ_BLE: PHY update, status 0, tx_phy 1, rx_phy 1 I (14879) DZBJ_BLE: Connection params update, status 0, conn_int 12, latency 0, timeout 400 I (15039) DZBJ_BLE: Connection params update, status 0, conn_int 6, latency 0, timeout 500 I (15179) DZBJ_BLE: Connection params update, status 0, conn_int 12, latency 0, timeout 400 I (16039) DZBJ_BAT: ADC原始值=2839, ADC电压=2372mV, 电池电压=4744mV, 电量=100% I (16329) DZBJ_BLE: PHY update, status 0, tx_phy 2, rx_phy 2 W (17429) BT_HCI: hcif disc complete: hdl 0x1, rsn 0x13 dev_find 1 I (17429) DZBJ_BLE: Disconnected, remote 73:8f:af:0d:36:7a, reason 0x13 I (17429) DZBJ_BLE: Advertising start successfully I (21039) DZBJ_BAT: ADC原始值=2842, ADC电压=2376mV, 电池电压=4752mV, 电量=100%