diff --git a/.vscode/c_cpp_properties.json b/.vscode/c_cpp_properties.json
index 2c90586..820ca7d 100644
--- a/.vscode/c_cpp_properties.json
+++ b/.vscode/c_cpp_properties.json
@@ -1,25 +1,25 @@
 {
-    "configurations": [
-        {
-            "name": "ESP-IDF",
-            "compilerPath": "D:/CodeBlocks/MinGW/bin/gcc.exe",
-            "compileCommands": [
-                "${config:idf.buildPath}/compile_commands.json"
-            ],
-            "includePath": [
-                "${config:idf.espIdfPath}/components/**",
-                "${config:idf.espIdfPathWin}/components/**",
-                "${workspaceFolder}/**"
-            ],
-            "browse": {
-                "path": [
-                    "${config:idf.espIdfPath}/components",
-                    "${config:idf.espIdfPathWin}/components",
-                    "${workspaceFolder}"
-                ],
-                "limitSymbolsToIncludedHeaders": true
-            }
-        }
-    ],
-    "version": 4
-}
\ No newline at end of file
+  "configurations": [
+    {
+      "name": "ESP-IDF",
+      "compilerPath": "/Users/rdzleo/.espressif/tools/xtensa-esp-elf/esp-14.2.0_20241119/xtensa-esp-elf/bin/xtensa-esp32s3-elf-gcc",
+      "compileCommands": [
+        "${config:idf.buildPath}/compile_commands.json"
+      ],
+      "includePath": [
+        "${config:idf.espIdfPath}/components/**",
+        "${config:idf.espIdfPathWin}/components/**",
+        "${workspaceFolder}/**"
+      ],
+      "browse": {
+        "path": [
+          "${config:idf.espIdfPath}/components",
+          "${config:idf.espIdfPathWin}/components",
+          "${workspaceFolder}"
+        ],
+        "limitSymbolsToIncludedHeaders": true
+      }
+    }
+  ],
+  "version": 4
+}
diff --git a/.vscode/settings.json b/.vscode/settings.json
index 406d0f6..4e7986f 100644
--- a/.vscode/settings.json
+++ b/.vscode/settings.json
@@ -3,11 +3,11 @@
   "idf.espIdfPathWin": "D:/Espressif/frameworks/esp-idf-v5.4.1/",
   "idf.pythonInstallPath": "/opt/homebrew/bin/python3",
   "idf.openOcdConfigs": [
-    "board/esp32s3-builtin.cfg"
+    "board/esp32c3-bridge.cfg"
   ],
   "idf.toolsPathWin": "D:\\Espressif",
   "idf.customExtraVars": {
-    "IDF_TARGET": "esp32s3"
+    "IDF_TARGET": "esp32c3"
   },
   "files.associations": {
     "*.bin": "bibtex",
diff --git a/dependencies.lock b/dependencies.lock
index eef067d..34e1584 100644
--- a/dependencies.lock
+++ b/dependencies.lock
@@ -20,7 +20,7 @@ dependencies:
       type: service
     version: 1.3.1
   espressif/esp_lcd_st77916:
-    component_hash: 5fa0f8b1274576d4484e2b8d9358e2a5d09c721511bef0dce6a55b4206b5f0e9
+    component_hash: c0a565af3ea85a9d9f1e79b0e4d0829378db319bc4dab4939eca44361b3c5a1b
     dependencies:
     - name: espressif/cmake_utilities
       registry_url: https://components.espressif.com
@@ -28,11 +28,11 @@ dependencies:
       version: 0.*
     - name: idf
       require: private
-      version: '>5.0.4,!=5.1.1'
+      version: '>=5.4'
     source:
       registry_url: https://components.espressif.com/
       type: service
-    version: 1.0.1
+    version: 2.0.2
   espressif/esp_lcd_touch:
     component_hash: 779b4ba2464a3ae85681e4b860caa5fdc35801458c23f3039ee761bae7f442a4
     dependencies:
@@ -90,6 +90,6 @@ direct_dependencies:
 - espressif/esp_lvgl_port
 - idf
 - lvgl/lvgl
-manifest_hash: ecdcccdc402053a695b236c22d3cc28aa507b2bda6e01d835e01cd2f42ab7e0e
-target: esp32s3
+manifest_hash: 2e5e8224c989c28cde3f3a2470ecd63548cf45b6263cdcb5a1550808138e5c02
+target: esp32c3
 version: 2.0.0
diff --git a/main/battery/include/battery.h b/main/battery/include/battery.h
index f829ed9..4c38150 100644
--- a/main/battery/include/battery.h
+++ b/main/battery/include/battery.h
@@ -3,7 +3,7 @@
 #include <stdint.h>
 
 // 电池ADC引脚配置
-#define PIN_BAT_ADC             3               // GPIO3
+#define PIN_BAT_ADC             2               // GPIO2
 #define BAT_ADC_CHANNEL         ADC_CHANNEL_2   // ADC1_CH2
 
 // 分压比（实际电池电压 = ADC测量电压 * 此系数）
diff --git a/main/button/include/button.h b/main/button/include/button.h
index 0b27203..37425ce 100644
--- a/main/button/include/button.h
+++ b/main/button/include/button.h
@@ -2,8 +2,8 @@
 #include "esp_err.h"
 
 // 按键引脚定义
-#define PIN_BTN_BOOT    0   // GPIO0 BOOT按键（低电平有效）
-#define PIN_BTN_KEY2    4   // GPIO4 KEY2按键（低电平有效）
+#define PIN_BTN_BOOT    9   // GPIO9 BOOT按键（低电平有效）
+#define PIN_BTN_KEY2    8   // GPIO8 KEY2按键（低电平有效）
 
 // 按键事件回调函数类型
 typedef void (*btn_event_cb_t)(int gpio_num, void *usr_data);
diff --git a/main/fatfs/fatfs.c b/main/fatfs/fatfs.c
index ee9bd56..784161e 100644
--- a/main/fatfs/fatfs.c
+++ b/main/fatfs/fatfs.c
@@ -528,9 +528,11 @@ bool fats_img_isOK(char* img_path){
     return true;
 }
 
-// 解码图片
+// 解码图片（使用1:2缩放，ESP32-C3内存有限，全尺寸360×360×2=253KB超出可用堆）
 esp_err_t DecodeImg(char *imgpath,uint8_t** imgData,esp_jpeg_image_output_t *outimage)
 {
+    *imgData = NULL;
+
     FILE *f = fopen(imgpath, "rb");
     if(f == NULL){
         ESP_LOGE(TAG, "OPEN ERROR");
@@ -538,56 +540,64 @@ esp_err_t DecodeImg(char *imgpath,uint8_t** imgData,esp_jpeg_image_output_t *out
     }
     struct stat file_stat;
     stat(imgpath, &file_stat);
-    *imgData = malloc(360 * 360 *2);
-    // printf("文件大小:%d,分配地址:%p\n",(int)file_stat.st_size,*imgData);
+
+    // 先分配输入缓冲区并读取JPEG文件
     uint8_t *imgEncoderData = malloc(file_stat.st_size);
     if (imgEncoderData == NULL) {
-        ESP_LOGE(TAG, "输入缓冲区分配失败（内存不足，需%d字节）", (int)file_stat.st_size);
-        free(*imgData);
+        ESP_LOGE(TAG, "输入缓冲区分配失败（需%d字节）", (int)file_stat.st_size);
         fclose(f);
         return ESP_FAIL;
     }
-    size_t read_len = fread(imgEncoderData,sizeof(uint8_t),file_stat.st_size,f);
-    if (read_len != file_stat.st_size) {
-        ESP_LOGE(TAG, "文件读取不完整（预期：%d 字节，实际：%zu 字节）", 
-                (int)file_stat.st_size, read_len);
-        free(imgEncoderData);
-        free(*imgData);
-        fclose(f);
-        return ESP_FAIL;
-    }
-    if (file_stat.st_size < 2) {
-        ESP_LOGE(TAG, "文件过小,不是有效JPEG");
-        free(imgEncoderData);
-        free(*imgData);
-        return ESP_FAIL;
-    }
-    if (imgEncoderData[0] != 0xFF || imgEncoderData[1] != 0xD8) {
-        ESP_LOGE(TAG, "JPEG起始标记缺失");
-        free(imgEncoderData);
-        free(*imgData);
-        return ESP_FAIL;
-    }
-    if (imgEncoderData[file_stat.st_size - 2] != 0xFF || imgEncoderData[file_stat.st_size - 1] != 0xD9) {
-        ESP_LOGE(TAG, "JPEG结束标记缺失");
-        free(imgEncoderData);
-        free(*imgData);
-        return ESP_FAIL;
-    }
+    size_t read_len = fread(imgEncoderData, sizeof(uint8_t), file_stat.st_size, f);
     fclose(f);
-    uint32_t outbuf_size = 360 * 360 * sizeof(uint8_t) * 2;
+
+    if (read_len != file_stat.st_size) {
+        ESP_LOGE(TAG, "文件读取不完整（预期：%d，实际：%zu）", (int)file_stat.st_size, read_len);
+        free(imgEncoderData);
+        return ESP_FAIL;
+    }
+    if (file_stat.st_size < 2 || imgEncoderData[0] != 0xFF || imgEncoderData[1] != 0xD8) {
+        ESP_LOGE(TAG, "无效JPEG文件");
+        free(imgEncoderData);
+        return ESP_FAIL;
+    }
+
+    // 配置JPEG解码（1:2缩放，输出缓冲区从253KB降至~63KB）
     esp_jpeg_image_cfg_t jpeg_cfg = {
         .indata = imgEncoderData,
         .indata_size = file_stat.st_size,
-        .outbuf = *imgData,
-        .outbuf_size = outbuf_size,
         .out_format = JPEG_IMAGE_FORMAT_RGB565,
+        .out_scale = JPEG_IMAGE_SCALE_1_2,
         .flags = {
-            .swap_color_bytes = true, // 启用字节交换，适配 LVGL 8.3.11 RGB565 格式
+            .swap_color_bytes = true,
         },
     };
-    esp_err_t ret = esp_jpeg_decode(&jpeg_cfg,outimage);
+
+    // 先获取缩放后的图片尺寸，精确分配输出缓冲区
+    esp_jpeg_image_output_t img_info;
+    esp_err_t ret = esp_jpeg_get_image_info(&jpeg_cfg, &img_info);
+    if (ret != ESP_OK) {
+        ESP_LOGE(TAG, "获取JPEG信息失败");
+        free(imgEncoderData);
+        return ESP_FAIL;
+    }
+
+    *imgData = malloc(img_info.output_len);
+    if (*imgData == NULL) {
+        ESP_LOGE(TAG, "输出缓冲区分配失败（需%zu字节）", img_info.output_len);
+        free(imgEncoderData);
+        return ESP_ERR_NO_MEM;
+    }
+
+    jpeg_cfg.outbuf = *imgData;
+    jpeg_cfg.outbuf_size = img_info.output_len;
+    ret = esp_jpeg_decode(&jpeg_cfg, outimage);
+
     free(imgEncoderData);
+    if (ret != ESP_OK) {
+        free(*imgData);
+        *imgData = NULL;
+    }
     return ret;
 }
 
diff --git a/main/gpio/gpio.c b/main/gpio/gpio.c
index 6bc3ab9..ad6b7c8 100644
--- a/main/gpio/gpio.c
+++ b/main/gpio/gpio.c
@@ -6,7 +6,7 @@
 #include "esp_lvgl_port.h"
 
 void test_display(esp_lcd_panel_handle_t panel_handle){
-    uint16_t *color_buf = malloc(LCD_WID * 100 * sizeof(uint16_t));  // 10行，每行360像素（RGB565）
+    uint16_t *color_buf = malloc(LCD_WID * 100 * sizeof(uint16_t));
     if (color_buf == NULL) {
         ESP_LOGE(LCD_TAG, "红色缓冲区分配失败");
         return;
@@ -29,71 +29,25 @@ void test_display(esp_lcd_panel_handle_t panel_handle){
 }
 
 void test_gpio(){
+    // SPI LCD引脚测试（C3适配）
     gpio_config_t led_conf = {};
+    led_conf.mode = GPIO_MODE_OUTPUT;
+    led_conf.pull_up_en = GPIO_PULLUP_DISABLE;
+    led_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
+    led_conf.intr_type = GPIO_INTR_DISABLE;
+
     led_conf.pin_bit_mask = (1ULL << PIN_LCD_CLK);
-    led_conf.mode = GPIO_MODE_OUTPUT;
-    led_conf.pull_up_en = GPIO_PULLUP_DISABLE;
-    led_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
-    led_conf.intr_type = GPIO_INTR_DISABLE;
     gpio_config(&led_conf);
 
-    led_conf.pin_bit_mask = (1ULL << PIN_LCD_D0);
-    led_conf.mode = GPIO_MODE_OUTPUT;
-    led_conf.pull_up_en = GPIO_PULLUP_DISABLE;
-    led_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
-    led_conf.intr_type = GPIO_INTR_DISABLE;
-    gpio_config(&led_conf);
-
-    led_conf.pin_bit_mask = (1ULL << PIN_LCD_D1);
-    led_conf.mode = GPIO_MODE_OUTPUT;
-    led_conf.pull_up_en = GPIO_PULLUP_DISABLE;
-    led_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
-    led_conf.intr_type = GPIO_INTR_DISABLE;
-    gpio_config(&led_conf);
-
-    led_conf.pin_bit_mask = (1ULL << PIN_LCD_D2);
-    led_conf.mode = GPIO_MODE_OUTPUT;
-    led_conf.pull_up_en = GPIO_PULLUP_DISABLE;
-    led_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
-    led_conf.intr_type = GPIO_INTR_DISABLE;
-    gpio_config(&led_conf);
-
-    led_conf.pin_bit_mask = (1ULL << PIN_LCD_D3);
-    led_conf.mode = GPIO_MODE_OUTPUT;
-    led_conf.pull_up_en = GPIO_PULLUP_DISABLE;
-    led_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
-    led_conf.intr_type = GPIO_INTR_DISABLE;
-    gpio_config(&led_conf);
-
-    led_conf.pin_bit_mask = (1ULL << PIN_LCD_RST);
-    led_conf.mode = GPIO_MODE_OUTPUT;
-    led_conf.pull_up_en = GPIO_PULLUP_DISABLE;
-    led_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
-    led_conf.intr_type = GPIO_INTR_DISABLE;
+    led_conf.pin_bit_mask = (1ULL << PIN_LCD_MOSI);
     gpio_config(&led_conf);
 
     led_conf.pin_bit_mask = (1ULL << PIN_LCD_CS);
-    led_conf.mode = GPIO_MODE_OUTPUT;
-    led_conf.pull_up_en = GPIO_PULLUP_DISABLE;
-    led_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
-    led_conf.intr_type = GPIO_INTR_DISABLE;
-    
     gpio_config(&led_conf);
 
-    led_conf.pin_bit_mask = (1ULL << 36);
-    led_conf.mode = GPIO_MODE_OUTPUT;
-    led_conf.pull_up_en = GPIO_PULLUP_DISABLE;
-    led_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
-    led_conf.intr_type = GPIO_INTR_DISABLE;
-    
+    led_conf.pin_bit_mask = (1ULL << PIN_LCD_DC);
     gpio_config(&led_conf);
-    gpio_set_level(36,1);
 
-    // gpio_set_level(PIN_LCD_CS,1);
-    // gpio_set_level(PIN_LCD_RST,0);
-    // gpio_set_level(PIN_LCD_CLK,1);
-    // gpio_set_level(PIN_LCD_D0,0);
-    // gpio_set_level(PIN_LCD_D1,1);
-    // gpio_set_level(PIN_LCD_D2,0);
-    // gpio_set_level(PIN_LCD_D3,1);
-}
\ No newline at end of file
+    led_conf.pin_bit_mask = (1ULL << PIN_LCD_BL);
+    gpio_config(&led_conf);
+}
diff --git a/main/gpio/include/gpio.h b/main/gpio/include/gpio.h
index 3b7e14b..abe4766 100644
--- a/main/gpio/include/gpio.h
+++ b/main/gpio/include/gpio.h
@@ -1,33 +1,31 @@
 #include "esp_lvgl_port.h"
 
-#define PIN_NUM_SCL 18      //引脚18 SCL
-#define PIN_NUM_SDA 17      //引脚17 SDA
-#define I2C_MASTER_FREQ_HZ  100000
-#define I2C_MASTER_NUM I2C_NUM_0    // I2C 主机编号 0
+// I2C引脚（参考spi_lcd项目）
+#define PIN_NUM_SCL 1       // GPIO1 SCL
+#define PIN_NUM_SDA 0       // GPIO0 SDA
+#define I2C_MASTER_FREQ_HZ  400000          // I2C频率400KHz
+#define I2C_MASTER_NUM I2C_NUM_0            // I2C主机编号0
 
-#define PIN_LCD_EN 1        //引脚1 使能
-#define PIN_LCD_D0 11       //引脚11 数据0
-#define PIN_LCD_D1 13       //引脚13 数据1
-#define PIN_LCD_D2 14       //引脚14 数据2
-#define PIN_LCD_D3 21       //引脚21 数据3
-#define PIN_LCD_CLK 12      //引脚12 时钟
-#define PIN_LCD_CS 47       //引脚47 片选
-#define PIN_LCD_RST 7       //引脚7 复位
+// SPI LCD引脚（参考spi_lcd项目，标准SPI模式）
+#define PIN_LCD_BL 7        // GPIO7 背光（低电平有效）
+#define PIN_LCD_MOSI 5      // GPIO5 SPI MOSI
+#define PIN_LCD_CLK 3       // GPIO3 SPI CLK
+#define PIN_LCD_CS 4        // GPIO4 片选
+#define PIN_LCD_DC 6        // GPIO6 数据/命令选择（SPI模式必需）
+#define PIN_LCD_RST -1      // 不使用硬复位
 
 #define LCD_HIGH 360
 #define LCD_WID 360
 
-#define PIN_TP_RST 6        //引脚6 复位
-#define PIN_TP_INT 5        //引脚4 中断
+// 触摸引脚
+#define PIN_TP_RST -1       // 不使用硬复位
+#define PIN_TP_INT 10       // GPIO10 触摸中断
 
 #define LCD_TAG "LCD"
-#define SPI_LCD_HOST SPI2_HOST    // SPI 主机编号 2
+#define SPI_LCD_HOST SPI2_HOST    // SPI主机编号2
 
-#define PIN_MOTOR_EN -1     // 电机使能
-#define PIN_BAT_ADC 3       // 电池ADC检测引脚（ADC1_CH2）
-
-// 注意：V1.0原理图中 GPIO4=KEY2按键, GPIO5=TP_INT
-// 如果触摸不工作，请检查 PIN_TP_INT 是否与硬件版本匹配
+#define PIN_MOTOR_EN -1     // 电机使能（未使用）
+#define PIN_BAT_ADC 2       // GPIO2 电池ADC检测引脚（ADC1_CH2）
 
 void test_display(esp_lcd_panel_handle_t panel_handle);
-void test_gpio();
\ No newline at end of file
+void test_gpio();
diff --git a/main/idf_component.yml b/main/idf_component.yml
index 9617bb5..0e3ab61 100644
--- a/main/idf_component.yml
+++ b/main/idf_component.yml
@@ -2,7 +2,7 @@ dependencies:
   esp_lvgl_port: 2.5.0
   lvgl/lvgl:
     version: 8.3.11
-  esp_lcd_st77916: 1.0.1
+  esp_lcd_st77916: "^2.0.2"
   esp_lcd_touch: 1.1.2
   esp_lcd_touch_cst816s: 1.1.0
   esp_jpeg: 1.3.1
\ No newline at end of file
diff --git a/main/lcd/include/lcd.h b/main/lcd/include/lcd.h
index 3d3176b..b3b2c19 100644
--- a/main/lcd/include/lcd.h
+++ b/main/lcd/include/lcd.h
@@ -1,3 +1,4 @@
+#include <stdbool.h>
 #include "esp_lvgl_port.h"
 #include "esp_lcd_st77916.h"
 
@@ -6,4 +7,5 @@ void lcd_init();
 void lvgl_lcd_init();
 void touch_init();
 void get_touch(uint16_t* touchx,uint16_t* touchy);
-void lcd_clear_screen_black(void);  // 清空LCD GRAM为黑色
\ No newline at end of file
+void lcd_clear_screen_black(void);  // 清空LCD GRAM为黑色
+void lcd_disp_on_off(bool on_off);  // LCD显示开关
\ No newline at end of file
diff --git a/main/lcd/lcd.c b/main/lcd/lcd.c
index d001227..1c7c332 100644
--- a/main/lcd/lcd.c
+++ b/main/lcd/lcd.c
@@ -5,8 +5,6 @@
 #include "esp_log.h"
 #include "lcd.h"
 #include "esp_lcd_touch_cst816s.h"
-#include "unity.h"
-#include "unity_test_runner.h"
 #include <string.h>
 #include "esp_heap_caps.h"
 
@@ -16,43 +14,248 @@ static esp_lcd_panel_io_handle_t io_handle = NULL;
 static esp_lcd_touch_handle_t touch_handle;
 static esp_lcd_panel_io_handle_t tp_io_handle = NULL;
 
+// 从参考项目 spi_lcd 提取的正确LCD初始化命令（匹配当前LCD面板硬件）
+static const st77916_lcd_init_cmd_t lcd_init_cmds[] = {
+    {0xF0, (uint8_t[]){0x28}, 1, 0},
+    {0xF2, (uint8_t[]){0x28}, 1, 0},
+    {0x73, (uint8_t[]){0xF0}, 1, 0},
+    {0x7C, (uint8_t[]){0xD1}, 1, 0},
+    {0x83, (uint8_t[]){0xE0}, 1, 0},
+    {0x84, (uint8_t[]){0x61}, 1, 0},
+    {0xF2, (uint8_t[]){0x82}, 1, 0},
+    {0xF0, (uint8_t[]){0x00}, 1, 0},
+    {0xF0, (uint8_t[]){0x01}, 1, 0},
+    {0xF1, (uint8_t[]){0x01}, 1, 0},
+    {0xB0, (uint8_t[]){0x5E}, 1, 0},
+    {0xB1, (uint8_t[]){0x55}, 1, 0},
+    {0xB2, (uint8_t[]){0x24}, 1, 0},
+    {0xB3, (uint8_t[]){0x01}, 1, 0},
+    {0xB4, (uint8_t[]){0x87}, 1, 0},
+    {0xB5, (uint8_t[]){0x44}, 1, 0},
+    {0xB6, (uint8_t[]){0x8B}, 1, 0},
+    {0xB7, (uint8_t[]){0x40}, 1, 0},
+    {0xB8, (uint8_t[]){0x86}, 1, 0},
+    {0xB9, (uint8_t[]){0x15}, 1, 0},
+    {0xBA, (uint8_t[]){0x00}, 1, 0},
+    {0xBB, (uint8_t[]){0x08}, 1, 0},
+    {0xBC, (uint8_t[]){0x08}, 1, 0},
+    {0xBD, (uint8_t[]){0x00}, 1, 0},
+    {0xBE, (uint8_t[]){0x00}, 1, 0},
+    {0xBF, (uint8_t[]){0x07}, 1, 0},
+    {0xC0, (uint8_t[]){0x80}, 1, 0},
+    {0xC1, (uint8_t[]){0x10}, 1, 0},
+    {0xC2, (uint8_t[]){0x37}, 1, 0},
+    {0xC3, (uint8_t[]){0x80}, 1, 0},
+    {0xC4, (uint8_t[]){0x10}, 1, 0},
+    {0xC5, (uint8_t[]){0x37}, 1, 0},
+    {0xC6, (uint8_t[]){0xA9}, 1, 0},
+    {0xC7, (uint8_t[]){0x41}, 1, 0},
+    {0xC8, (uint8_t[]){0x01}, 1, 0},
+    {0xC9, (uint8_t[]){0xA9}, 1, 0},
+    {0xCA, (uint8_t[]){0x41}, 1, 0},
+    {0xCB, (uint8_t[]){0x01}, 1, 0},
+    {0xCC, (uint8_t[]){0x7F}, 1, 0},
+    {0xCD, (uint8_t[]){0x7F}, 1, 0},
+    {0xCE, (uint8_t[]){0xFF}, 1, 0},
+    {0xD0, (uint8_t[]){0x91}, 1, 0},
+    {0xD1, (uint8_t[]){0x68}, 1, 0},
+    {0xD2, (uint8_t[]){0x68}, 1, 0},
+    {0xF5, (uint8_t[]){0x00, 0xA5}, 2, 0},
+    {0xDD, (uint8_t[]){0x40}, 1, 0},
+    {0xDE, (uint8_t[]){0x40}, 1, 0},
+    {0xF1, (uint8_t[]){0x10}, 1, 0},
+    {0xF0, (uint8_t[]){0x00}, 1, 0},
+    {0xF0, (uint8_t[]){0x02}, 1, 0},
+    {0xE0, (uint8_t[]){0xF0, 0x10, 0x18, 0x0D, 0x0C, 0x38, 0x3E, 0x44, 0x51, 0x39, 0x15, 0x15, 0x30, 0x34}, 14, 0},
+    {0xE1, (uint8_t[]){0xF0, 0x0F, 0x17, 0x0D, 0x0B, 0x07, 0x3E, 0x33, 0x51, 0x39, 0x15, 0x15, 0x30, 0x34}, 14, 0},
+    {0xF0, (uint8_t[]){0x10}, 1, 0},
+    {0xF3, (uint8_t[]){0x10}, 1, 0},
+    {0xE0, (uint8_t[]){0x08}, 1, 0},
+    {0xE1, (uint8_t[]){0x00}, 1, 0},
+    {0xE2, (uint8_t[]){0x00}, 1, 0},
+    {0xE3, (uint8_t[]){0x00}, 1, 0},
+    {0xE4, (uint8_t[]){0xE0}, 1, 0},
+    {0xE5, (uint8_t[]){0x06}, 1, 0},
+    {0xE6, (uint8_t[]){0x21}, 1, 0},
+    {0xE7, (uint8_t[]){0x03}, 1, 0},
+    {0xE8, (uint8_t[]){0x05}, 1, 0},
+    {0xE9, (uint8_t[]){0x02}, 1, 0},
+    {0xEA, (uint8_t[]){0xE9}, 1, 0},
+    {0xEB, (uint8_t[]){0x00}, 1, 0},
+    {0xEC, (uint8_t[]){0x00}, 1, 0},
+    {0xED, (uint8_t[]){0x14}, 1, 0},
+    {0xEE, (uint8_t[]){0xFF}, 1, 0},
+    {0xEF, (uint8_t[]){0x00}, 1, 0},
+    {0xF8, (uint8_t[]){0xFF}, 1, 0},
+    {0xF9, (uint8_t[]){0x00}, 1, 0},
+    {0xFA, (uint8_t[]){0x00}, 1, 0},
+    {0xFB, (uint8_t[]){0x30}, 1, 0},
+    {0xFC, (uint8_t[]){0x00}, 1, 0},
+    {0xFD, (uint8_t[]){0x00}, 1, 0},
+    {0xFE, (uint8_t[]){0x00}, 1, 0},
+    {0xFF, (uint8_t[]){0x00}, 1, 0},
+    {0x60, (uint8_t[]){0x40}, 1, 0},
+    {0x61, (uint8_t[]){0x05}, 1, 0},
+    {0x62, (uint8_t[]){0x00}, 1, 0},
+    {0x63, (uint8_t[]){0x42}, 1, 0},
+    {0x64, (uint8_t[]){0xDA}, 1, 0},
+    {0x65, (uint8_t[]){0x00}, 1, 0},
+    {0x66, (uint8_t[]){0x00}, 1, 0},
+    {0x67, (uint8_t[]){0x00}, 1, 0},
+    {0x68, (uint8_t[]){0x00}, 1, 0},
+    {0x69, (uint8_t[]){0x00}, 1, 0},
+    {0x6A, (uint8_t[]){0x00}, 1, 0},
+    {0x6B, (uint8_t[]){0x00}, 1, 0},
+    {0x70, (uint8_t[]){0x40}, 1, 0},
+    {0x71, (uint8_t[]){0x04}, 1, 0},
+    {0x72, (uint8_t[]){0x00}, 1, 0},
+    {0x73, (uint8_t[]){0x42}, 1, 0},
+    {0x74, (uint8_t[]){0xD9}, 1, 0},
+    {0x75, (uint8_t[]){0x00}, 1, 0},
+    {0x76, (uint8_t[]){0x00}, 1, 0},
+    {0x77, (uint8_t[]){0x00}, 1, 0},
+    {0x78, (uint8_t[]){0x00}, 1, 0},
+    {0x79, (uint8_t[]){0x00}, 1, 0},
+    {0x7A, (uint8_t[]){0x00}, 1, 0},
+    {0x7B, (uint8_t[]){0x00}, 1, 0},
+    {0x80, (uint8_t[]){0x48}, 1, 0},
+    {0x81, (uint8_t[]){0x00}, 1, 0},
+    {0x82, (uint8_t[]){0x07}, 1, 0},
+    {0x83, (uint8_t[]){0x02}, 1, 0},
+    {0x84, (uint8_t[]){0xD7}, 1, 0},
+    {0x85, (uint8_t[]){0x04}, 1, 0},
+    {0x86, (uint8_t[]){0x00}, 1, 0},
+    {0x87, (uint8_t[]){0x00}, 1, 0},
+    {0x88, (uint8_t[]){0x48}, 1, 0},
+    {0x89, (uint8_t[]){0x00}, 1, 0},
+    {0x8A, (uint8_t[]){0x09}, 1, 0},
+    {0x8B, (uint8_t[]){0x02}, 1, 0},
+    {0x8C, (uint8_t[]){0xD9}, 1, 0},
+    {0x8D, (uint8_t[]){0x04}, 1, 0},
+    {0x8E, (uint8_t[]){0x00}, 1, 0},
+    {0x8F, (uint8_t[]){0x00}, 1, 0},
+    {0x90, (uint8_t[]){0x48}, 1, 0},
+    {0x91, (uint8_t[]){0x00}, 1, 0},
+    {0x92, (uint8_t[]){0x0B}, 1, 0},
+    {0x93, (uint8_t[]){0x02}, 1, 0},
+    {0x94, (uint8_t[]){0xDB}, 1, 0},
+    {0x95, (uint8_t[]){0x04}, 1, 0},
+    {0x96, (uint8_t[]){0x00}, 1, 0},
+    {0x97, (uint8_t[]){0x00}, 1, 0},
+    {0x98, (uint8_t[]){0x48}, 1, 0},
+    {0x99, (uint8_t[]){0x00}, 1, 0},
+    {0x9A, (uint8_t[]){0x0D}, 1, 0},
+    {0x9B, (uint8_t[]){0x02}, 1, 0},
+    {0x9C, (uint8_t[]){0xDD}, 1, 0},
+    {0x9D, (uint8_t[]){0x04}, 1, 0},
+    {0x9E, (uint8_t[]){0x00}, 1, 0},
+    {0x9F, (uint8_t[]){0x00}, 1, 0},
+    {0xA0, (uint8_t[]){0x48}, 1, 0},
+    {0xA1, (uint8_t[]){0x00}, 1, 0},
+    {0xA2, (uint8_t[]){0x06}, 1, 0},
+    {0xA3, (uint8_t[]){0x02}, 1, 0},
+    {0xA4, (uint8_t[]){0xD6}, 1, 0},
+    {0xA5, (uint8_t[]){0x04}, 1, 0},
+    {0xA6, (uint8_t[]){0x00}, 1, 0},
+    {0xA7, (uint8_t[]){0x00}, 1, 0},
+    {0xA8, (uint8_t[]){0x48}, 1, 0},
+    {0xA9, (uint8_t[]){0x00}, 1, 0},
+    {0xAA, (uint8_t[]){0x08}, 1, 0},
+    {0xAB, (uint8_t[]){0x02}, 1, 0},
+    {0xAC, (uint8_t[]){0xD8}, 1, 0},
+    {0xAD, (uint8_t[]){0x04}, 1, 0},
+    {0xAE, (uint8_t[]){0x00}, 1, 0},
+    {0xAF, (uint8_t[]){0x00}, 1, 0},
+    {0xB0, (uint8_t[]){0x48}, 1, 0},
+    {0xB1, (uint8_t[]){0x00}, 1, 0},
+    {0xB2, (uint8_t[]){0x0A}, 1, 0},
+    {0xB3, (uint8_t[]){0x02}, 1, 0},
+    {0xB4, (uint8_t[]){0xDA}, 1, 0},
+    {0xB5, (uint8_t[]){0x04}, 1, 0},
+    {0xB6, (uint8_t[]){0x00}, 1, 0},
+    {0xB7, (uint8_t[]){0x00}, 1, 0},
+    {0xB8, (uint8_t[]){0x48}, 1, 0},
+    {0xB9, (uint8_t[]){0x00}, 1, 0},
+    {0xBA, (uint8_t[]){0x0C}, 1, 0},
+    {0xBB, (uint8_t[]){0x02}, 1, 0},
+    {0xBC, (uint8_t[]){0xDC}, 1, 0},
+    {0xBD, (uint8_t[]){0x04}, 1, 0},
+    {0xBE, (uint8_t[]){0x00}, 1, 0},
+    {0xBF, (uint8_t[]){0x00}, 1, 0},
+    {0xC0, (uint8_t[]){0x10}, 1, 0},
+    {0xC1, (uint8_t[]){0x47}, 1, 0},
+    {0xC2, (uint8_t[]){0x56}, 1, 0},
+    {0xC3, (uint8_t[]){0x65}, 1, 0},
+    {0xC4, (uint8_t[]){0x74}, 1, 0},
+    {0xC5, (uint8_t[]){0x88}, 1, 0},
+    {0xC6, (uint8_t[]){0x99}, 1, 0},
+    {0xC7, (uint8_t[]){0x01}, 1, 0},
+    {0xC8, (uint8_t[]){0xBB}, 1, 0},
+    {0xC9, (uint8_t[]){0xAA}, 1, 0},
+    {0xD0, (uint8_t[]){0x10}, 1, 0},
+    {0xD1, (uint8_t[]){0x47}, 1, 0},
+    {0xD2, (uint8_t[]){0x56}, 1, 0},
+    {0xD3, (uint8_t[]){0x65}, 1, 0},
+    {0xD4, (uint8_t[]){0x74}, 1, 0},
+    {0xD5, (uint8_t[]){0x88}, 1, 0},
+    {0xD6, (uint8_t[]){0x99}, 1, 0},
+    {0xD7, (uint8_t[]){0x01}, 1, 0},
+    {0xD8, (uint8_t[]){0xBB}, 1, 0},
+    {0xD9, (uint8_t[]){0xAA}, 1, 0},
+    {0xF3, (uint8_t[]){0x01}, 1, 0},
+    {0xF0, (uint8_t[]){0x00}, 1, 0},
+    {0x3A, (uint8_t[]){0x55}, 1, 0},
+    {0x21, (uint8_t[]){0x00}, 1, 0},
+    {0x11, (uint8_t[]){0x00}, 1, 120},
+    {0x29, (uint8_t[]){0x00}, 1, 0},
+};
 
 void lcd_init(){
-    const spi_bus_config_t buscfg = ST77916_PANEL_BUS_QSPI_CONFIG(PIN_LCD_CLK,
-                                                                    PIN_LCD_D0,
-                                                                    PIN_LCD_D1,
-                                                                    PIN_LCD_D2,
-                                                                    PIN_LCD_D3,
-                                                                    LCD_HIGH * 80 * sizeof(uint16_t));
-    spi_bus_initialize(SPI_LCD_HOST, &buscfg, SPI_DMA_CH_AUTO);
+    // 标准SPI总线配置（CLK + MOSI，无MISO）
+    const spi_bus_config_t buscfg = {
+        .sclk_io_num = PIN_LCD_CLK,
+        .mosi_io_num = PIN_LCD_MOSI,
+        .miso_io_num = -1,
+        .quadwp_io_num = -1,
+        .quadhd_io_num = -1,
+        .max_transfer_sz = LCD_HIGH * 80 * sizeof(uint16_t),
+    };
+    ESP_ERROR_CHECK(spi_bus_initialize(SPI_LCD_HOST, &buscfg, SPI_DMA_CH_AUTO));
 
-    // 自定义IO配置，提升SPI时钟从40MHz到80MHz
-    esp_lcd_panel_io_spi_config_t io_config = ST77916_PANEL_IO_QSPI_CONFIG(PIN_LCD_CS, NULL, NULL);
-    io_config.pclk_hz = 80 * 1000 * 1000;  // 提升到80MHz（最大值）
+    // 标准SPI IO配置（带DC引脚）
+    esp_lcd_panel_io_spi_config_t io_config = {
+        .dc_gpio_num = PIN_LCD_DC,
+        .cs_gpio_num = PIN_LCD_CS,
+        .pclk_hz = 60 * 1000 * 1000,   // C3 SPI最大60MHz
+        .lcd_cmd_bits = 8,
+        .lcd_param_bits = 8,
+        .spi_mode = 0,
+        .trans_queue_depth = 10,
+    };
     ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi((esp_lcd_spi_bus_handle_t)SPI_LCD_HOST, &io_config, &io_handle));
-    const st77916_vendor_config_t vendor_config = {
-        .flags = {
-            .use_qspi_interface = 1,
-        },
+
+    // ST77916面板配置（通过vendor_config注入正确的初始化命令）
+    st77916_vendor_config_t vendor_cfg = {
+        .init_cmds = lcd_init_cmds,
+        .init_cmds_size = sizeof(lcd_init_cmds) / sizeof(lcd_init_cmds[0]),
     };
     const esp_lcd_panel_dev_config_t panel_config = {
         .reset_gpio_num = PIN_LCD_RST,
         .rgb_ele_order = LCD_RGB_ELEMENT_ORDER_RGB,
         .bits_per_pixel = 16,
-        .vendor_config = &vendor_config,
+        .vendor_config = &vendor_cfg,
     };
     ESP_ERROR_CHECK(esp_lcd_new_panel_st77916(io_handle, &panel_config, &panel_handle));
     esp_lcd_panel_reset(panel_handle);
     esp_lcd_panel_init(panel_handle);
+    esp_lcd_panel_mirror(panel_handle, false, false);  // 与参考项目一致
 
     // 清空LCD GRAM，避免显示上次关机时的残留画面
-    // 创建黑色缓冲区填充整个屏幕
     size_t clear_buffer_size = LCD_WID * 40;  // 每次清除40行
     uint16_t *clear_buffer = heap_caps_malloc(clear_buffer_size * sizeof(uint16_t), MALLOC_CAP_DMA);
     if (clear_buffer) {
-        memset(clear_buffer, 0, clear_buffer_size * sizeof(uint16_t));  // 填充黑色(0x0000)
+        memset(clear_buffer, 0, clear_buffer_size * sizeof(uint16_t));
 
-        // 分批填充整个屏幕（避免一次性分配大内存）
         for (int y = 0; y < LCD_HIGH; y += 40) {
             int lines = (y + 40 > LCD_HIGH) ? (LCD_HIGH - y) : 40;
             esp_lcd_panel_draw_bitmap(panel_handle, 0, y, LCD_WID, y + lines, clear_buffer);
@@ -64,7 +267,8 @@ void lcd_init(){
         ESP_LOGE(LCD_TAG, "Failed to allocate clear buffer");
     }
 
-    esp_lcd_panel_disp_on_off(panel_handle, true);
+    // 初始化时不打开显示，等UI渲染完成后由main.c调用lcd_disp_on_off(true)
+    esp_lcd_panel_disp_on_off(panel_handle, false);
 }
 
 // 初始化触摸控制器
@@ -75,16 +279,26 @@ void touch_init(){
         .rst_gpio_num = PIN_TP_RST,
         .int_gpio_num = PIN_TP_INT,
         .levels = {
-            .reset = 0,// 重置电平
-            .interrupt = 0,// 中断电平
+            .reset = 0,
+            .interrupt = 0,
         },
         .flags = {
-            .swap_xy = false,// 交换XY轴
-            .mirror_x = false,// 水平镜像
-            .mirror_y = false,// 垂直镜像
+            .swap_xy = 0,       // managed版CST816S不在驱动内变换，base库会做单次变换
+            .mirror_x = 0,      // 参考项目本地驱动+base库双重变换=恒等，实际传原始坐标
+            .mirror_y = 0,      // 所以这里全部设0，直接传原始坐标给LVGL
+        },
+    };
+    // 手动配置I2C IO（不使用宏，因为宏的scl_speed_hz与legacy I2C驱动不兼容）
+    const esp_lcd_panel_io_i2c_config_t tp_io_config = {
+        .dev_addr = ESP_LCD_TOUCH_IO_I2C_CST816S_ADDRESS,
+        .control_phase_bytes = 1,
+        .dc_bit_offset = 0,
+        .lcd_cmd_bits = 8,
+        .lcd_param_bits = 0,
+        .flags = {
+            .disable_control_phase = 1,
         },
     };
-    const esp_lcd_panel_io_i2c_config_t tp_io_config = ESP_LCD_TOUCH_IO_I2C_CST816S_CONFIG();
     esp_err_t err = esp_lcd_new_panel_io_i2c((esp_lcd_i2c_bus_handle_t)I2C_MASTER_NUM, &tp_io_config, &tp_io_handle);
     if (err != ESP_OK) {
         ESP_LOGE(LCD_TAG, "Failed to create I2C IO for touch: %s", esp_err_to_name(err));
@@ -108,13 +322,13 @@ void lvgl_lcd_init(){
         .timer_period_ms = 5
     };
     lvgl_port_init(&lvgl_cfg);
-    
+
     #define LVGL_DRAW_BUF_LINES 30
     size_t buffer_size = LCD_WID * LVGL_DRAW_BUF_LINES;
 
     ESP_LOGI(LCD_TAG, "LVGL buffer size: %d bytes (W: %d, Lines: %d)",
              buffer_size * 2, LCD_WID, LVGL_DRAW_BUF_LINES);
-    
+
     const lvgl_port_display_cfg_t disp_cfg = {
         .io_handle = io_handle,
         .panel_handle = panel_handle,
@@ -122,14 +336,14 @@ void lvgl_lcd_init(){
         .double_buffer = true,
         .hres = LCD_WID,
         .vres = LCD_HIGH,
-        .monochrome = false,// 单色显示
+        .monochrome = false,
         .rotation = {
-            .swap_xy = false,// 交换XY轴
-            .mirror_x = false,// 水平镜像
-            .mirror_y = false,// 垂直镜像
+            .swap_xy = false,
+            .mirror_x = false,
+            .mirror_y = false,
         },
         .flags = {
-            .buff_dma = true,// 使用DMA传输显示缓冲区
+            .buff_dma = true,
         }
     };
     disp_handle = lvgl_port_add_disp(&disp_cfg);
@@ -144,7 +358,7 @@ void lvgl_lcd_init(){
         ESP_LOGE(LCD_TAG, "Touch handle is NULL, skipping touch initialization");
     }
 }
- 
+
 void get_touch(uint16_t* touchx,uint16_t* touchy){
     if (touch_handle == NULL) {
         ESP_LOGE(LCD_TAG, "Touch handle is NULL, cannot get touch data");
@@ -159,6 +373,13 @@ void get_touch(uint16_t* touchx,uint16_t* touchy){
     printf("%x\n",max);
 }
 
+// LCD显示开关封装（供main.c在UI渲染完成后调用）
+void lcd_disp_on_off(bool on_off) {
+    if (panel_handle != NULL) {
+        esp_lcd_panel_disp_on_off(panel_handle, on_off);
+    }
+}
+
 // 清空LCD GRAM为黑色（用于低功耗熄屏前，避免残影）
 void lcd_clear_screen_black(void) {
     if (panel_handle == NULL) {
@@ -166,12 +387,11 @@ void lcd_clear_screen_black(void) {
         return;
     }
 
-    size_t clear_buffer_size = LCD_WID * 40;  // 每次清除40行
+    size_t clear_buffer_size = LCD_WID * 40;
     uint16_t *clear_buffer = heap_caps_malloc(clear_buffer_size * sizeof(uint16_t), MALLOC_CAP_DMA);
     if (clear_buffer) {
-        memset(clear_buffer, 0, clear_buffer_size * sizeof(uint16_t));  // 填充黑色(0x0000)
+        memset(clear_buffer, 0, clear_buffer_size * sizeof(uint16_t));
 
-        // 分批填充整个屏幕
         for (int y = 0; y < LCD_HIGH; y += 40) {
             int lines = (y + 40 > LCD_HIGH) ? (LCD_HIGH - y) : 40;
             esp_lcd_panel_draw_bitmap(panel_handle, 0, y, LCD_WID, y + lines, clear_buffer);
@@ -182,4 +402,4 @@ void lcd_clear_screen_black(void) {
     } else {
         ESP_LOGE(LCD_TAG, "Failed to allocate clear buffer");
     }
-}
\ No newline at end of file
+}
diff --git a/main/main.c b/main/main.c
index aa85961..f55ba5d 100644
--- a/main/main.c
+++ b/main/main.c
@@ -1,8 +1,9 @@
 #include "driver/i2c.h"
 #include "driver/spi_master.h"
+#include "driver/gpio.h"
 #include "esp_err.h"
 #include "esp_log.h"
-#include "esp_pm.h"
+// #include "esp_pm.h"  // 暂时禁用PM
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
 #include "esp_flash.h"
@@ -118,6 +119,8 @@ esp_err_t i2c_init(void){
     i2c_config_t i2c_conf = {
         .scl_io_num = PIN_NUM_SCL,
         .sda_io_num = PIN_NUM_SDA,
+        .sda_pullup_en = GPIO_PULLUP_ENABLE,
+        .scl_pullup_en = GPIO_PULLUP_ENABLE,
         .mode = I2C_MODE_MASTER,
         .master.clk_speed = I2C_MASTER_FREQ_HZ,
     };
@@ -212,18 +215,14 @@ void app_main(void)
     nvs_init();
     ESP_LOGI("MAIN", "2. NVS已初始化");// NVS已初始化
 
-    // 配置 Power Management（低功耗管理）
-    esp_pm_config_t pm_config = {
-        .max_freq_mhz = 160,    // 最大频率 160MHz（与当前CPU频率一致）
-        .min_freq_mhz = 40,     // 最小频率 40MHz（保证LVGL正常刷新）
-        .light_sleep_enable = true  // 启用自动 Light Sleep
-    };
-    esp_err_t pm_err = esp_pm_configure(&pm_config);
-    if (pm_err == ESP_OK) {
-        ESP_LOGI("MAIN", "2.1 Power Management已启用：40-160MHz动态频率 + 自动Light Sleep");
-    } else {
-        ESP_LOGW("MAIN", "2.1 Power Management启用失败：%s", esp_err_to_name(pm_err));
-    }
+    // 暂时禁用 Power Management，避免动态调频 + Light Sleep 干扰 SPI 时序
+    // 等LCD显示和触摸功能稳定后再启用
+    // esp_pm_config_t pm_config = {
+    //     .max_freq_mhz = 160,
+    //     .min_freq_mhz = 40,
+    //     .light_sleep_enable = true
+    // };
+    // esp_pm_configure(&pm_config);
 
     lcd_init();
     ESP_LOGI("MAIN", "3. LCD已初始化");// LCD已初始化
@@ -243,19 +242,24 @@ void app_main(void)
     ESP_LOGI("MAIN", "7. SPIFFS处理完成");// SPIFFS处理完成
 
     // =====================================================================
-    // 显示SquareLine Studio生成的UI界面
+    // 显示SquareLine Studio生成的UI界面（加锁防止LVGL任务抢占渲染未完成的UI）
+    lvgl_port_lock(0);
     ui_init();    // 初始化UI（含JPEG解码）
+    lvgl_port_unlock();
     ESP_LOGI("MAIN", "8. SquareLine UI已初始化");// SquareLine UI已初始化
 
     // 等待LVGL完成屏幕切换和首帧渲染，彻底避免开机闪烁
     // ui_init()会创建所有屏幕并加载ScreenHome，包括：
     // 1. JPEG解码（约210ms）
     // 2. 屏幕对象创建和切换
-    // 3. QSPI传输首帧到LCD（约100ms）
-    // 增加到150ms确保所有渲染完成后再点亮背光
-    vTaskDelay(pdMS_TO_TICKS(150));
+    // 3. SPI传输首帧到LCD（约200ms）
+    // 增加到250ms确保所有渲染完成后再点亮背光（SPI比QSPI慢）
+    vTaskDelay(pdMS_TO_TICKS(250));
+
+    // UI渲染完成后先打开LCD显示，再点亮背光，避免开机闪烁
+    lcd_disp_on_off(true);
+    ESP_LOGI("MAIN", "8.1 LCD显示已打开");
 
-    // UI渲染完成后再点亮背光，避免开机闪烁旧画面
     pwm_init();
     ESP_LOGI("MAIN", "9. PWM背光已初始化");// PWM背光已初始化
 
diff --git a/main/pages/pages.c b/main/pages/pages.c
index fd1425e..b2d3410 100644
--- a/main/pages/pages.c
+++ b/main/pages/pages.c
@@ -69,7 +69,7 @@ void pwm_init(){
         .channel        = LEDC_CHANNEL_0,
         .timer_sel      = LEDC_TIMER_0,
         .intr_type      = LEDC_INTR_DISABLE,
-        .gpio_num       = PIN_LCD_EN,
+        .gpio_num       = PIN_LCD_BL,
         .duty           = 0,
         .hpoint         = 0
     };
@@ -269,9 +269,10 @@ void app_img_change(const char *img_name){
         // 更新图片显示
         lvgl_port_lock(0);// 锁定LVGL端口
         lv_img_set_src(app_img, &image);// 设置图片源
+        lv_img_set_zoom(app_img, 512);// 2x缩放补偿（JPEG解码使用1:2缩放节省内存）
         lv_scr_load(act_mainscreen);// 加载主屏幕
         lvgl_port_unlock();// 解锁LVGL端口
-        
+
         ESP_LOGI("IMG", "图片显示成功: %s", current_img_name);
     } else {
         ESP_LOGE("IMG", "图片解码失败，错误码: %d", ret);
@@ -336,6 +337,7 @@ void app_img_display(){
         lvgl_port_lock(0);// 锁定LVGL端口
         ESP_LOGI("IMG", "设置图片源前");
         lv_img_set_src(app_img, &image);// 设置图片源
+        lv_img_set_zoom(app_img, 512);// 2x缩放补偿（JPEG解码使用1:2缩放节省内存）
         ESP_LOGI("IMG", "设置图片源后");
         lv_obj_center(app_img);// 居中显示图片
         ESP_LOGI("IMG", "居中显示图片后");
@@ -792,6 +794,7 @@ void update_ui_ImgBle(const char *img_name) {
         // 更新ui_ImgBle控件的图片
         lvgl_port_lock(0);
         lv_img_set_src(ui_ImgBle, &ui_image);
+        lv_img_set_zoom(ui_ImgBle, 512);// 2x缩放补偿（JPEG解码使用1:2缩放节省内存）
         lvgl_port_unlock();
         
         ESP_LOGI("IMG_UI", "ui_ImgBle图片更新成功: %s", img_name);
diff --git a/managed_components/espressif__esp_lcd_st77916/.component_hash b/managed_components/espressif__esp_lcd_st77916/.component_hash
index 86319bc..bb9684d 100644
--- a/managed_components/espressif__esp_lcd_st77916/.component_hash
+++ b/managed_components/espressif__esp_lcd_st77916/.component_hash
@@ -1 +1 @@
-5fa0f8b1274576d4484e2b8d9358e2a5d09c721511bef0dce6a55b4206b5f0e9
\ No newline at end of file
+c0a565af3ea85a9d9f1e79b0e4d0829378db319bc4dab4939eca44361b3c5a1b
\ No newline at end of file
diff --git a/managed_components/espressif__esp_lcd_st77916/CHANGELOG.md b/managed_components/espressif__esp_lcd_st77916/CHANGELOG.md
index 80f90c8..1b4ebf3 100644
--- a/managed_components/espressif__esp_lcd_st77916/CHANGELOG.md
+++ b/managed_components/espressif__esp_lcd_st77916/CHANGELOG.md
@@ -1,5 +1,22 @@
 # ChangeLog
 
+## v2.0.2 - 2025-12-10
+
+### Bugfix:
+
+* Fix draw_bitmap not propagating tx_color errors, preventing system deadlock on SPI transmission failures
+
+## v2.0.1 - 2025-11-12
+
+* Updated MIPI-DSI structs for IDF6
+
+## v2.0.0 - 2025-10-29
+
+### Changes:
+
+* Compatible with ESP-IDF v6.0
+* Add MIPI-DSI interface support
+
 ## v1.0.1 - 2025-01-13
 
 ### bugfix:
diff --git a/managed_components/espressif__esp_lcd_st77916/CHECKSUMS.json b/managed_components/espressif__esp_lcd_st77916/CHECKSUMS.json
new file mode 100644
index 0000000..de4ad7b
--- /dev/null
+++ b/managed_components/espressif__esp_lcd_st77916/CHECKSUMS.json
@@ -0,0 +1 @@
+{"version":"1.0","algorithm":"sha256","created_at":"2025-11-30T02:16:23.671476+00:00","files":[{"path":"CHANGELOG.md","size":721,"hash":"3b1d8021ed3376be4b10a3a95d57633f085984ad8bd279e784830854408f232d"},{"path":"CMakeLists.txt","size":326,"hash":"df72a05add6a3b6b21f024247919d9bab829bed7b054ccf9038bb0df15f89509"},{"path":"README.md","size":8261,"hash":"ef35bd8f2fa9032b74a0efb78ca343de781e7e9dee263a530e470c86f4c1a50e"},{"path":"esp_lcd_st77916.c","size":1219,"hash":"c028dddc8857b7326133eb9d445c7f3835ef38027bec337d2cab873139533921"},{"path":"esp_lcd_st77916_mipi.c","size":18829,"hash":"b4304ec554e2370e100ac5f897a140bb249d1de0695c0b7fd67f50338b83c709"},{"path":"esp_lcd_st77916_spi.c","size":21541,"hash":"a464c88fcfd485bd418e42cfdd099cede661936ffe81ddcb0f46b3d466cc7f67"},{"path":"idf_component.yml","size":450,"hash":"5985cf795ffa8de4bf7b2df0093c8d35c64f55dd8537716138cd5f9f5b905d7f"},{"path":"license.txt","size":11358,"hash":"cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30"},{"path":"include/esp_lcd_st77916.h","size":9626,"hash":"4fb9d26532b574a14465dfe3853ea2a1bcab0fac6e28b42ed7f2e5ddd8ef2f87"},{"path":"priv_include/esp_lcd_st77916_interface.h","size":1278,"hash":"f00d59d717ad79bf78575b4685e9f426321c3a0ab9700e2ef23577e808b39251"},{"path":"test_apps/CMakeLists.txt","size":244,"hash":"964560e9e95e960d7a12c0eebb43b78d997f294fa17aa85d24a0a53dc604ed6e"},{"path":"test_apps/pytest_esp_lcd_st77916.py","size":300,"hash":"6513b1e4ab20df1aca721edef3485c23da4c0bc34920537ede6c1203ddd4f16a"},{"path":"test_apps/sdkconfig.defaults","size":257,"hash":"b3f9660085595b907f7411e205468220c2dfb867de4de5d7fb3cbb406651dcab"},{"path":"test_apps/sdkconfig.defaults.esp32p4","size":268,"hash":"1e6eb9fd686be544d3b2088a76cfe0d03127a945c8852bb9fd364e40d92ca7e3"},{"path":"test_apps/sdkconfig.defaults.esp32s3","size":232,"hash":"81eb3953a48b1bc8076d32b3b8ddb6957794f1af03e82faedfa0d919abe4407e"},{"path":"test_apps/main/CMakeLists.txt","size":114,"hash":"ef8db1c6618f6af135742f9dfe28bc3391b0f3ae280714c8110c0235f9091b20"},{"path":"test_apps/main/idf_component.yml","size":159,"hash":"fb0f2c2300bb6f5f80412b27393d83281fc13ed1a6fa8577e6b9f0f8af0d39f7"},{"path":"test_apps/main/test_app_main.c","size":1525,"hash":"29cfa83157f9e48dcf84def2e1835b35fc5dd9b47d59bc95b1ff39f5eede7a2d"},{"path":"test_apps/main/test_esp_lcd_st77916_mipi.c","size":8580,"hash":"708551cd0d8a7d9f5137c30f07908a1b743787923b958fd0f570b8dd9a2444bc"},{"path":"test_apps/main/test_esp_lcd_st77916_spi.c","size":5866,"hash":"9b3b7f597daf342fd8b574d5d85582d48e276c190d32a759291ce9ce4e83f588"}]}
\ No newline at end of file
diff --git a/managed_components/espressif__esp_lcd_st77916/CMakeLists.txt b/managed_components/espressif__esp_lcd_st77916/CMakeLists.txt
index ad1602e..2b2e102 100644
--- a/managed_components/espressif__esp_lcd_st77916/CMakeLists.txt
+++ b/managed_components/espressif__esp_lcd_st77916/CMakeLists.txt
@@ -1,4 +1,7 @@
-idf_component_register(SRCS "esp_lcd_st77916.c" INCLUDE_DIRS "include" PRIV_REQUIRES "driver" REQUIRES "esp_lcd")
+idf_component_register(SRCS "esp_lcd_st77916.c" "esp_lcd_st77916_spi.c" "esp_lcd_st77916_mipi.c"
+                       INCLUDE_DIRS "include"
+                       PRIV_INCLUDE_DIRS "priv_include"
+                       REQUIRES "esp_lcd" "driver")
 
 include(package_manager)
 cu_pkg_define_version(${CMAKE_CURRENT_LIST_DIR})
diff --git a/managed_components/espressif__esp_lcd_st77916/README.md b/managed_components/espressif__esp_lcd_st77916/README.md
index a98b2f4..c4a146a 100644
--- a/managed_components/espressif__esp_lcd_st77916/README.md
+++ b/managed_components/espressif__esp_lcd_st77916/README.md
@@ -6,7 +6,9 @@ Implementation of the ST77916 LCD controller with [esp_lcd](https://docs.espress
 
 | LCD controller | Communication interface | Component name |                               Link to datasheet                               |
 | :------------: | :---------------------: | :------------: | :---------------------------------------------------------------------------: |
-|     ST77916     |        SPI/QSPI         | esp_lcd_st77916 | [PDF](https://dl.espressif.com/AE/esp-iot-solution/ST77916_SPEC_V1.0.pdf) |
+|     ST77916     |    SPI/QSPI/MIPI-DSI    | esp_lcd_st77916 | [PDF](https://dl.espressif.com/AE/esp-iot-solution/ST77916_SPEC_V1.0.pdf) |
+
+**Note**: The MIPI-DSI interface is only supported on ESP32-P4.
 
 For more information on LCD, please refer to the [LCD documentation](https://docs.espressif.com/projects/esp-iot-solution/en/latest/display/lcd/index.html).
 
@@ -120,3 +122,53 @@ Alternatively, you can create `idf_component.yml`. More is in [Espressif's docum
     esp_lcd_panel_init(panel_handle);
     esp_lcd_panel_disp_on_off(panel_handle, true);
 ```
+
+### MIPI-DSI Interface
+
+```c
+    ESP_LOGI(TAG, "Initialize MIPI DSI bus");
+    esp_lcd_dsi_bus_handle_t mipi_dsi_bus = NULL;
+    esp_lcd_dsi_bus_config_t bus_config = ST77916_PANEL_BUS_DSI_1CH_CONFIG();
+    ESP_ERROR_CHECK(esp_lcd_new_dsi_bus(&bus_config, &mipi_dsi_bus));
+
+    ESP_LOGI(TAG, "Install MIPI DBI panel IO");
+    esp_lcd_panel_io_handle_t io_handle = NULL;
+    esp_lcd_dbi_io_config_t dbi_config = ST77916_PANEL_IO_DBI_CONFIG();
+    ESP_ERROR_CHECK(esp_lcd_new_panel_io_dbi(mipi_dsi_bus, &dbi_config, &io_handle));
+
+/**
+ * Uncomment these line if use custom initialization commands.
+ * The array should be declared as static const and positioned outside the function.
+ */
+// static const st77916_lcd_init_cmd_t lcd_init_cmds[] = {
+// //  {cmd, { data }, data_size, delay_ms}
+//     {0xF0, (uint8_t []){0x00, 0x28}, 2, 0},
+//     {0xF2, (uint8_t []){0x00, 0x28}, 2, 0},
+//     ...
+// };
+
+    ESP_LOGI(TAG, "Install ST77916 panel driver");
+    esp_lcd_panel_handle_t panel_handle = NULL;
+    esp_lcd_dpi_panel_config_t dpi_config = ST77916_360_360_PANEL_60HZ_DPI_CONFIG(LCD_COLOR_PIXEL_FORMAT_RGB565);
+    st77916_vendor_config_t vendor_config = {
+        // .init_cmds = lcd_init_cmds,      // Uncomment these line if use custom initialization commands
+        // .init_cmds_size = sizeof(lcd_init_cmds) / sizeof(st77916_lcd_init_cmd_t),
+        .flags = {
+            .use_mipi_interface = 1,
+        },
+        .mipi_config = {
+            .dsi_bus = mipi_dsi_bus,
+            .dpi_config = &dpi_config,
+        },
+    };
+    const esp_lcd_panel_dev_config_t panel_config = {
+        .reset_gpio_num = EXAMPLE_PIN_NUM_LCD_RST,      // Set to -1 if not use
+        .rgb_ele_order = LCD_RGB_ELEMENT_ORDER_RGB,
+        .bits_per_pixel = EXAMPLE_LCD_BIT_PER_PIXEL,    // 16 or 24
+        .vendor_config = &vendor_config,
+    };
+    ESP_ERROR_CHECK(esp_lcd_new_panel_st77916(io_handle, &panel_config, &panel_handle));
+    ESP_ERROR_CHECK(esp_lcd_panel_reset(panel_handle));
+    ESP_ERROR_CHECK(esp_lcd_panel_init(panel_handle));
+    ESP_ERROR_CHECK(esp_lcd_panel_disp_on_off(panel_handle, true));
+```
diff --git a/managed_components/espressif__esp_lcd_st77916/esp_lcd_st77916.c b/managed_components/espressif__esp_lcd_st77916/esp_lcd_st77916.c
index 745f22f..c8c5576 100644
--- a/managed_components/espressif__esp_lcd_st77916/esp_lcd_st77916.c
+++ b/managed_components/espressif__esp_lcd_st77916/esp_lcd_st77916.c
@@ -1,551 +1,36 @@
 /*
- * SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 
-#include <stdlib.h>
-#include <sys/cdefs.h>
-
-#include "freertos/FreeRTOS.h"
-#include "freertos/task.h"
-#include "driver/gpio.h"
+#include "soc/soc_caps.h"
 #include "esp_check.h"
-#include "esp_lcd_panel_interface.h"
-#include "esp_lcd_panel_io.h"
-#include "esp_lcd_panel_vendor.h"
-#include "esp_lcd_panel_ops.h"
-#include "esp_lcd_panel_commands.h"
-#include "esp_log.h"
+#include "esp_lcd_types.h"
 
+#include "esp_lcd_st77916_interface.h"
 #include "esp_lcd_st77916.h"
 
-#define LCD_OPCODE_WRITE_CMD        (0x02ULL)
-#define LCD_OPCODE_READ_CMD         (0x0BULL)
-#define LCD_OPCODE_WRITE_COLOR      (0x32ULL)
-
-#define ST77916_CMD_SET             (0xF0)
-#define ST77916_PARAM_SET           (0x00)
-
 static const char *TAG = "st77916";
 
-static esp_err_t panel_st77916_del(esp_lcd_panel_t *panel);
-static esp_err_t panel_st77916_reset(esp_lcd_panel_t *panel);
-static esp_err_t panel_st77916_init(esp_lcd_panel_t *panel);
-static esp_err_t panel_st77916_draw_bitmap(esp_lcd_panel_t *panel, int x_start, int y_start, int x_end, int y_end, const void *color_data);
-static esp_err_t panel_st77916_invert_color(esp_lcd_panel_t *panel, bool invert_color_data);
-static esp_err_t panel_st77916_mirror(esp_lcd_panel_t *panel, bool mirror_x, bool mirror_y);
-static esp_err_t panel_st77916_swap_xy(esp_lcd_panel_t *panel, bool swap_axes);
-static esp_err_t panel_st77916_set_gap(esp_lcd_panel_t *panel, int x_gap, int y_gap);
-static esp_err_t panel_st77916_disp_on_off(esp_lcd_panel_t *panel, bool off);
-
-typedef struct {
-    esp_lcd_panel_t base;
-    esp_lcd_panel_io_handle_t io;
-    int reset_gpio_num;
-    int x_gap;
-    int y_gap;
-    uint8_t fb_bits_per_pixel;
-    uint8_t madctl_val; // save current value of LCD_CMD_MADCTL register
-    uint8_t colmod_val; // save surrent value of LCD_CMD_COLMOD register
-    const st77916_lcd_init_cmd_t *init_cmds;
-    uint16_t init_cmds_size;
-    struct {
-        unsigned int use_qspi_interface: 1;
-        unsigned int reset_level: 1;
-    } flags;
-} st77916_panel_t;
-
-esp_err_t esp_lcd_new_panel_st77916(const esp_lcd_panel_io_handle_t io, const esp_lcd_panel_dev_config_t *panel_dev_config, esp_lcd_panel_handle_t *ret_panel)
+esp_err_t esp_lcd_new_panel_st77916(const esp_lcd_panel_io_handle_t io, const esp_lcd_panel_dev_config_t *panel_dev_config,
+                                    esp_lcd_panel_handle_t *ret_panel)
 {
-    ESP_RETURN_ON_FALSE(io && panel_dev_config && ret_panel, ESP_ERR_INVALID_ARG, TAG, "invalid argument");
+    ESP_LOGI(TAG, "version: %d.%d.%d", ESP_LCD_ST77916_VER_MAJOR, ESP_LCD_ST77916_VER_MINOR, ESP_LCD_ST77916_VER_PATCH);
+    ESP_RETURN_ON_FALSE(panel_dev_config && ret_panel, ESP_ERR_INVALID_ARG, TAG, "Invalid arguments");
 
-    esp_err_t ret = ESP_OK;
-    st77916_panel_t *st77916 = NULL;
-    st77916 = calloc(1, sizeof(st77916_panel_t));
-    ESP_GOTO_ON_FALSE(st77916, ESP_ERR_NO_MEM, err, TAG, "no mem for st77916 panel");
+    esp_err_t ret = ESP_ERR_NOT_SUPPORTED;
 
-    if (panel_dev_config->reset_gpio_num >= 0) {
-        gpio_config_t io_conf = {
-            .mode = GPIO_MODE_OUTPUT,
-            .pin_bit_mask = 1ULL << panel_dev_config->reset_gpio_num,
-        };
-        ESP_GOTO_ON_ERROR(gpio_config(&io_conf), err, TAG, "configure GPIO for RST line failed");
-    }
-
-    switch (panel_dev_config->rgb_ele_order) {
-    case LCD_RGB_ELEMENT_ORDER_RGB:
-        st77916->madctl_val = 0;
-        break;
-    case LCD_RGB_ELEMENT_ORDER_BGR:
-        st77916->madctl_val |= LCD_CMD_BGR_BIT;
-        break;
-    default:
-        ESP_GOTO_ON_FALSE(false, ESP_ERR_NOT_SUPPORTED, err, TAG, "unsupported color element order");
-        break;
-    }
-
-    switch (panel_dev_config->bits_per_pixel) {
-    case 16: // RGB565
-        st77916->colmod_val = 0x55;
-        st77916->fb_bits_per_pixel = 16;
-        break;
-    case 18: // RGB666
-        st77916->colmod_val = 0x66;
-        // each color component (R/G/B) should occupy the 6 high bits of a byte, which means 3 full bytes are required for a pixel
-        st77916->fb_bits_per_pixel = 24;
-        break;
-    default:
-        ESP_GOTO_ON_FALSE(false, ESP_ERR_NOT_SUPPORTED, err, TAG, "unsupported pixel width");
-        break;
-    }
-
-    st77916->io = io;
-    st77916->reset_gpio_num = panel_dev_config->reset_gpio_num;
-    st77916->flags.reset_level = panel_dev_config->flags.reset_active_high;
+#if SOC_MIPI_DSI_SUPPORTED
     st77916_vendor_config_t *vendor_config = (st77916_vendor_config_t *)panel_dev_config->vendor_config;
-    if (vendor_config) {
-        st77916->init_cmds = vendor_config->init_cmds;
-        st77916->init_cmds_size = vendor_config->init_cmds_size;
-        st77916->flags.use_qspi_interface = vendor_config->flags.use_qspi_interface;
+    if (vendor_config && vendor_config->flags.use_mipi_interface) {
+        ret = esp_lcd_new_panel_st77916_mipi(io, panel_dev_config, ret_panel);
+    } else
+#endif
+    {
+        // Default to SPI/QSPI interface
+        ret = esp_lcd_new_panel_st77916_spi(io, panel_dev_config, ret_panel);
     }
-    st77916->base.del = panel_st77916_del;
-    st77916->base.reset = panel_st77916_reset;
-    st77916->base.init = panel_st77916_init;
-    st77916->base.draw_bitmap = panel_st77916_draw_bitmap;
-    st77916->base.invert_color = panel_st77916_invert_color;
-    st77916->base.set_gap = panel_st77916_set_gap;
-    st77916->base.mirror = panel_st77916_mirror;
-    st77916->base.swap_xy = panel_st77916_swap_xy;
-    st77916->base.disp_on_off = panel_st77916_disp_on_off;
-    *ret_panel = &(st77916->base);
-    ESP_LOGD(TAG, "new st77916 panel @%p", st77916);
 
-    ESP_LOGI(TAG, "LCD panel create success, version: %d.%d.%d", ESP_LCD_ST77916_VER_MAJOR, ESP_LCD_ST77916_VER_MINOR,
-             ESP_LCD_ST77916_VER_PATCH);
-
-    return ESP_OK;
-
-err:
-    if (st77916) {
-        if (panel_dev_config->reset_gpio_num >= 0) {
-            gpio_reset_pin(panel_dev_config->reset_gpio_num);
-        }
-        free(st77916);
-    }
     return ret;
 }
-
-static esp_err_t tx_param(st77916_panel_t *st77916, esp_lcd_panel_io_handle_t io, int lcd_cmd, const void *param, size_t param_size)
-{
-    if (st77916->flags.use_qspi_interface) {
-        lcd_cmd &= 0xff;
-        lcd_cmd <<= 8;
-        lcd_cmd |= LCD_OPCODE_WRITE_CMD << 24;
-    }
-    return esp_lcd_panel_io_tx_param(io, lcd_cmd, param, param_size);
-}
-
-static esp_err_t tx_color(st77916_panel_t *st77916, esp_lcd_panel_io_handle_t io, int lcd_cmd, const void *param, size_t param_size)
-{
-    if (st77916->flags.use_qspi_interface) {
-        lcd_cmd &= 0xff;
-        lcd_cmd <<= 8;
-        lcd_cmd |= LCD_OPCODE_WRITE_COLOR << 24;
-    }
-    return esp_lcd_panel_io_tx_color(io, lcd_cmd, param, param_size);
-}
-
-static esp_err_t panel_st77916_del(esp_lcd_panel_t *panel)
-{
-    st77916_panel_t *st77916 = __containerof(panel, st77916_panel_t, base);
-
-    if (st77916->reset_gpio_num >= 0) {
-        gpio_reset_pin(st77916->reset_gpio_num);
-    }
-    ESP_LOGD(TAG, "del st77916 panel @%p", st77916);
-    free(st77916);
-    return ESP_OK;
-}
-
-static esp_err_t panel_st77916_reset(esp_lcd_panel_t *panel)
-{
-    st77916_panel_t *st77916 = __containerof(panel, st77916_panel_t, base);
-    esp_lcd_panel_io_handle_t io = st77916->io;
-
-    // Perform hardware reset
-    if (st77916->reset_gpio_num >= 0) {
-        gpio_set_level(st77916->reset_gpio_num, st77916->flags.reset_level);
-        vTaskDelay(pdMS_TO_TICKS(10));
-        gpio_set_level(st77916->reset_gpio_num, !st77916->flags.reset_level);
-        vTaskDelay(pdMS_TO_TICKS(120));
-    } else { // Perform software reset
-        ESP_RETURN_ON_ERROR(tx_param(st77916, io, LCD_CMD_SWRESET, NULL, 0), TAG, "send command failed");
-        vTaskDelay(pdMS_TO_TICKS(120));
-    }
-
-    return ESP_OK;
-}
-
-static const st77916_lcd_init_cmd_t vendor_specific_init_default[] = {
-    {0xF0, (uint8_t[]){0x28}, 1, 0},
-    {0xF2, (uint8_t[]){0x28}, 1, 0},
-    {0x73, (uint8_t[]){0xF0}, 1, 0},
-    {0x7C, (uint8_t[]){0xD1}, 1, 0},
-    {0x83, (uint8_t[]){0xE0}, 1, 0},
-    {0x84, (uint8_t[]){0x61}, 1, 0},
-    {0xF2, (uint8_t[]){0x82}, 1, 0},
-    {0xF0, (uint8_t[]){0x00}, 1, 0},
-    {0xF0, (uint8_t[]){0x01}, 1, 0},
-    {0xF1, (uint8_t[]){0x01}, 1, 0},
-    {0xB0, (uint8_t[]){0x5E}, 1, 0},
-    {0xB1, (uint8_t[]){0x55}, 1, 0},
-    {0xB2, (uint8_t[]){0x24}, 1, 0},
-    {0xB3, (uint8_t[]){0x01}, 1, 0},
-    {0xB4, (uint8_t[]){0x87}, 1, 0},
-    {0xB5, (uint8_t[]){0x44}, 1, 0},
-    {0xB6, (uint8_t[]){0x8B}, 1, 0},
-    {0xB7, (uint8_t[]){0x40}, 1, 0},
-    {0xB8, (uint8_t[]){0x86}, 1, 0},
-    {0xB9, (uint8_t[]){0x15}, 1, 0},
-    {0xBA, (uint8_t[]){0x00}, 1, 0},
-    {0xBB, (uint8_t[]){0x08}, 1, 0},
-    {0xBC, (uint8_t[]){0x08}, 1, 0},
-    {0xBD, (uint8_t[]){0x00}, 1, 0},
-    {0xBE, (uint8_t[]){0x00}, 1, 0},
-    {0xBF, (uint8_t[]){0x07}, 1, 0},
-    {0xC0, (uint8_t[]){0x80}, 1, 0},
-    {0xC1, (uint8_t[]){0x10}, 1, 0},
-    {0xC2, (uint8_t[]){0x37}, 1, 0},
-    {0xC3, (uint8_t[]){0x80}, 1, 0},
-    {0xC4, (uint8_t[]){0x10}, 1, 0},
-    {0xC5, (uint8_t[]){0x37}, 1, 0},
-    {0xC6, (uint8_t[]){0xA9}, 1, 0},
-    {0xC7, (uint8_t[]){0x41}, 1, 0},
-    {0xC8, (uint8_t[]){0x01}, 1, 0},
-    {0xC9, (uint8_t[]){0xA9}, 1, 0},
-    {0xCA, (uint8_t[]){0x41}, 1, 0},
-    {0xCB, (uint8_t[]){0x01}, 1, 0},
-    {0xCC, (uint8_t[]){0x7F}, 1, 0},
-    {0xCD, (uint8_t[]){0x7F}, 1, 0},
-    {0xCE, (uint8_t[]){0xFF}, 1, 0},
-    {0xD0, (uint8_t[]){0x91}, 1, 0},
-    {0xD1, (uint8_t[]){0x68}, 1, 0},
-    {0xD2, (uint8_t[]){0x68}, 1, 0},
-    {0xF5, (uint8_t[]){0x00, 0xA5}, 2, 0},
-    {0xDD, (uint8_t[]){0x40}, 1, 0},
-    {0xDE, (uint8_t[]){0x40}, 1, 0},
-    {0xF1, (uint8_t[]){0x10}, 1, 0},
-    {0xF0, (uint8_t[]){0x00}, 1, 0},
-    {0xF0, (uint8_t[]){0x02}, 1, 0},
-    {0xE0, (uint8_t[]){0xF0, 0x10, 0x18, 0x0D, 0x0C, 0x38, 0x3E, 0x44, 0x51, 0x39, 0x15, 0x15, 0x30, 0x34}, 14, 0},
-    {0xE1, (uint8_t[]){0xF0, 0x0F, 0x17, 0x0D, 0x0B, 0x07, 0x3E, 0x33, 0x51, 0x39, 0x15, 0x15, 0x30, 0x34}, 14, 0},
-    {0xF0, (uint8_t[]){0x10}, 1, 0},
-    {0xF3, (uint8_t[]){0x10}, 1, 0},
-    {0xE0, (uint8_t[]){0x08}, 1, 0},
-    {0xE1, (uint8_t[]){0x00}, 1, 0},
-    {0xE2, (uint8_t[]){0x00}, 1, 0},
-    {0xE3, (uint8_t[]){0x00}, 1, 0},
-    {0xE4, (uint8_t[]){0xE0}, 1, 0},
-    {0xE5, (uint8_t[]){0x06}, 1, 0},
-    {0xE6, (uint8_t[]){0x21}, 1, 0},
-    {0xE7, (uint8_t[]){0x03}, 1, 0},
-    {0xE8, (uint8_t[]){0x05}, 1, 0},
-    {0xE9, (uint8_t[]){0x02}, 1, 0},
-    {0xEA, (uint8_t[]){0xE9}, 1, 0},
-    {0xEB, (uint8_t[]){0x00}, 1, 0},
-    {0xEC, (uint8_t[]){0x00}, 1, 0},
-    {0xED, (uint8_t[]){0x14}, 1, 0},
-    {0xEE, (uint8_t[]){0xFF}, 1, 0},
-    {0xEF, (uint8_t[]){0x00}, 1, 0},
-    {0xF8, (uint8_t[]){0xFF}, 1, 0},
-    {0xF9, (uint8_t[]){0x00}, 1, 0},
-    {0xFA, (uint8_t[]){0x00}, 1, 0},
-    {0xFB, (uint8_t[]){0x30}, 1, 0},
-    {0xFC, (uint8_t[]){0x00}, 1, 0},
-    {0xFD, (uint8_t[]){0x00}, 1, 0},
-    {0xFE, (uint8_t[]){0x00}, 1, 0},
-    {0xFF, (uint8_t[]){0x00}, 1, 0},
-    {0x60, (uint8_t[]){0x40}, 1, 0},
-    {0x61, (uint8_t[]){0x05}, 1, 0},
-    {0x62, (uint8_t[]){0x00}, 1, 0},
-    {0x63, (uint8_t[]){0x42}, 1, 0},
-    {0x64, (uint8_t[]){0xDA}, 1, 0},
-    {0x65, (uint8_t[]){0x00}, 1, 0},
-    {0x66, (uint8_t[]){0x00}, 1, 0},
-    {0x67, (uint8_t[]){0x00}, 1, 0},
-    {0x68, (uint8_t[]){0x00}, 1, 0},
-    {0x69, (uint8_t[]){0x00}, 1, 0},
-    {0x6A, (uint8_t[]){0x00}, 1, 0},
-    {0x6B, (uint8_t[]){0x00}, 1, 0},
-    {0x70, (uint8_t[]){0x40}, 1, 0},
-    {0x71, (uint8_t[]){0x04}, 1, 0},
-    {0x72, (uint8_t[]){0x00}, 1, 0},
-    {0x73, (uint8_t[]){0x42}, 1, 0},
-    {0x74, (uint8_t[]){0xD9}, 1, 0},
-    {0x75, (uint8_t[]){0x00}, 1, 0},
-    {0x76, (uint8_t[]){0x00}, 1, 0},
-    {0x77, (uint8_t[]){0x00}, 1, 0},
-    {0x78, (uint8_t[]){0x00}, 1, 0},
-    {0x79, (uint8_t[]){0x00}, 1, 0},
-    {0x7A, (uint8_t[]){0x00}, 1, 0},
-    {0x7B, (uint8_t[]){0x00}, 1, 0},
-    {0x80, (uint8_t[]){0x48}, 1, 0},
-    {0x81, (uint8_t[]){0x00}, 1, 0},
-    {0x82, (uint8_t[]){0x07}, 1, 0},
-    {0x83, (uint8_t[]){0x02}, 1, 0},
-    {0x84, (uint8_t[]){0xD7}, 1, 0},
-    {0x85, (uint8_t[]){0x04}, 1, 0},
-    {0x86, (uint8_t[]){0x00}, 1, 0},
-    {0x87, (uint8_t[]){0x00}, 1, 0},
-    {0x88, (uint8_t[]){0x48}, 1, 0},
-    {0x89, (uint8_t[]){0x00}, 1, 0},
-    {0x8A, (uint8_t[]){0x09}, 1, 0},
-    {0x8B, (uint8_t[]){0x02}, 1, 0},
-    {0x8C, (uint8_t[]){0xD9}, 1, 0},
-    {0x8D, (uint8_t[]){0x04}, 1, 0},
-    {0x8E, (uint8_t[]){0x00}, 1, 0},
-    {0x8F, (uint8_t[]){0x00}, 1, 0},
-    {0x90, (uint8_t[]){0x48}, 1, 0},
-    {0x91, (uint8_t[]){0x00}, 1, 0},
-    {0x92, (uint8_t[]){0x0B}, 1, 0},
-    {0x93, (uint8_t[]){0x02}, 1, 0},
-    {0x94, (uint8_t[]){0xDB}, 1, 0},
-    {0x95, (uint8_t[]){0x04}, 1, 0},
-    {0x96, (uint8_t[]){0x00}, 1, 0},
-    {0x97, (uint8_t[]){0x00}, 1, 0},
-    {0x98, (uint8_t[]){0x48}, 1, 0},
-    {0x99, (uint8_t[]){0x00}, 1, 0},
-    {0x9A, (uint8_t[]){0x0D}, 1, 0},
-    {0x9B, (uint8_t[]){0x02}, 1, 0},
-    {0x9C, (uint8_t[]){0xDD}, 1, 0},
-    {0x9D, (uint8_t[]){0x04}, 1, 0},
-    {0x9E, (uint8_t[]){0x00}, 1, 0},
-    {0x9F, (uint8_t[]){0x00}, 1, 0},
-    {0xA0, (uint8_t[]){0x48}, 1, 0},
-    {0xA1, (uint8_t[]){0x00}, 1, 0},
-    {0xA2, (uint8_t[]){0x06}, 1, 0},
-    {0xA3, (uint8_t[]){0x02}, 1, 0},
-    {0xA4, (uint8_t[]){0xD6}, 1, 0},
-    {0xA5, (uint8_t[]){0x04}, 1, 0},
-    {0xA6, (uint8_t[]){0x00}, 1, 0},
-    {0xA7, (uint8_t[]){0x00}, 1, 0},
-    {0xA8, (uint8_t[]){0x48}, 1, 0},
-    {0xA9, (uint8_t[]){0x00}, 1, 0},
-    {0xAA, (uint8_t[]){0x08}, 1, 0},
-    {0xAB, (uint8_t[]){0x02}, 1, 0},
-    {0xAC, (uint8_t[]){0xD8}, 1, 0},
-    {0xAD, (uint8_t[]){0x04}, 1, 0},
-    {0xAE, (uint8_t[]){0x00}, 1, 0},
-    {0xAF, (uint8_t[]){0x00}, 1, 0},
-    {0xB0, (uint8_t[]){0x48}, 1, 0},
-    {0xB1, (uint8_t[]){0x00}, 1, 0},
-    {0xB2, (uint8_t[]){0x0A}, 1, 0},
-    {0xB3, (uint8_t[]){0x02}, 1, 0},
-    {0xB4, (uint8_t[]){0xDA}, 1, 0},
-    {0xB5, (uint8_t[]){0x04}, 1, 0},
-    {0xB6, (uint8_t[]){0x00}, 1, 0},
-    {0xB7, (uint8_t[]){0x00}, 1, 0},
-    {0xB8, (uint8_t[]){0x48}, 1, 0},
-    {0xB9, (uint8_t[]){0x00}, 1, 0},
-    {0xBA, (uint8_t[]){0x0C}, 1, 0},
-    {0xBB, (uint8_t[]){0x02}, 1, 0},
-    {0xBC, (uint8_t[]){0xDC}, 1, 0},
-    {0xBD, (uint8_t[]){0x04}, 1, 0},
-    {0xBE, (uint8_t[]){0x00}, 1, 0},
-    {0xBF, (uint8_t[]){0x00}, 1, 0},
-    {0xC0, (uint8_t[]){0x10}, 1, 0},
-    {0xC1, (uint8_t[]){0x47}, 1, 0},
-    {0xC2, (uint8_t[]){0x56}, 1, 0},
-    {0xC3, (uint8_t[]){0x65}, 1, 0},
-    {0xC4, (uint8_t[]){0x74}, 1, 0},
-    {0xC5, (uint8_t[]){0x88}, 1, 0},
-    {0xC6, (uint8_t[]){0x99}, 1, 0},
-    {0xC7, (uint8_t[]){0x01}, 1, 0},
-    {0xC8, (uint8_t[]){0xBB}, 1, 0},
-    {0xC9, (uint8_t[]){0xAA}, 1, 0},
-    {0xD0, (uint8_t[]){0x10}, 1, 0},
-    {0xD1, (uint8_t[]){0x47}, 1, 0},
-    {0xD2, (uint8_t[]){0x56}, 1, 0},
-    {0xD3, (uint8_t[]){0x65}, 1, 0},
-    {0xD4, (uint8_t[]){0x74}, 1, 0},
-    {0xD5, (uint8_t[]){0x88}, 1, 0},
-    {0xD6, (uint8_t[]){0x99}, 1, 0},
-    {0xD7, (uint8_t[]){0x01}, 1, 0},
-    {0xD8, (uint8_t[]){0xBB}, 1, 0},
-    {0xD9, (uint8_t[]){0xAA}, 1, 0},
-    {0xF3, (uint8_t[]){0x01}, 1, 0},
-    {0xF0, (uint8_t[]){0x00}, 1, 0},
-    {0x3A, (uint8_t[]){0x55}, 1, 0},
-    {0x21, (uint8_t[]){0x00}, 1, 0},
-    {0x11, (uint8_t[]){0x00}, 1, 120},
-    {0x29, (uint8_t[]){0x00}, 1, 0}
-};
-
-static esp_err_t panel_st77916_init(esp_lcd_panel_t *panel)
-{
-    st77916_panel_t *st77916 = __containerof(panel, st77916_panel_t, base);
-    esp_lcd_panel_io_handle_t io = st77916->io;
-    const st77916_lcd_init_cmd_t *init_cmds = NULL;
-    uint16_t init_cmds_size = 0;
-    bool is_user_set = true;
-    bool is_cmd_overwritten = false;
-
-    ESP_RETURN_ON_ERROR(tx_param(st77916, io, LCD_CMD_MADCTL, (uint8_t[]) {
-        st77916->madctl_val,
-    }, 1), TAG, "send command failed");
-    ESP_RETURN_ON_ERROR(tx_param(st77916, io, LCD_CMD_COLMOD, (uint8_t[]) {
-        st77916->colmod_val,
-    }, 1), TAG, "send command failed");
-
-    // vendor specific initialization, it can be different between manufacturers
-    // should consult the LCD supplier for initialization sequence code
-    if (st77916->init_cmds) {
-        init_cmds = st77916->init_cmds;
-        init_cmds_size = st77916->init_cmds_size;
-    } else {
-        init_cmds = vendor_specific_init_default;
-        init_cmds_size = sizeof(vendor_specific_init_default) / sizeof(st77916_lcd_init_cmd_t);
-    }
-
-    for (int i = 0; i < init_cmds_size; i++) {
-        // Check if the command has been used or conflicts with the internal
-        if (is_user_set && (init_cmds[i].data_bytes > 0)) {
-            switch (init_cmds[i].cmd) {
-            case LCD_CMD_MADCTL:
-                is_cmd_overwritten = true;
-                st77916->madctl_val = ((uint8_t *)init_cmds[i].data)[0];
-                break;
-            case LCD_CMD_COLMOD:
-                is_cmd_overwritten = true;
-                st77916->colmod_val = ((uint8_t *)init_cmds[i].data)[0];
-                break;
-            default:
-                is_cmd_overwritten = false;
-                break;
-            }
-
-            if (is_cmd_overwritten) {
-                is_cmd_overwritten = false;
-                ESP_LOGW(TAG, "The %02Xh command has been used and will be overwritten by external initialization sequence", init_cmds[i].cmd);
-            }
-        }
-
-        // Send command
-        ESP_RETURN_ON_ERROR(tx_param(st77916, io, init_cmds[i].cmd, init_cmds[i].data, init_cmds[i].data_bytes), TAG, "send command failed");
-        vTaskDelay(pdMS_TO_TICKS(init_cmds[i].delay_ms));
-
-        // Check if the current cmd is the "command set" cmd
-        if ((init_cmds[i].cmd == ST77916_CMD_SET)) {
-            is_user_set = ((uint8_t *)init_cmds[i].data)[0] == ST77916_PARAM_SET ? true : false;
-        }
-    }
-    ESP_LOGD(TAG, "send init commands success");
-
-    return ESP_OK;
-}
-
-static esp_err_t panel_st77916_draw_bitmap(esp_lcd_panel_t *panel, int x_start, int y_start, int x_end, int y_end, const void *color_data)
-{
-    st77916_panel_t *st77916 = __containerof(panel, st77916_panel_t, base);
-    assert((x_start < x_end) && (y_start < y_end) && "start position must be smaller than end position");
-    esp_lcd_panel_io_handle_t io = st77916->io;
-
-    x_start += st77916->x_gap;
-    x_end += st77916->x_gap;
-    y_start += st77916->y_gap;
-    y_end += st77916->y_gap;
-
-    // define an area of frame memory where MCU can access
-    ESP_RETURN_ON_ERROR(tx_param(st77916, io, LCD_CMD_CASET, (uint8_t[]) {
-        (x_start >> 8) & 0xFF,
-        x_start & 0xFF,
-        ((x_end - 1) >> 8) & 0xFF,
-        (x_end - 1) & 0xFF,
-    }, 4), TAG, "send command failed");
-    ESP_RETURN_ON_ERROR(tx_param(st77916, io, LCD_CMD_RASET, (uint8_t[]) {
-        (y_start >> 8) & 0xFF,
-        y_start & 0xFF,
-        ((y_end - 1) >> 8) & 0xFF,
-        (y_end - 1) & 0xFF,
-    }, 4), TAG, "send command failed");
-    // transfer frame buffer
-    size_t len = (x_end - x_start) * (y_end - y_start) * st77916->fb_bits_per_pixel / 8;
-    tx_color(st77916, io, LCD_CMD_RAMWR, color_data, len);
-
-    return ESP_OK;
-}
-
-static esp_err_t panel_st77916_invert_color(esp_lcd_panel_t *panel, bool invert_color_data)
-{
-    st77916_panel_t *st77916 = __containerof(panel, st77916_panel_t, base);
-    esp_lcd_panel_io_handle_t io = st77916->io;
-    int command = 0;
-    if (invert_color_data) {
-        command = LCD_CMD_INVON;
-    } else {
-        command = LCD_CMD_INVOFF;
-    }
-    ESP_RETURN_ON_ERROR(tx_param(st77916, io, command, NULL, 0), TAG, "send command failed");
-    return ESP_OK;
-}
-
-static esp_err_t panel_st77916_mirror(esp_lcd_panel_t *panel, bool mirror_x, bool mirror_y)
-{
-    st77916_panel_t *st77916 = __containerof(panel, st77916_panel_t, base);
-    esp_lcd_panel_io_handle_t io = st77916->io;
-    esp_err_t ret = ESP_OK;
-
-    if (mirror_x) {
-        st77916->madctl_val |= BIT(6);
-    } else {
-        st77916->madctl_val &= ~BIT(6);
-    }
-    if (mirror_y) {
-        st77916->madctl_val |= BIT(7);
-    } else {
-        st77916->madctl_val &= ~BIT(7);
-    }
-    ESP_RETURN_ON_ERROR(tx_param(st77916, io, LCD_CMD_MADCTL, (uint8_t[]) {
-        st77916->madctl_val
-    }, 1), TAG, "send command failed");
-    return ret;
-}
-
-static esp_err_t panel_st77916_swap_xy(esp_lcd_panel_t *panel, bool swap_axes)
-{
-    st77916_panel_t *st77916 = __containerof(panel, st77916_panel_t, base);
-    esp_lcd_panel_io_handle_t io = st77916->io;
-    if (swap_axes) {
-        st77916->madctl_val |= LCD_CMD_MV_BIT;
-    } else {
-        st77916->madctl_val &= ~LCD_CMD_MV_BIT;
-    }
-    ESP_RETURN_ON_ERROR(tx_param(st77916, io, LCD_CMD_MADCTL, (uint8_t[]) {
-        st77916->madctl_val
-    }, 1), TAG, "send command failed");
-    return ESP_OK;
-}
-
-static esp_err_t panel_st77916_set_gap(esp_lcd_panel_t *panel, int x_gap, int y_gap)
-{
-    st77916_panel_t *st77916 = __containerof(panel, st77916_panel_t, base);
-    st77916->x_gap = x_gap;
-    st77916->y_gap = y_gap;
-    return ESP_OK;
-}
-
-static esp_err_t panel_st77916_disp_on_off(esp_lcd_panel_t *panel, bool on_off)
-{
-    st77916_panel_t *st77916 = __containerof(panel, st77916_panel_t, base);
-    esp_lcd_panel_io_handle_t io = st77916->io;
-    int command = 0;
-
-    if (on_off) {
-        command = LCD_CMD_DISPON;
-    } else {
-        command = LCD_CMD_DISPOFF;
-    }
-    ESP_RETURN_ON_ERROR(tx_param(st77916, io, command, NULL, 0), TAG, "send command failed");
-    return ESP_OK;
-}
diff --git a/managed_components/espressif__esp_lcd_st77916/esp_lcd_st77916_mipi.c b/managed_components/espressif__esp_lcd_st77916/esp_lcd_st77916_mipi.c
new file mode 100644
index 0000000..290710d
--- /dev/null
+++ b/managed_components/espressif__esp_lcd_st77916/esp_lcd_st77916_mipi.c
@@ -0,0 +1,489 @@
+/*
+ * SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include "soc/soc_caps.h"
+
+#if SOC_MIPI_DSI_SUPPORTED
+#include "esp_check.h"
+#include "esp_log.h"
+#include "esp_lcd_panel_commands.h"
+#include "esp_lcd_panel_interface.h"
+#include "esp_lcd_panel_io.h"
+#include "esp_lcd_mipi_dsi.h"
+#include "esp_lcd_panel_vendor.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "driver/gpio.h"
+#include "esp_lcd_st77916.h"
+#include "esp_lcd_st77916_interface.h"
+
+typedef struct {
+    esp_lcd_panel_io_handle_t io;
+    int reset_gpio_num;
+    uint8_t madctl_val; // save current value of LCD_CMD_MADCTL register
+    uint8_t colmod_val; // save surrent value of LCD_CMD_COLMOD register
+    const st77916_lcd_init_cmd_t *init_cmds;
+    uint16_t init_cmds_size;
+    struct {
+        unsigned int reset_level: 1;
+    } flags;
+    // To save the original functions of MIPI DPI panel
+    esp_err_t (*del)(esp_lcd_panel_t *panel);
+    esp_err_t (*init)(esp_lcd_panel_t *panel);
+} st77916_mipi_panel_t;
+
+static const char *TAG = "st77916_mipi";
+
+static esp_err_t panel_st77916_mipi_del(esp_lcd_panel_t *panel);
+static esp_err_t panel_st77916_mipi_init(esp_lcd_panel_t *panel);
+static esp_err_t panel_st77916_mipi_reset(esp_lcd_panel_t *panel);
+static esp_err_t panel_st77916_mipi_invert_color(esp_lcd_panel_t *panel, bool invert_color_data);
+static esp_err_t panel_st77916_mipi_mirror(esp_lcd_panel_t *panel, bool mirror_x, bool mirror_y);
+static esp_err_t panel_st77916_mipi_disp_on_off(esp_lcd_panel_t *panel, bool on_off);
+
+esp_err_t esp_lcd_new_panel_st77916_mipi(const esp_lcd_panel_io_handle_t io, const esp_lcd_panel_dev_config_t *panel_dev_config,
+                                         esp_lcd_panel_handle_t *ret_panel)
+{
+    ESP_RETURN_ON_FALSE(io && panel_dev_config && ret_panel, ESP_ERR_INVALID_ARG, TAG, "invalid arguments");
+    st77916_vendor_config_t *vendor_config = (st77916_vendor_config_t *)panel_dev_config->vendor_config;
+    ESP_RETURN_ON_FALSE(vendor_config && vendor_config->mipi_config.dpi_config && vendor_config->mipi_config.dsi_bus, ESP_ERR_INVALID_ARG, TAG,
+                        "invalid vendor config");
+
+    esp_err_t ret = ESP_OK;
+    st77916_mipi_panel_t *st77916_mipi = (st77916_mipi_panel_t *)calloc(1, sizeof(st77916_mipi_panel_t));
+    ESP_RETURN_ON_FALSE(st77916_mipi, ESP_ERR_NO_MEM, TAG, "no mem for st77916_mipi panel");
+
+    if (panel_dev_config->reset_gpio_num >= 0) {
+        gpio_config_t io_conf = {
+            .mode = GPIO_MODE_OUTPUT,
+            .pin_bit_mask = 1ULL << panel_dev_config->reset_gpio_num,
+        };
+        ESP_GOTO_ON_ERROR(gpio_config(&io_conf), err, TAG, "configure GPIO for RST line failed");
+    }
+
+    switch (panel_dev_config->rgb_ele_order) {
+    case LCD_RGB_ELEMENT_ORDER_RGB:
+        st77916_mipi->madctl_val = 0;
+        break;
+    case LCD_RGB_ELEMENT_ORDER_BGR:
+        st77916_mipi->madctl_val |= LCD_CMD_BGR_BIT;
+        break;
+    default:
+        ESP_GOTO_ON_FALSE(false, ESP_ERR_NOT_SUPPORTED, err, TAG, "unsupported color space");
+        break;
+    }
+
+    st77916_mipi->io = io;
+    st77916_mipi->init_cmds = vendor_config->init_cmds;
+    st77916_mipi->init_cmds_size = vendor_config->init_cmds_size;
+    st77916_mipi->reset_gpio_num = panel_dev_config->reset_gpio_num;
+    st77916_mipi->flags.reset_level = panel_dev_config->flags.reset_active_high;
+
+    // Create MIPI DPI panel
+    esp_lcd_panel_handle_t panel_handle = NULL;
+    ESP_GOTO_ON_ERROR(esp_lcd_new_panel_dpi(vendor_config->mipi_config.dsi_bus, vendor_config->mipi_config.dpi_config, &panel_handle), err, TAG,
+                      "create MIPI DPI panel failed");
+    ESP_LOGD(TAG, "new MIPI DPI panel @%p", panel_handle);
+
+    // Save the original functions of MIPI DPI panel
+    st77916_mipi->del = panel_handle->del;
+    st77916_mipi->init = panel_handle->init;
+    // Overwrite the functions of MIPI DPI panel
+    panel_handle->del = panel_st77916_mipi_del;
+    panel_handle->init = panel_st77916_mipi_init;
+    panel_handle->reset = panel_st77916_mipi_reset;
+    panel_handle->mirror = panel_st77916_mipi_mirror;
+    panel_handle->invert_color = panel_st77916_mipi_invert_color;
+    panel_handle->disp_on_off = panel_st77916_mipi_disp_on_off;
+    panel_handle->user_data = st77916_mipi;
+    *ret_panel = panel_handle;
+    ESP_LOGD(TAG, "new st77916_mipi panel @%p", st77916_mipi);
+
+    return ESP_OK;
+
+err:
+    if (st77916_mipi) {
+        if (panel_dev_config->reset_gpio_num >= 0) {
+            gpio_reset_pin(panel_dev_config->reset_gpio_num);
+        }
+        free(st77916_mipi);
+    }
+    return ret;
+}
+
+static const st77916_lcd_init_cmd_t vendor_specific_init_default[] = {
+    //  {cmd, { data }, data_size, delay_ms}
+    // ===== Page control / config =====
+    {0xF0, (uint8_t[]){0x00, 0x28}, 2, 0},
+    {0xF2, (uint8_t[]){0x00, 0x28}, 2, 0},
+    {0x73, (uint8_t[]){0x00, 0xF0}, 2, 0},
+    {0x7C, (uint8_t[]){0x00, 0xD1}, 2, 0},
+    {0x83, (uint8_t[]){0x00, 0xE0}, 2, 0},
+    {0x84, (uint8_t[]){0x00, 0x61}, 2, 0},
+    {0xF2, (uint8_t[]){0x00, 0x82}, 2, 0},
+    {0xF0, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xF0, (uint8_t[]){0x00, 0x01}, 2, 0},
+    {0xF1, (uint8_t[]){0x00, 0x01}, 2, 0},
+
+    // ===== Register settings (single-param → +0x00) =====
+    {0xB0, (uint8_t[]){0x00, 0x56}, 2, 0},
+    {0xB1, (uint8_t[]){0x00, 0x4D}, 2, 0},
+    {0xB2, (uint8_t[]){0x00, 0x24}, 2, 0},
+    {0xB4, (uint8_t[]){0x00, 0x87}, 2, 0},
+    {0xB5, (uint8_t[]){0x00, 0x44}, 2, 0},
+    {0xB6, (uint8_t[]){0x00, 0x8B}, 2, 0},
+    {0xB7, (uint8_t[]){0x00, 0x40}, 2, 0},
+    {0xB8, (uint8_t[]){0x00, 0x86}, 2, 0},
+    {0xBA, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xBB, (uint8_t[]){0x00, 0x08}, 2, 0},
+    {0xBC, (uint8_t[]){0x00, 0x08}, 2, 0},
+    {0xBD, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xC0, (uint8_t[]){0x00, 0x80}, 2, 0},
+    {0xC1, (uint8_t[]){0x00, 0x10}, 2, 0},
+    {0xC2, (uint8_t[]){0x00, 0x37}, 2, 0},
+    {0xC3, (uint8_t[]){0x00, 0x80}, 2, 0},
+    {0xC4, (uint8_t[]){0x00, 0x10}, 2, 0},
+    {0xC5, (uint8_t[]){0x00, 0x37}, 2, 0},
+    {0xC6, (uint8_t[]){0x00, 0xA9}, 2, 0},
+    {0xC7, (uint8_t[]){0x00, 0x41}, 2, 0},
+    {0xC8, (uint8_t[]){0x00, 0x01}, 2, 0},
+    {0xC9, (uint8_t[]){0x00, 0xA9}, 2, 0},
+    {0xCA, (uint8_t[]){0x00, 0x41}, 2, 0},
+    {0xCB, (uint8_t[]){0x00, 0x01}, 2, 0},
+    {0xD0, (uint8_t[]){0x00, 0x91}, 2, 0},
+    {0xD1, (uint8_t[]){0x00, 0x68}, 2, 0},
+    {0xD2, (uint8_t[]){0x00, 0x68}, 2, 0},
+
+    // ===== Special case: F5 (only add dummy before first arg) =====
+    {0xF5, (uint8_t[]){0x00, 0x00, 0xA5}, 3, 0},
+
+    {0xDD, (uint8_t[]){0x00, 0x4F}, 2, 0},
+    {0xDE, (uint8_t[]){0x00, 0x4F}, 2, 0},
+    {0xF1, (uint8_t[]){0x00, 0x10}, 2, 0},
+    {0xF0, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xF0, (uint8_t[]){0x00, 0x02}, 2, 0},
+
+    // ===== Gamma (multi-param → prepend 0x00) =====
+    {0xE0, (uint8_t[]){0x00, 0xF0, 0x0A, 0x10, 0x09, 0x09, 0x36, 0x35, 0x33, 0x4A, 0x29, 0x15, 0x15, 0x2E, 0x34}, 15, 0},
+    {0xE1, (uint8_t[]){0x00, 0xF0, 0x0A, 0x0F, 0x08, 0x08, 0x05, 0x34, 0x33, 0x4A, 0x39, 0x15, 0x15, 0x2D, 0x33}, 15, 0},
+
+    {0xF0, (uint8_t[]){0x00, 0x10}, 2, 0},
+    {0xF3, (uint8_t[]){0x00, 0x10}, 2, 0},
+
+    // ===== More registers =====
+    {0xE0, (uint8_t[]){0x00, 0x07}, 2, 0},
+    {0xE1, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xE2, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xE3, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xE4, (uint8_t[]){0x00, 0xE0}, 2, 0},
+    {0xE5, (uint8_t[]){0x00, 0x06}, 2, 0},
+    {0xE6, (uint8_t[]){0x00, 0x21}, 2, 0},
+    {0xE7, (uint8_t[]){0x00, 0x01}, 2, 0},
+    {0xE8, (uint8_t[]){0x00, 0x05}, 2, 0},
+    {0xE9, (uint8_t[]){0x00, 0x02}, 2, 0},
+    {0xEA, (uint8_t[]){0x00, 0xDA}, 2, 0},
+    {0xEB, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xEC, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xED, (uint8_t[]){0x00, 0x0F}, 2, 0},
+    {0xEE, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xEF, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xF8, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xF9, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xFA, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xFB, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xFC, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xFD, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xFE, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xFF, (uint8_t[]){0x00, 0x00}, 2, 0},
+
+    {0x60, (uint8_t[]){0x00, 0x40}, 2, 0},
+    {0x61, (uint8_t[]){0x00, 0x04}, 2, 0},
+    {0x62, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x63, (uint8_t[]){0x00, 0x42}, 2, 0},
+    {0x64, (uint8_t[]){0x00, 0xD9}, 2, 0},
+    {0x65, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x66, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x67, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x68, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x69, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x6A, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x6B, (uint8_t[]){0x00, 0x00}, 2, 0},
+
+    {0x70, (uint8_t[]){0x00, 0x40}, 2, 0},
+    {0x71, (uint8_t[]){0x00, 0x03}, 2, 0},
+    {0x72, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x73, (uint8_t[]){0x00, 0x42}, 2, 0},
+    {0x74, (uint8_t[]){0x00, 0xD8}, 2, 0},
+    {0x75, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x76, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x77, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x78, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x79, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x7A, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x7B, (uint8_t[]){0x00, 0x00}, 2, 0},
+
+    {0x80, (uint8_t[]){0x00, 0x48}, 2, 0},
+    {0x81, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x82, (uint8_t[]){0x00, 0x06}, 2, 0},
+    {0x83, (uint8_t[]){0x00, 0x02}, 2, 0},
+    {0x84, (uint8_t[]){0x00, 0xD6}, 2, 0},
+    {0x85, (uint8_t[]){0x00, 0x04}, 2, 0},
+    {0x86, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x87, (uint8_t[]){0x00, 0x00}, 2, 0},
+
+    {0x88, (uint8_t[]){0x00, 0x48}, 2, 0},
+    {0x89, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x8A, (uint8_t[]){0x00, 0x08}, 2, 0},
+    {0x8B, (uint8_t[]){0x00, 0x02}, 2, 0},
+    {0x8C, (uint8_t[]){0x00, 0xD8}, 2, 0},
+    {0x8D, (uint8_t[]){0x00, 0x04}, 2, 0},
+    {0x8E, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x8F, (uint8_t[]){0x00, 0x00}, 2, 0},
+
+    {0x90, (uint8_t[]){0x00, 0x48}, 2, 0},
+    {0x91, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x92, (uint8_t[]){0x00, 0x0A}, 2, 0},
+    {0x93, (uint8_t[]){0x00, 0x02}, 2, 0},
+    {0x94, (uint8_t[]){0x00, 0xDA}, 2, 0},
+    {0x95, (uint8_t[]){0x00, 0x04}, 2, 0},
+    {0x96, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x97, (uint8_t[]){0x00, 0x00}, 2, 0},
+
+    {0x98, (uint8_t[]){0x00, 0x48}, 2, 0},
+    {0x99, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x9A, (uint8_t[]){0x00, 0x0C}, 2, 0},
+    {0x9B, (uint8_t[]){0x00, 0x02}, 2, 0},
+    {0x9C, (uint8_t[]){0x00, 0xDC}, 2, 0},
+    {0x9D, (uint8_t[]){0x00, 0x04}, 2, 0},
+    {0x9E, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0x9F, (uint8_t[]){0x00, 0x00}, 2, 0},
+
+    {0xA0, (uint8_t[]){0x00, 0x48}, 2, 0},
+    {0xA1, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xA2, (uint8_t[]){0x00, 0x05}, 2, 0},
+    {0xA3, (uint8_t[]){0x00, 0x02}, 2, 0},
+    {0xA4, (uint8_t[]){0x00, 0xD5}, 2, 0},
+    {0xA5, (uint8_t[]){0x00, 0x04}, 2, 0},
+    {0xA6, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xA7, (uint8_t[]){0x00, 0x00}, 2, 0},
+
+    {0xA8, (uint8_t[]){0x00, 0x48}, 2, 0},
+    {0xA9, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xAA, (uint8_t[]){0x00, 0x07}, 2, 0},
+    {0xAB, (uint8_t[]){0x00, 0x02}, 2, 0},
+    {0xAC, (uint8_t[]){0x00, 0xD7}, 2, 0},
+    {0xAD, (uint8_t[]){0x00, 0x04}, 2, 0},
+    {0xAE, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xAF, (uint8_t[]){0x00, 0x00}, 2, 0},
+
+    {0xB0, (uint8_t[]){0x00, 0x48}, 2, 0},
+    {0xB1, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xB2, (uint8_t[]){0x00, 0x09}, 2, 0},
+    {0xB3, (uint8_t[]){0x00, 0x02}, 2, 0},
+    {0xB4, (uint8_t[]){0x00, 0xD9}, 2, 0},
+    {0xB5, (uint8_t[]){0x00, 0x04}, 2, 0},
+    {0xB6, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xB7, (uint8_t[]){0x00, 0x00}, 2, 0},
+
+    {0xB8, (uint8_t[]){0x00, 0x48}, 2, 0},
+    {0xB9, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xBA, (uint8_t[]){0x00, 0x0B}, 2, 0},
+    {0xBB, (uint8_t[]){0x00, 0x02}, 2, 0},
+    {0xBC, (uint8_t[]){0x00, 0xDB}, 2, 0},
+    {0xBD, (uint8_t[]){0x00, 0x04}, 2, 0},
+    {0xBE, (uint8_t[]){0x00, 0x00}, 2, 0},
+    {0xBF, (uint8_t[]){0x00, 0x00}, 2, 0},
+
+    {0xC0, (uint8_t[]){0x00, 0x10}, 2, 0},
+    {0xC1, (uint8_t[]){0x00, 0x47}, 2, 0},
+    {0xC2, (uint8_t[]){0x00, 0x56}, 2, 0},
+    {0xC3, (uint8_t[]){0x00, 0x65}, 2, 0},
+    {0xC4, (uint8_t[]){0x00, 0x74}, 2, 0},
+    {0xC5, (uint8_t[]){0x00, 0x88}, 2, 0},
+    {0xC6, (uint8_t[]){0x00, 0x99}, 2, 0},
+    {0xC7, (uint8_t[]){0x00, 0x01}, 2, 0},
+    {0xC8, (uint8_t[]){0x00, 0xBB}, 2, 0},
+    {0xC9, (uint8_t[]){0x00, 0xAA}, 2, 0},
+
+    {0xD0, (uint8_t[]){0x00, 0x10}, 2, 0},
+    {0xD1, (uint8_t[]){0x00, 0x47}, 2, 0},
+    {0xD2, (uint8_t[]){0x00, 0x56}, 2, 0},
+    {0xD3, (uint8_t[]){0x00, 0x65}, 2, 0},
+    {0xD4, (uint8_t[]){0x00, 0x74}, 2, 0},
+    {0xD5, (uint8_t[]){0x00, 0x88}, 2, 0},
+    {0xD6, (uint8_t[]){0x00, 0x99}, 2, 0},
+    {0xD7, (uint8_t[]){0x00, 0x01}, 2, 0},
+    {0xD8, (uint8_t[]){0x00, 0xBB}, 2, 0},
+    {0xD9, (uint8_t[]){0x00, 0xAA}, 2, 0},
+
+    {0xF3, (uint8_t[]){0x00, 0x01}, 2, 0},
+    {0xF0, (uint8_t[]){0x00, 0x00}, 2, 0},
+
+    // ===== Display ON sequence (Video mode) =====
+    {0x21, (uint8_t[]){}, 0, 0},
+    {0x11, (uint8_t[]){}, 0, 120},
+    {0x29, (uint8_t[]){}, 0, 0},
+    {0x00, (uint8_t[]){}, 0, 0},
+};
+
+static esp_err_t panel_st77916_mipi_del(esp_lcd_panel_t *panel)
+{
+    st77916_mipi_panel_t *st77916_mipi = (st77916_mipi_panel_t *)panel->user_data;
+
+    if (st77916_mipi->reset_gpio_num >= 0) {
+        gpio_reset_pin(st77916_mipi->reset_gpio_num);
+    }
+    // Delete MIPI DPI panel
+    st77916_mipi->del(panel);
+    ESP_LOGD(TAG, "del st77916_mipi panel @%p", st77916_mipi);
+    free(st77916_mipi);
+
+    return ESP_OK;
+}
+
+static esp_err_t panel_st77916_mipi_init(esp_lcd_panel_t *panel)
+{
+    st77916_mipi_panel_t *st77916_mipi = (st77916_mipi_panel_t *)panel->user_data;
+    esp_lcd_panel_io_handle_t io = st77916_mipi->io;
+    const st77916_lcd_init_cmd_t *init_cmds = NULL;
+    uint16_t init_cmds_size = 0;
+    bool is_cmd_overwritten = false;
+
+    uint8_t ID[3];
+    ESP_LOGI(TAG, "read ID");
+    ESP_RETURN_ON_ERROR(esp_lcd_panel_io_rx_param(io, 0x04, ID, 3), TAG, "read ID failed");
+    ESP_LOGI(TAG, "LCD ID: %02X %02X %02X", ID[0], ID[1], ID[2]);
+
+    ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, LCD_CMD_MADCTL, (uint8_t[]) {
+        st77916_mipi->madctl_val,
+    }, 1), TAG, "send command failed");
+
+    // vendor specific initialization, it can be different between manufacturers
+    // should consult the LCD supplier for initialization sequence code
+    if (st77916_mipi->init_cmds) {
+        init_cmds = st77916_mipi->init_cmds;
+        init_cmds_size = st77916_mipi->init_cmds_size;
+    } else {
+        init_cmds = vendor_specific_init_default;
+        init_cmds_size = sizeof(vendor_specific_init_default) / sizeof(st77916_lcd_init_cmd_t);
+    }
+
+    for (int i = 0; i < init_cmds_size; i++) {
+        // Check if the command has been used or conflicts with the internal
+        if (init_cmds[i].data_bytes > 0) {
+            switch (init_cmds[i].cmd) {
+            case LCD_CMD_MADCTL:
+                is_cmd_overwritten = true;
+                st77916_mipi->madctl_val = ((uint8_t *)init_cmds[i].data)[0];
+                break;
+            case LCD_CMD_COLMOD:
+                is_cmd_overwritten = true;
+                st77916_mipi->colmod_val = ((uint8_t *)init_cmds[i].data)[0];
+                break;
+            default:
+                is_cmd_overwritten = false;
+                break;
+            }
+
+            if (is_cmd_overwritten) {
+                is_cmd_overwritten = false;
+                ESP_LOGW(TAG, "The %02Xh command has been used and will be overwritten by external initialization sequence",
+                         init_cmds[i].cmd);
+            }
+        }
+
+        // Send command
+        ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, init_cmds[i].cmd, init_cmds[i].data, init_cmds[i].data_bytes), TAG, "send command failed");
+        vTaskDelay(pdMS_TO_TICKS(init_cmds[i].delay_ms));
+    }
+    ESP_LOGD(TAG, "send init commands success");
+
+    ESP_RETURN_ON_ERROR(st77916_mipi->init(panel), TAG, "init MIPI DPI panel failed");
+
+    return ESP_OK;
+}
+
+static esp_err_t panel_st77916_mipi_reset(esp_lcd_panel_t *panel)
+{
+    st77916_mipi_panel_t *st77916_mipi = (st77916_mipi_panel_t *)panel->user_data;
+    esp_lcd_panel_io_handle_t io = st77916_mipi->io;
+
+    // Perform hardware reset
+    if (st77916_mipi->reset_gpio_num >= 0) {
+        gpio_set_level(st77916_mipi->reset_gpio_num, !st77916_mipi->flags.reset_level);
+        vTaskDelay(pdMS_TO_TICKS(5));
+        gpio_set_level(st77916_mipi->reset_gpio_num, st77916_mipi->flags.reset_level);
+        vTaskDelay(pdMS_TO_TICKS(10));
+        gpio_set_level(st77916_mipi->reset_gpio_num, !st77916_mipi->flags.reset_level);
+        vTaskDelay(pdMS_TO_TICKS(120));
+    } else if (io) { // Perform software reset
+        ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, LCD_CMD_SWRESET, NULL, 0), TAG, "send command failed");
+        vTaskDelay(pdMS_TO_TICKS(120));
+    }
+
+    return ESP_OK;
+}
+
+static esp_err_t panel_st77916_mipi_invert_color(esp_lcd_panel_t *panel, bool invert_color_data)
+{
+    st77916_mipi_panel_t *st77916_mipi = (st77916_mipi_panel_t *)panel->user_data;
+    esp_lcd_panel_io_handle_t io = st77916_mipi->io;
+    uint8_t command = 0;
+
+    ESP_RETURN_ON_FALSE(io, ESP_ERR_INVALID_STATE, TAG, "invalid panel IO");
+
+    if (invert_color_data) {
+        command = LCD_CMD_INVON;
+    } else {
+        command = LCD_CMD_INVOFF;
+    }
+    ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, command, NULL, 0), TAG, "send command failed");
+
+    return ESP_OK;
+}
+
+static esp_err_t panel_st77916_mipi_mirror(esp_lcd_panel_t *panel, bool mirror_x, bool mirror_y)
+{
+    st77916_mipi_panel_t *st77916_mipi = (st77916_mipi_panel_t *)panel->user_data;
+    esp_lcd_panel_io_handle_t io = st77916_mipi->io;
+    uint8_t madctl_val = st77916_mipi->madctl_val;
+
+    ESP_RETURN_ON_FALSE(io, ESP_ERR_INVALID_STATE, TAG, "invalid panel IO");
+
+    // Control mirror through LCD command
+    if (mirror_x) {
+        ESP_LOGW(TAG, "Mirror X is not supported");
+    }
+
+    if (mirror_y) {
+        madctl_val |= BIT(7);
+    } else {
+        madctl_val &= ~BIT(7);
+    }
+
+    ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, LCD_CMD_MADCTL, (uint8_t []) {
+        madctl_val
+    }, 1), TAG, "send command failed");
+    st77916_mipi->madctl_val = madctl_val;
+
+    return ESP_OK;
+}
+
+static esp_err_t panel_st77916_mipi_disp_on_off(esp_lcd_panel_t *panel, bool on_off)
+{
+    st77916_mipi_panel_t *st77916_mipi = (st77916_mipi_panel_t *)panel->user_data;
+    esp_lcd_panel_io_handle_t io = st77916_mipi->io;
+    int command = 0;
+
+    if (on_off) {
+        command = LCD_CMD_DISPON;
+    } else {
+        command = LCD_CMD_DISPOFF;
+    }
+    ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, command, NULL, 0), TAG, "send command failed");
+    return ESP_OK;
+}
+#endif
diff --git a/managed_components/espressif__esp_lcd_st77916/esp_lcd_st77916_spi.c b/managed_components/espressif__esp_lcd_st77916/esp_lcd_st77916_spi.c
new file mode 100644
index 0000000..d52eae7
--- /dev/null
+++ b/managed_components/espressif__esp_lcd_st77916/esp_lcd_st77916_spi.c
@@ -0,0 +1,576 @@
+/*
+ * SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include <stdlib.h>
+#include <sys/cdefs.h>
+
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "driver/gpio.h"
+#include "esp_check.h"
+#include "esp_lcd_panel_interface.h"
+#include "esp_lcd_panel_io.h"
+#include "esp_lcd_panel_vendor.h"
+#include "esp_lcd_panel_ops.h"
+#include "esp_lcd_panel_commands.h"
+#include "esp_log.h"
+
+#include "esp_lcd_st77916.h"
+#include "esp_lcd_st77916_interface.h"
+
+#define LCD_OPCODE_WRITE_CMD        (0x02ULL)
+#define LCD_OPCODE_READ_CMD         (0x0BULL)
+#define LCD_OPCODE_WRITE_COLOR      (0x32ULL)
+
+#define ST77916_CMD_SET             (0xF0)
+#define ST77916_PARAM_SET           (0x00)
+
+static const char *TAG = "st77916_spi";
+
+static esp_err_t panel_st77916_del(esp_lcd_panel_t *panel);
+static esp_err_t panel_st77916_reset(esp_lcd_panel_t *panel);
+static esp_err_t panel_st77916_init(esp_lcd_panel_t *panel);
+static esp_err_t panel_st77916_draw_bitmap(esp_lcd_panel_t *panel, int x_start, int y_start, int x_end, int y_end, const void *color_data);
+static esp_err_t panel_st77916_invert_color(esp_lcd_panel_t *panel, bool invert_color_data);
+static esp_err_t panel_st77916_mirror(esp_lcd_panel_t *panel, bool mirror_x, bool mirror_y);
+static esp_err_t panel_st77916_swap_xy(esp_lcd_panel_t *panel, bool swap_axes);
+static esp_err_t panel_st77916_set_gap(esp_lcd_panel_t *panel, int x_gap, int y_gap);
+static esp_err_t panel_st77916_disp_on_off(esp_lcd_panel_t *panel, bool off);
+
+typedef struct {
+    esp_lcd_panel_t base;
+    esp_lcd_panel_io_handle_t io;
+    int reset_gpio_num;
+    int x_gap;
+    int y_gap;
+    uint8_t fb_bits_per_pixel;
+    uint8_t madctl_val; // save current value of LCD_CMD_MADCTL register
+    uint8_t colmod_val; // save surrent value of LCD_CMD_COLMOD register
+    const st77916_lcd_init_cmd_t *init_cmds;
+    uint16_t init_cmds_size;
+    struct {
+        unsigned int use_qspi_interface: 1;
+        unsigned int reset_level: 1;
+    } flags;
+} st77916_panel_t;
+
+esp_err_t esp_lcd_new_panel_st77916_spi(const esp_lcd_panel_io_handle_t io, const esp_lcd_panel_dev_config_t *panel_dev_config, esp_lcd_panel_handle_t *ret_panel)
+{
+    ESP_RETURN_ON_FALSE(io && panel_dev_config && ret_panel, ESP_ERR_INVALID_ARG, TAG, "invalid argument");
+
+    esp_err_t ret = ESP_OK;
+    st77916_panel_t *st77916 = NULL;
+    st77916 = calloc(1, sizeof(st77916_panel_t));
+    ESP_GOTO_ON_FALSE(st77916, ESP_ERR_NO_MEM, err, TAG, "no mem for st77916 panel");
+
+    if (panel_dev_config->reset_gpio_num >= 0) {
+        gpio_config_t io_conf = {
+            .mode = GPIO_MODE_OUTPUT,
+            .pin_bit_mask = 1ULL << panel_dev_config->reset_gpio_num,
+        };
+        ESP_GOTO_ON_ERROR(gpio_config(&io_conf), err, TAG, "configure GPIO for RST line failed");
+    }
+
+    switch (panel_dev_config->rgb_ele_order) {
+    case LCD_RGB_ELEMENT_ORDER_RGB:
+        st77916->madctl_val = 0;
+        break;
+    case LCD_RGB_ELEMENT_ORDER_BGR:
+        st77916->madctl_val |= LCD_CMD_BGR_BIT;
+        break;
+    default:
+        ESP_GOTO_ON_FALSE(false, ESP_ERR_NOT_SUPPORTED, err, TAG, "unsupported color element order");
+        break;
+    }
+
+    switch (panel_dev_config->bits_per_pixel) {
+    case 16: // RGB565
+        st77916->colmod_val = 0x55;
+        st77916->fb_bits_per_pixel = 16;
+        break;
+    case 18: // RGB666
+        st77916->colmod_val = 0x66;
+        // each color component (R/G/B) should occupy the 6 high bits of a byte, which means 3 full bytes are required for a pixel
+        st77916->fb_bits_per_pixel = 24;
+        break;
+    default:
+        ESP_GOTO_ON_FALSE(false, ESP_ERR_NOT_SUPPORTED, err, TAG, "unsupported pixel width");
+        break;
+    }
+
+    st77916->io = io;
+    st77916->reset_gpio_num = panel_dev_config->reset_gpio_num;
+    st77916->flags.reset_level = panel_dev_config->flags.reset_active_high;
+    st77916_vendor_config_t *vendor_config = (st77916_vendor_config_t *)panel_dev_config->vendor_config;
+    if (vendor_config) {
+        st77916->init_cmds = vendor_config->init_cmds;
+        st77916->init_cmds_size = vendor_config->init_cmds_size;
+        st77916->flags.use_qspi_interface = vendor_config->flags.use_qspi_interface;
+    }
+    st77916->base.del = panel_st77916_del;
+    st77916->base.reset = panel_st77916_reset;
+    st77916->base.init = panel_st77916_init;
+    st77916->base.draw_bitmap = panel_st77916_draw_bitmap;
+    st77916->base.invert_color = panel_st77916_invert_color;
+    st77916->base.set_gap = panel_st77916_set_gap;
+    st77916->base.mirror = panel_st77916_mirror;
+    st77916->base.swap_xy = panel_st77916_swap_xy;
+    st77916->base.disp_on_off = panel_st77916_disp_on_off;
+    *ret_panel = &(st77916->base);
+    ESP_LOGD(TAG, "new st77916 panel @%p", st77916);
+
+    ESP_LOGI(TAG, "LCD panel create success, version: %d.%d.%d", ESP_LCD_ST77916_VER_MAJOR, ESP_LCD_ST77916_VER_MINOR,
+             ESP_LCD_ST77916_VER_PATCH);
+
+    return ESP_OK;
+
+err:
+    if (st77916) {
+        if (panel_dev_config->reset_gpio_num >= 0) {
+            gpio_reset_pin(panel_dev_config->reset_gpio_num);
+        }
+        free(st77916);
+    }
+    return ret;
+}
+
+static esp_err_t tx_param(st77916_panel_t *st77916, esp_lcd_panel_io_handle_t io, int lcd_cmd, const void *param, size_t param_size)
+{
+    if (st77916->flags.use_qspi_interface) {
+        lcd_cmd &= 0xff;
+        lcd_cmd <<= 8;
+        lcd_cmd |= LCD_OPCODE_WRITE_CMD << 24;
+    }
+    return esp_lcd_panel_io_tx_param(io, lcd_cmd, param, param_size);
+}
+
+static esp_err_t tx_color(st77916_panel_t *st77916, esp_lcd_panel_io_handle_t io, int lcd_cmd, const void *param, size_t param_size)
+{
+    if (st77916->flags.use_qspi_interface) {
+        lcd_cmd &= 0xff;
+        lcd_cmd <<= 8;
+        lcd_cmd |= LCD_OPCODE_WRITE_COLOR << 24;
+    }
+    return esp_lcd_panel_io_tx_color(io, lcd_cmd, param, param_size);
+}
+
+static esp_err_t panel_st77916_del(esp_lcd_panel_t *panel)
+{
+    st77916_panel_t *st77916 = __containerof(panel, st77916_panel_t, base);
+
+    if (st77916->reset_gpio_num >= 0) {
+        gpio_reset_pin(st77916->reset_gpio_num);
+    }
+    ESP_LOGD(TAG, "del st77916 panel @%p", st77916);
+    free(st77916);
+    return ESP_OK;
+}
+
+static esp_err_t panel_st77916_reset(esp_lcd_panel_t *panel)
+{
+    st77916_panel_t *st77916 = __containerof(panel, st77916_panel_t, base);
+    esp_lcd_panel_io_handle_t io = st77916->io;
+
+    // Perform hardware reset
+    if (st77916->reset_gpio_num >= 0) {
+        gpio_set_level(st77916->reset_gpio_num, st77916->flags.reset_level);
+        vTaskDelay(pdMS_TO_TICKS(10));
+        gpio_set_level(st77916->reset_gpio_num, !st77916->flags.reset_level);
+        vTaskDelay(pdMS_TO_TICKS(120));
+    } else { // Perform software reset
+        ESP_RETURN_ON_ERROR(tx_param(st77916, io, LCD_CMD_SWRESET, NULL, 0), TAG, "send command failed");
+        vTaskDelay(pdMS_TO_TICKS(120));
+    }
+
+    return ESP_OK;
+}
+
+static const st77916_lcd_init_cmd_t vendor_specific_init_default[] = {
+    {0xF0, (uint8_t []){0x08}, 1, 0},
+    {0xF2, (uint8_t []){0x08}, 1, 0},
+    {0x9B, (uint8_t []){0x51}, 1, 0},
+    {0x86, (uint8_t []){0x53}, 1, 0},
+    {0xF2, (uint8_t []){0x80}, 1, 0},
+    {0xF0, (uint8_t []){0x00}, 1, 0},
+    {0xF0, (uint8_t []){0x01}, 1, 0},
+    {0xF1, (uint8_t []){0x01}, 1, 0},
+    {0xB0, (uint8_t []){0x54}, 1, 0},
+    {0xB1, (uint8_t []){0x3F}, 1, 0},
+    {0xB2, (uint8_t []){0x2A}, 1, 0},
+    {0xB4, (uint8_t []){0x46}, 1, 0},
+    {0xB5, (uint8_t []){0x34}, 1, 0},
+    {0xB6, (uint8_t []){0xD5}, 1, 0},
+    {0xB7, (uint8_t []){0x30}, 1, 0},
+    {0xB8, (uint8_t []){0x04}, 1, 0},
+    {0xBA, (uint8_t []){0x00}, 1, 0},
+    {0xBB, (uint8_t []){0x08}, 1, 0},
+    {0xBC, (uint8_t []){0x08}, 1, 0},
+    {0xBD, (uint8_t []){0x00}, 1, 0},
+    {0xC0, (uint8_t []){0x80}, 1, 0},
+    {0xC1, (uint8_t []){0x10}, 1, 0},
+    {0xC2, (uint8_t []){0x37}, 1, 0},
+    {0xC3, (uint8_t []){0x80}, 1, 0},
+    {0xC4, (uint8_t []){0x10}, 1, 0},
+    {0xC5, (uint8_t []){0x37}, 1, 0},
+    {0xC6, (uint8_t []){0xA9}, 1, 0},
+    {0xC7, (uint8_t []){0x41}, 1, 0},
+    {0xC8, (uint8_t []){0x51}, 1, 0},
+    {0xC9, (uint8_t []){0xA9}, 1, 0},
+    {0xCA, (uint8_t []){0x41}, 1, 0},
+    {0xCB, (uint8_t []){0x51}, 1, 0},
+    {0xD0, (uint8_t []){0x91}, 1, 0},
+    {0xD1, (uint8_t []){0x68}, 1, 0},
+    {0xD2, (uint8_t []){0x69}, 1, 0},
+    {0xF5, (uint8_t []){0x00, 0xA5}, 2, 0},
+    {0xDD, (uint8_t []){0x35}, 1, 0},
+    {0xDE, (uint8_t []){0x35}, 1, 0},
+    {0xF1, (uint8_t []){0x10}, 1, 0},
+    {0xF0, (uint8_t []){0x00}, 1, 0},
+    {0xF0, (uint8_t []){0x02}, 1, 0},
+    {0xE0, (uint8_t []){0x70, 0x09, 0x12, 0x0C, 0x0B, 0x27, 0x38, 0x54, 0x4E, 0x19, 0x15, 0x15, 0x2C, 0x2F}, 14, 0},
+    {0xE1, (uint8_t []){0x70, 0x08, 0x11, 0x0C, 0x0B, 0x27, 0x38, 0x43, 0x4C, 0x18, 0x14, 0x14, 0x2B, 0x2D}, 14, 0},
+    {0xF0, (uint8_t []){0x10}, 1, 0},
+    {0xF3, (uint8_t []){0x10}, 1, 0},
+    {0xE0, (uint8_t []){0x0A}, 1, 0},
+    {0xE1, (uint8_t []){0x00}, 1, 0},
+    {0xE2, (uint8_t []){0x0B}, 1, 0},
+    {0xE3, (uint8_t []){0x00}, 1, 0},
+    {0xE4, (uint8_t []){0xE0}, 1, 0},
+    {0xE5, (uint8_t []){0x06}, 1, 0},
+    {0xE6, (uint8_t []){0x21}, 1, 0},
+    {0xE7, (uint8_t []){0x00}, 1, 0},
+    {0xE8, (uint8_t []){0x05}, 1, 0},
+    {0xE9, (uint8_t []){0x82}, 1, 0},
+    {0xEA, (uint8_t []){0xDF}, 1, 0},
+    {0xEB, (uint8_t []){0x89}, 1, 0},
+    {0xEC, (uint8_t []){0x20}, 1, 0},
+    {0xED, (uint8_t []){0x14}, 1, 0},
+    {0xEE, (uint8_t []){0xFF}, 1, 0},
+    {0xEF, (uint8_t []){0x00}, 1, 0},
+    {0xF8, (uint8_t []){0xFF}, 1, 0},
+    {0xF9, (uint8_t []){0x00}, 1, 0},
+    {0xFA, (uint8_t []){0x00}, 1, 0},
+    {0xFB, (uint8_t []){0x30}, 1, 0},
+    {0xFC, (uint8_t []){0x00}, 1, 0},
+    {0xFD, (uint8_t []){0x00}, 1, 0},
+    {0xFE, (uint8_t []){0x00}, 1, 0},
+    {0xFF, (uint8_t []){0x00}, 1, 0},
+    {0x60, (uint8_t []){0x42}, 1, 0},
+    {0x61, (uint8_t []){0xE0}, 1, 0},
+    {0x62, (uint8_t []){0x40}, 1, 0},
+    {0x63, (uint8_t []){0x40}, 1, 0},
+    {0x64, (uint8_t []){0x02}, 1, 0},
+    {0x65, (uint8_t []){0x00}, 1, 0},
+    {0x66, (uint8_t []){0x40}, 1, 0},
+    {0x67, (uint8_t []){0x03}, 1, 0},
+    {0x68, (uint8_t []){0x00}, 1, 0},
+    {0x69, (uint8_t []){0x00}, 1, 0},
+    {0x6A, (uint8_t []){0x00}, 1, 0},
+    {0x6B, (uint8_t []){0x00}, 1, 0},
+    {0x70, (uint8_t []){0x42}, 1, 0},
+    {0x71, (uint8_t []){0xE0}, 1, 0},
+    {0x72, (uint8_t []){0x40}, 1, 0},
+    {0x73, (uint8_t []){0x40}, 1, 0},
+    {0x74, (uint8_t []){0x02}, 1, 0},
+    {0x75, (uint8_t []){0x00}, 1, 0},
+    {0x76, (uint8_t []){0x40}, 1, 0},
+    {0x77, (uint8_t []){0x03}, 1, 0},
+    {0x78, (uint8_t []){0x00}, 1, 0},
+    {0x79, (uint8_t []){0x00}, 1, 0},
+    {0x7A, (uint8_t []){0x00}, 1, 0},
+    {0x7B, (uint8_t []){0x00}, 1, 0},
+    {0x80, (uint8_t []){0x38}, 1, 0},
+    {0x81, (uint8_t []){0x00}, 1, 0},
+    {0x82, (uint8_t []){0x04}, 1, 0},
+    {0x83, (uint8_t []){0x02}, 1, 0},
+    {0x84, (uint8_t []){0xDC}, 1, 0},
+    {0x85, (uint8_t []){0x00}, 1, 0},
+    {0x86, (uint8_t []){0x00}, 1, 0},
+    {0x87, (uint8_t []){0x00}, 1, 0},
+    {0x88, (uint8_t []){0x38}, 1, 0},
+    {0x89, (uint8_t []){0x00}, 1, 0},
+    {0x8A, (uint8_t []){0x06}, 1, 0},
+    {0x8B, (uint8_t []){0x02}, 1, 0},
+    {0x8C, (uint8_t []){0xDE}, 1, 0},
+    {0x8D, (uint8_t []){0x00}, 1, 0},
+    {0x8E, (uint8_t []){0x00}, 1, 0},
+    {0x8F, (uint8_t []){0x00}, 1, 0},
+    {0x90, (uint8_t []){0x38}, 1, 0},
+    {0x91, (uint8_t []){0x00}, 1, 0},
+    {0x92, (uint8_t []){0x08}, 1, 0},
+    {0x93, (uint8_t []){0x02}, 1, 0},
+    {0x94, (uint8_t []){0xE0}, 1, 0},
+    {0x95, (uint8_t []){0x00}, 1, 0},
+    {0x96, (uint8_t []){0x00}, 1, 0},
+    {0x97, (uint8_t []){0x00}, 1, 0},
+    {0x98, (uint8_t []){0x38}, 1, 0},
+    {0x99, (uint8_t []){0x00}, 1, 0},
+    {0x9A, (uint8_t []){0x0A}, 1, 0},
+    {0x9B, (uint8_t []){0x02}, 1, 0},
+    {0x9C, (uint8_t []){0xE2}, 1, 0},
+    {0x9D, (uint8_t []){0x00}, 1, 0},
+    {0x9E, (uint8_t []){0x00}, 1, 0},
+    {0x9F, (uint8_t []){0x00}, 1, 0},
+    {0xA0, (uint8_t []){0x38}, 1, 0},
+    {0xA1, (uint8_t []){0x00}, 1, 0},
+    {0xA2, (uint8_t []){0x03}, 1, 0},
+    {0xA3, (uint8_t []){0x02}, 1, 0},
+    {0xA4, (uint8_t []){0xDB}, 1, 0},
+    {0xA5, (uint8_t []){0x00}, 1, 0},
+    {0xA6, (uint8_t []){0x00}, 1, 0},
+    {0xA7, (uint8_t []){0x00}, 1, 0},
+    {0xA8, (uint8_t []){0x38}, 1, 0},
+    {0xA9, (uint8_t []){0x00}, 1, 0},
+    {0xAA, (uint8_t []){0x05}, 1, 0},
+    {0xAB, (uint8_t []){0x02}, 1, 0},
+    {0xAC, (uint8_t []){0xDD}, 1, 0},
+    {0xAD, (uint8_t []){0x00}, 1, 0},
+    {0xAE, (uint8_t []){0x00}, 1, 0},
+    {0xAF, (uint8_t []){0x00}, 1, 0},
+    {0xB0, (uint8_t []){0x38}, 1, 0},
+    {0xB1, (uint8_t []){0x00}, 1, 0},
+    {0xB2, (uint8_t []){0x07}, 1, 0},
+    {0xB3, (uint8_t []){0x02}, 1, 0},
+    {0xB4, (uint8_t []){0xDF}, 1, 0},
+    {0xB5, (uint8_t []){0x00}, 1, 0},
+    {0xB6, (uint8_t []){0x00}, 1, 0},
+    {0xB7, (uint8_t []){0x00}, 1, 0},
+    {0xB8, (uint8_t []){0x38}, 1, 0},
+    {0xB9, (uint8_t []){0x00}, 1, 0},
+    {0xBA, (uint8_t []){0x09}, 1, 0},
+    {0xBB, (uint8_t []){0x02}, 1, 0},
+    {0xBC, (uint8_t []){0xE1}, 1, 0},
+    {0xBD, (uint8_t []){0x00}, 1, 0},
+    {0xBE, (uint8_t []){0x00}, 1, 0},
+    {0xBF, (uint8_t []){0x00}, 1, 0},
+    {0xC0, (uint8_t []){0x22}, 1, 0},
+    {0xC1, (uint8_t []){0xAA}, 1, 0},
+    {0xC2, (uint8_t []){0x65}, 1, 0},
+    {0xC3, (uint8_t []){0x74}, 1, 0},
+    {0xC4, (uint8_t []){0x47}, 1, 0},
+    {0xC5, (uint8_t []){0x56}, 1, 0},
+    {0xC6, (uint8_t []){0x00}, 1, 0},
+    {0xC7, (uint8_t []){0x88}, 1, 0},
+    {0xC8, (uint8_t []){0x99}, 1, 0},
+    {0xC9, (uint8_t []){0x33}, 1, 0},
+    {0xD0, (uint8_t []){0x11}, 1, 0},
+    {0xD1, (uint8_t []){0xAA}, 1, 0},
+    {0xD2, (uint8_t []){0x65}, 1, 0},
+    {0xD3, (uint8_t []){0x74}, 1, 0},
+    {0xD4, (uint8_t []){0x47}, 1, 0},
+    {0xD5, (uint8_t []){0x56}, 1, 0},
+    {0xD6, (uint8_t []){0x00}, 1, 0},
+    {0xD7, (uint8_t []){0x88}, 1, 0},
+    {0xD8, (uint8_t []){0x99}, 1, 0},
+    {0xD9, (uint8_t []){0x33}, 1, 0},
+    {0xF3, (uint8_t []){0x01}, 1, 0},
+    {0xF0, (uint8_t []){0x00}, 1, 0},
+    {0xF0, (uint8_t []){0x01}, 1, 0},
+    {0xF1, (uint8_t []){0x01}, 1, 0},
+    {0xA0, (uint8_t []){0x0B}, 1, 0},
+    {0xA3, (uint8_t []){0x2A}, 1, 0},
+    {0xA5, (uint8_t []){0xC3}, 1, 1},
+    {0xA3, (uint8_t []){0x2B}, 1, 0},
+    {0xA5, (uint8_t []){0xC3}, 1, 1},
+    {0xA3, (uint8_t []){0x2C}, 1, 0},
+    {0xA5, (uint8_t []){0xC3}, 1, 1},
+    {0xA3, (uint8_t []){0x2D}, 1, 0},
+    {0xA5, (uint8_t []){0xC3}, 1, 1},
+    {0xA3, (uint8_t []){0x2E}, 1, 0},
+    {0xA5, (uint8_t []){0xC3}, 1, 1},
+    {0xA3, (uint8_t []){0x2F}, 1, 0},
+    {0xA5, (uint8_t []){0xC3}, 1, 1},
+    {0xA3, (uint8_t []){0x30}, 1, 0},
+    {0xA5, (uint8_t []){0xC3}, 1, 1},
+    {0xA3, (uint8_t []){0x31}, 1, 0},
+    {0xA5, (uint8_t []){0xC3}, 1, 1},
+    {0xA3, (uint8_t []){0x32}, 1, 0},
+    {0xA5, (uint8_t []){0xC3}, 1, 1},
+    {0xA3, (uint8_t []){0x33}, 1, 0},
+    {0xA5, (uint8_t []){0xC3}, 1, 1},
+    {0xA0, (uint8_t []){0x09}, 1, 0},
+    {0xF1, (uint8_t []){0x10}, 1, 0},
+    {0xF0, (uint8_t []){0x00}, 1, 0},
+    {0x2A, (uint8_t []){0x00, 0x00, 0x01, 0x67}, 4, 0},
+    {0x2B, (uint8_t []){0x01, 0x68, 0x01, 0x68}, 4, 0},
+    {0x4D, (uint8_t []){0x00}, 1, 0},
+    {0x4E, (uint8_t []){0x00}, 1, 0},
+    {0x4F, (uint8_t []){0x00}, 1, 0},
+    {0x4C, (uint8_t []){0x01}, 1, 10},
+    {0x4C, (uint8_t []){0x00}, 1, 0},
+    {0x2A, (uint8_t []){0x00, 0x00, 0x01, 0x67}, 4, 0},
+    {0x2B, (uint8_t []){0x00, 0x00, 0x01, 0x67}, 4, 0},
+    {0x21, (uint8_t []){0x00}, 1, 0},
+    {0x11, (uint8_t []){0x00}, 1, 120},
+};
+
+static esp_err_t panel_st77916_init(esp_lcd_panel_t *panel)
+{
+    st77916_panel_t *st77916 = __containerof(panel, st77916_panel_t, base);
+    esp_lcd_panel_io_handle_t io = st77916->io;
+    const st77916_lcd_init_cmd_t *init_cmds = NULL;
+    uint16_t init_cmds_size = 0;
+    bool is_user_set = true;
+    bool is_cmd_overwritten = false;
+
+    ESP_RETURN_ON_ERROR(tx_param(st77916, io, LCD_CMD_MADCTL, (uint8_t[]) {
+        st77916->madctl_val,
+    }, 1), TAG, "send command failed");
+    ESP_RETURN_ON_ERROR(tx_param(st77916, io, LCD_CMD_COLMOD, (uint8_t[]) {
+        st77916->colmod_val,
+    }, 1), TAG, "send command failed");
+
+    // vendor specific initialization, it can be different between manufacturers
+    // should consult the LCD supplier for initialization sequence code
+    if (st77916->init_cmds) {
+        init_cmds = st77916->init_cmds;
+        init_cmds_size = st77916->init_cmds_size;
+    } else {
+        init_cmds = vendor_specific_init_default;
+        init_cmds_size = sizeof(vendor_specific_init_default) / sizeof(st77916_lcd_init_cmd_t);
+    }
+
+    for (int i = 0; i < init_cmds_size; i++) {
+        // Check if the command has been used or conflicts with the internal
+        if (is_user_set && (init_cmds[i].data_bytes > 0)) {
+            switch (init_cmds[i].cmd) {
+            case LCD_CMD_MADCTL:
+                is_cmd_overwritten = true;
+                st77916->madctl_val = ((uint8_t *)init_cmds[i].data)[0];
+                break;
+            case LCD_CMD_COLMOD:
+                is_cmd_overwritten = true;
+                st77916->colmod_val = ((uint8_t *)init_cmds[i].data)[0];
+                break;
+            default:
+                is_cmd_overwritten = false;
+                break;
+            }
+
+            if (is_cmd_overwritten) {
+                is_cmd_overwritten = false;
+                ESP_LOGW(TAG, "The %02Xh command has been used and will be overwritten by external initialization sequence", init_cmds[i].cmd);
+            }
+        }
+
+        // Send command
+        ESP_RETURN_ON_ERROR(tx_param(st77916, io, init_cmds[i].cmd, init_cmds[i].data, init_cmds[i].data_bytes), TAG, "send command failed");
+        vTaskDelay(pdMS_TO_TICKS(init_cmds[i].delay_ms));
+
+        // Check if the current cmd is the "command set" cmd
+        if ((init_cmds[i].cmd == ST77916_CMD_SET)) {
+            is_user_set = ((uint8_t *)init_cmds[i].data)[0] == ST77916_PARAM_SET ? true : false;
+        }
+    }
+    ESP_LOGD(TAG, "send init commands success");
+
+    return ESP_OK;
+}
+
+static esp_err_t panel_st77916_draw_bitmap(esp_lcd_panel_t *panel, int x_start, int y_start, int x_end, int y_end, const void *color_data)
+{
+    st77916_panel_t *st77916 = __containerof(panel, st77916_panel_t, base);
+    assert((x_start < x_end) && (y_start < y_end) && "start position must be smaller than end position");
+    esp_lcd_panel_io_handle_t io = st77916->io;
+
+    x_start += st77916->x_gap;
+    x_end += st77916->x_gap;
+    y_start += st77916->y_gap;
+    y_end += st77916->y_gap;
+
+    // define an area of frame memory where MCU can access
+    ESP_RETURN_ON_ERROR(tx_param(st77916, io, LCD_CMD_CASET, (uint8_t[]) {
+        (x_start >> 8) & 0xFF,
+        x_start & 0xFF,
+        ((x_end - 1) >> 8) & 0xFF,
+        (x_end - 1) & 0xFF,
+    }, 4), TAG, "send command failed");
+    ESP_RETURN_ON_ERROR(tx_param(st77916, io, LCD_CMD_RASET, (uint8_t[]) {
+        (y_start >> 8) & 0xFF,
+        y_start & 0xFF,
+        ((y_end - 1) >> 8) & 0xFF,
+        (y_end - 1) & 0xFF,
+    }, 4), TAG, "send command failed");
+    // transfer frame buffer
+    size_t len = (x_end - x_start) * (y_end - y_start) * st77916->fb_bits_per_pixel / 8;
+    ESP_RETURN_ON_ERROR(tx_color(st77916, io, LCD_CMD_RAMWR, color_data, len), TAG, "send color data failed");
+
+    return ESP_OK;
+}
+
+static esp_err_t panel_st77916_invert_color(esp_lcd_panel_t *panel, bool invert_color_data)
+{
+    st77916_panel_t *st77916 = __containerof(panel, st77916_panel_t, base);
+    esp_lcd_panel_io_handle_t io = st77916->io;
+    int command = 0;
+    if (invert_color_data) {
+        command = LCD_CMD_INVON;
+    } else {
+        command = LCD_CMD_INVOFF;
+    }
+    ESP_RETURN_ON_ERROR(tx_param(st77916, io, command, NULL, 0), TAG, "send command failed");
+    return ESP_OK;
+}
+
+static esp_err_t panel_st77916_mirror(esp_lcd_panel_t *panel, bool mirror_x, bool mirror_y)
+{
+    st77916_panel_t *st77916 = __containerof(panel, st77916_panel_t, base);
+    esp_lcd_panel_io_handle_t io = st77916->io;
+    esp_err_t ret = ESP_OK;
+
+    if (mirror_x) {
+        st77916->madctl_val |= BIT(6);
+    } else {
+        st77916->madctl_val &= ~BIT(6);
+    }
+    if (mirror_y) {
+        st77916->madctl_val |= BIT(7);
+    } else {
+        st77916->madctl_val &= ~BIT(7);
+    }
+    ESP_RETURN_ON_ERROR(tx_param(st77916, io, LCD_CMD_MADCTL, (uint8_t[]) {
+        st77916->madctl_val
+    }, 1), TAG, "send command failed");
+    return ret;
+}
+
+static esp_err_t panel_st77916_swap_xy(esp_lcd_panel_t *panel, bool swap_axes)
+{
+    st77916_panel_t *st77916 = __containerof(panel, st77916_panel_t, base);
+    esp_lcd_panel_io_handle_t io = st77916->io;
+    if (swap_axes) {
+        st77916->madctl_val |= LCD_CMD_MV_BIT;
+    } else {
+        st77916->madctl_val &= ~LCD_CMD_MV_BIT;
+    }
+    ESP_RETURN_ON_ERROR(tx_param(st77916, io, LCD_CMD_MADCTL, (uint8_t[]) {
+        st77916->madctl_val
+    }, 1), TAG, "send command failed");
+    return ESP_OK;
+}
+
+static esp_err_t panel_st77916_set_gap(esp_lcd_panel_t *panel, int x_gap, int y_gap)
+{
+    st77916_panel_t *st77916 = __containerof(panel, st77916_panel_t, base);
+    st77916->x_gap = x_gap;
+    st77916->y_gap = y_gap;
+    return ESP_OK;
+}
+
+static esp_err_t panel_st77916_disp_on_off(esp_lcd_panel_t *panel, bool on_off)
+{
+    st77916_panel_t *st77916 = __containerof(panel, st77916_panel_t, base);
+    esp_lcd_panel_io_handle_t io = st77916->io;
+    int command = 0;
+
+    if (on_off) {
+        command = LCD_CMD_DISPON;
+    } else {
+        command = LCD_CMD_DISPOFF;
+    }
+    ESP_RETURN_ON_ERROR(tx_param(st77916, io, command, NULL, 0), TAG, "send command failed");
+    return ESP_OK;
+}
diff --git a/managed_components/espressif__esp_lcd_st77916/idf_component.yml b/managed_components/espressif__esp_lcd_st77916/idf_component.yml
index 7b5b2a1..c3d9dbb 100644
--- a/managed_components/espressif__esp_lcd_st77916/idf_component.yml
+++ b/managed_components/espressif__esp_lcd_st77916/idf_component.yml
@@ -1,11 +1,11 @@
 dependencies:
   cmake_utilities: 0.*
-  idf: '>5.0.4,!=5.1.1'
+  idf: '>=5.4'
 description: ESP LCD ST77916(SPI & QSPI)
 issues: https://github.com/espressif/esp-iot-solution/issues
 repository: git://github.com/espressif/esp-iot-solution.git
 repository_info:
-  commit_sha: 6a112f4ddfeaf30ec360567ea9260a39e195c385
+  commit_sha: 91aeb7fb41e8a3e76aeb21371f9f83711c74cf3f
   path: components/display/lcd/esp_lcd_st77916
 url: https://github.com/espressif/esp-iot-solution/tree/master/components/display/lcd/esp_lcd_st77916
-version: 1.0.1
+version: 2.0.2
diff --git a/managed_components/espressif__esp_lcd_st77916/include/esp_lcd_st77916.h b/managed_components/espressif__esp_lcd_st77916/include/esp_lcd_st77916.h
index cd4311c..4bdd572 100644
--- a/managed_components/espressif__esp_lcd_st77916/include/esp_lcd_st77916.h
+++ b/managed_components/espressif__esp_lcd_st77916/include/esp_lcd_st77916.h
@@ -7,8 +7,13 @@
 
 #include <stdint.h>
 
+#include "hal/lcd_types.h"
 #include "esp_lcd_panel_vendor.h"
 
+#if SOC_MIPI_DSI_SUPPORTED
+#include "esp_lcd_mipi_dsi.h"
+#endif
+
 #ifdef __cplusplus
 extern "C" {
 #endif
@@ -33,12 +38,22 @@ typedef struct {
  */
 typedef struct {
     const st77916_lcd_init_cmd_t *init_cmds;    /*!< Pointer to initialization commands array.
+                                                 *  Set to NULL if using default commands.
                                                  *  The array should be declared as `static const` and positioned outside the function.
                                                  *  Please refer to `vendor_specific_init_default` in source file
                                                  */
     uint16_t init_cmds_size;    /*<! Number of commands in above array */
+    union {
+#if SOC_MIPI_DSI_SUPPORTED
+        struct {
+            esp_lcd_dsi_bus_handle_t dsi_bus;               /*!< MIPI-DSI bus configuration */
+            const esp_lcd_dpi_panel_config_t *dpi_config;   /*!< MIPI-DPI panel configuration */
+        } mipi_config;
+#endif
+    };
     struct {
-        unsigned int use_qspi_interface: 1;     /*<! Set to 1 if use QSPI interface, default is SPI interface */
+        unsigned int use_mipi_interface: 1;     /*<! Set to 1 if using MIPI interface, default is SPI interface */
+        unsigned int use_qspi_interface: 1;     /*<! Set to 1 if use QSPI interface, default is SPI interface (only valid for SPI mode) */
     } flags;
 } st77916_vendor_config_t;
 
@@ -109,6 +124,95 @@ esp_err_t esp_lcd_new_panel_st77916(const esp_lcd_panel_io_handle_t io, const es
         },                                                      \
     }
 
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+///////////////////////////// Default Configuration Macros for MIPI-DSI Interface //////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+#if SOC_MIPI_DSI_SUPPORTED
+/**
+ * @brief MIPI-DSI bus configuration structure
+ *
+ * @param[in] lane_num Number of data lanes
+ * @param[in] lane_mbps Lane bit rate in Mbps
+ *
+ */
+#define ST77916_PANEL_BUS_DSI_1CH_CONFIG()                \
+    {                                                     \
+        .bus_id = 0,                                      \
+        .num_data_lanes = 1,                              \
+        .phy_clk_src = MIPI_DSI_PHY_CLK_SRC_DEFAULT,      \
+        .lane_bit_rate_mbps = 480,                        \
+    }
+
+/**
+ * @brief MIPI-DBI panel IO configuration structure
+ *
+ */
+#define ST77916_PANEL_IO_DBI_CONFIG()  \
+    {                                  \
+        .virtual_channel = 0,          \
+        .lcd_cmd_bits = 8,             \
+        .lcd_param_bits = 8,           \
+    }
+
+/**
+ * @brief MIPI DPI configuration structure
+ *
+ * @note  refresh_rate = (dpi_clock_freq_mhz * 1000000) / (h_res + hsync_pulse_width + hsync_back_porch + hsync_front_porch)
+ *                                                      / (v_res + vsync_pulse_width + vsync_back_porch + vsync_front_porch)
+ *
+ * @param[in] px_format Pixel format of the panel
+ *
+ */
+#define ST77916_360_360_PANEL_60HZ_DPI_CONFIG(px_format) \
+    {                                                    \
+        .dpi_clk_src = MIPI_DSI_DPI_CLK_SRC_DEFAULT,     \
+        .dpi_clock_freq_mhz = 11,                        \
+        .virtual_channel = 0,                            \
+        .pixel_format = px_format,                       \
+        .num_fbs = 1,                                    \
+        .video_timing = {                                \
+            .h_size = 360,                               \
+            .v_size = 360,                               \
+            .hsync_back_porch = 60,                      \
+            .hsync_pulse_width = 12,                     \
+            .hsync_front_porch = 20,                     \
+            .vsync_back_porch = 20,                      \
+            .vsync_pulse_width = 12,                     \
+            .vsync_front_porch = 20,                     \
+        },                                               \
+        .flags.use_dma2d = true,                         \
+    }
+
+/**
+ * @brief MIPI DPI configuration structure
+ *
+ * @note  refresh_rate = (dpi_clock_freq_mhz * 1000000) / (h_res + hsync_pulse_width + hsync_back_porch + hsync_front_porch)
+ *                                                      / (v_res + vsync_pulse_width + vsync_back_porch + vsync_front_porch)
+ *
+ * @param[in] color_format Input color format of the panel
+ *
+ */
+#define ST77916_360_360_PANEL_60HZ_DPI_CONFIG_CF(color_format) \
+    {                                                    \
+        .dpi_clk_src = MIPI_DSI_DPI_CLK_SRC_DEFAULT,     \
+        .dpi_clock_freq_mhz = 11,                        \
+        .virtual_channel = 0,                            \
+        .in_color_format = color_format,                 \
+        .num_fbs = 1,                                    \
+        .video_timing = {                                \
+            .h_size = 360,                               \
+            .v_size = 360,                               \
+            .hsync_back_porch = 60,                      \
+            .hsync_pulse_width = 12,                     \
+            .hsync_front_porch = 20,                     \
+            .vsync_back_porch = 20,                      \
+            .vsync_pulse_width = 12,                     \
+            .vsync_front_porch = 20,                     \
+        },                                               \
+        .flags.use_dma2d = true,                         \
+    }
+#endif
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/managed_components/espressif__esp_lcd_st77916/priv_include/esp_lcd_st77916_interface.h b/managed_components/espressif__esp_lcd_st77916/priv_include/esp_lcd_st77916_interface.h
new file mode 100644
index 0000000..5b69f1c
--- /dev/null
+++ b/managed_components/espressif__esp_lcd_st77916/priv_include/esp_lcd_st77916_interface.h
@@ -0,0 +1,46 @@
+/*
+ * SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+#pragma once
+
+#include "esp_err.h"
+#include "esp_lcd_types.h"
+#include "esp_lcd_panel_vendor.h"
+#include "soc/soc_caps.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief  Initialize ST77916 LCD panel with SPI/QSPI interface
+ *
+ * @param[in]  io LCD panel IO handle
+ * @param[in]  panel_dev_config LCD panel device configuration
+ * @param[out] ret_panel LCD panel handle
+ * @return
+ *      - ESP_OK:    Success
+ *      - Otherwise: Fail
+ */
+esp_err_t esp_lcd_new_panel_st77916_spi(const esp_lcd_panel_io_handle_t io, const esp_lcd_panel_dev_config_t *panel_dev_config, esp_lcd_panel_handle_t *ret_panel);
+
+#if SOC_MIPI_DSI_SUPPORTED
+/**
+ * @brief  Initialize ST77916 LCD panel with MIPI interface
+ *
+ * @param[in]  io LCD panel IO handle
+ * @param[in]  panel_dev_config LCD panel device configuration
+ * @param[out] ret_panel LCD panel handle
+ * @return
+ *      - ESP_OK:    Success
+ *      - Otherwise: Fail
+ */
+esp_err_t esp_lcd_new_panel_st77916_mipi(const esp_lcd_panel_io_handle_t io, const esp_lcd_panel_dev_config_t *panel_dev_config,
+                                         esp_lcd_panel_handle_t *ret_panel);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/managed_components/espressif__esp_lcd_st77916/test_apps/CMakeLists.txt b/managed_components/espressif__esp_lcd_st77916/test_apps/CMakeLists.txt
index 8cb07e3..9639266 100644
--- a/managed_components/espressif__esp_lcd_st77916/test_apps/CMakeLists.txt
+++ b/managed_components/espressif__esp_lcd_st77916/test_apps/CMakeLists.txt
@@ -1,6 +1,6 @@
 # The following lines of boilerplate have to be in your project's CMakeLists
 # in this exact order for cmake to work correctly
 cmake_minimum_required(VERSION 3.5)
-set(EXTRA_COMPONENT_DIRS "$ENV{IDF_PATH}/tools/unit-test-app/components")
+
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)
 project(test_esp_lcd_st77916)
diff --git a/managed_components/espressif__esp_lcd_st77916/test_apps/main/CMakeLists.txt b/managed_components/espressif__esp_lcd_st77916/test_apps/main/CMakeLists.txt
index 8f8d0e5..57ddea5 100644
--- a/managed_components/espressif__esp_lcd_st77916/test_apps/main/CMakeLists.txt
+++ b/managed_components/espressif__esp_lcd_st77916/test_apps/main/CMakeLists.txt
@@ -1 +1,3 @@
-idf_component_register(SRCS "test_esp_lcd_st77916.c")
+idf_component_register(SRC_DIRS "."
+                       INCLUDE_DIRS "."
+                       WHOLE_ARCHIVE)
diff --git a/managed_components/espressif__esp_lcd_st77916/test_apps/main/test_app_main.c b/managed_components/espressif__esp_lcd_st77916/test_apps/main/test_app_main.c
new file mode 100644
index 0000000..5092a2b
--- /dev/null
+++ b/managed_components/espressif__esp_lcd_st77916/test_apps/main/test_app_main.c
@@ -0,0 +1,47 @@
+/*
+ * SPDX-FileCopyrightText: 2022 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include "unity.h"
+#include "unity_test_runner.h"
+#include "unity_test_utils_memory.h"
+#include "esp_heap_caps.h"
+
+// Some resources are lazy allocated in the LCD driver, the threadhold is left for that case
+#define TEST_MEMORY_LEAK_THRESHOLD  (300)
+
+static size_t before_free_8bit;
+static size_t before_free_32bit;
+
+void setUp(void)
+{
+    before_free_8bit = heap_caps_get_free_size(MALLOC_CAP_8BIT);
+    before_free_32bit = heap_caps_get_free_size(MALLOC_CAP_32BIT);
+}
+
+void tearDown(void)
+{
+    size_t after_free_8bit = heap_caps_get_free_size(MALLOC_CAP_8BIT);
+    size_t after_free_32bit = heap_caps_get_free_size(MALLOC_CAP_32BIT);
+    unity_utils_check_leak(before_free_8bit, after_free_8bit, "8BIT", TEST_MEMORY_LEAK_THRESHOLD);
+    unity_utils_check_leak(before_free_32bit, after_free_32bit, "32BIT", TEST_MEMORY_LEAK_THRESHOLD);
+}
+
+void app_main(void)
+{
+    /**
+     *  __  _____ _____ _____ ___  _  __
+     * / _\/__   \___  |___  / _ \/ |/ /_
+     * \ \   / /\/  / /   / / (_) | | '_ \
+     * _\ \ / /    / /   / / \__, | | (_) |
+     * \__/ \/    /_/   /_/    /_/|_|\___/
+     */
+    printf("  __  _____ _____ _____ ___  _  __\r\n");
+    printf(" / _\\/__   \\___  |___  / _ \\/ |/ /_\r\n");
+    printf(" \\ \\   / /\\/  / /   / / (_) | | '_ \\\r\n");
+    printf(" _\\ \\ / /    / /   / / \\__, | | (_) |\r\n");
+    printf(" \\__/ \\/    /_/   /_/    /_/|_|\\___/\r\n");
+    unity_run_menu();
+}
diff --git a/managed_components/espressif__esp_lcd_st77916/test_apps/main/test_esp_lcd_st77916_mipi.c b/managed_components/espressif__esp_lcd_st77916/test_apps/main/test_esp_lcd_st77916_mipi.c
new file mode 100644
index 0000000..8f58bc4
--- /dev/null
+++ b/managed_components/espressif__esp_lcd_st77916/test_apps/main/test_esp_lcd_st77916_mipi.c
@@ -0,0 +1,245 @@
+/*
+ * SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+#include "soc/soc_caps.h"
+
+#if SOC_MIPI_DSI_SUPPORTED
+#include <inttypes.h>
+
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "driver/gpio.h"
+#include "esp_heap_caps.h"
+#include "esp_log.h"
+#include "esp_timer.h"
+#include "esp_lcd_panel_ops.h"
+#include "esp_lcd_panel_io.h"
+#include "esp_ldo_regulator.h"
+#include "unity.h"
+#include "unity_test_runner.h"
+#include "unity_test_utils_memory.h"
+
+#include "esp_lcd_mipi_dsi.h"
+#include "esp_lcd_st77916.h"
+
+#define TEST_LCD_H_RES                          (360)
+#define TEST_LCD_V_RES                          (360)
+#define TEST_LCD_BIT_PER_PIXEL                  (24)
+#define TEST_PIN_NUM_BK_LIGHT                   (-1)    // set to -1 if not used
+#define TEST_LCD_BK_LIGHT_ON_LEVEL              (1)
+#define TEST_LCD_BK_LIGHT_OFF_LEVEL             !TEST_LCD_BK_LIGHT_ON_LEVEL
+
+#define TEST_PIN_NUM_LCD_RST                    (GPIO_NUM_NC)
+
+#if TEST_LCD_BIT_PER_PIXEL == 24
+#define TEST_MIPI_DPI_PX_FORMAT                 (LCD_COLOR_PIXEL_FORMAT_RGB888)
+#elif TEST_LCD_BIT_PER_PIXEL == 18
+#define TEST_MIPI_DPI_PX_FORMAT                 (LCD_COLOR_PIXEL_FORMAT_RGB666)
+#elif TEST_LCD_BIT_PER_PIXEL == 16
+#define TEST_MIPI_DPI_PX_FORMAT                 (LCD_COLOR_PIXEL_FORMAT_RGB565)
+#endif
+
+#define TEST_MIPI_DSI_PHY_PWR_LDO_CHAN          (3)
+#define TEST_MIPI_DSI_PHY_PWR_LDO_VOLTAGE_MV    (2500)
+
+#define TEST_DELAY_TIME_MS                      (3000)
+
+static char *TAG = "st77916_mipi_test";
+
+static esp_ldo_channel_handle_t ldo_mipi_phy = NULL;
+static esp_lcd_panel_handle_t panel_handle = NULL;
+static esp_lcd_dsi_bus_handle_t mipi_dsi_bus = NULL;
+static esp_lcd_panel_io_handle_t mipi_dbi_io = NULL;
+static SemaphoreHandle_t refresh_finish = NULL;
+
+IRAM_ATTR static bool test_notify_refresh_ready(esp_lcd_panel_handle_t panel, esp_lcd_dpi_panel_event_data_t *edata, void *user_ctx)
+{
+    SemaphoreHandle_t refresh_finish = (SemaphoreHandle_t)user_ctx;
+    BaseType_t need_yield = pdFALSE;
+
+    xSemaphoreGiveFromISR(refresh_finish, &need_yield);
+
+    return (need_yield == pdTRUE);
+}
+
+static void test_init_lcd(void)
+{
+#if TEST_PIN_NUM_BK_LIGHT >= 0
+    ESP_LOGI(TAG, "Turn on LCD backlight");
+    gpio_config_t bk_gpio_config = {
+        .mode = GPIO_MODE_OUTPUT,
+        .pin_bit_mask = 1ULL << TEST_PIN_NUM_BK_LIGHT
+    };
+    TEST_ESP_OK(gpio_config(&bk_gpio_config));
+    TEST_ESP_OK(gpio_set_level(TEST_PIN_NUM_BK_LIGHT, TEST_LCD_BK_LIGHT_ON_LEVEL));
+#endif
+
+    // Turn on the power for MIPI DSI PHY, so it can go from "No Power" state to "Shutdown" state
+#ifdef TEST_MIPI_DSI_PHY_PWR_LDO_CHAN
+    ESP_LOGI(TAG, "MIPI DSI PHY Powered on");
+    esp_ldo_channel_config_t ldo_mipi_phy_config = {
+        .chan_id = TEST_MIPI_DSI_PHY_PWR_LDO_CHAN,
+        .voltage_mv = TEST_MIPI_DSI_PHY_PWR_LDO_VOLTAGE_MV,
+    };
+    TEST_ESP_OK(esp_ldo_acquire_channel(&ldo_mipi_phy_config, &ldo_mipi_phy));
+#endif
+
+    ESP_LOGI(TAG, "Initialize MIPI DSI bus");
+    esp_lcd_dsi_bus_config_t bus_config = ST77916_PANEL_BUS_DSI_1CH_CONFIG();
+    TEST_ESP_OK(esp_lcd_new_dsi_bus(&bus_config, &mipi_dsi_bus));
+
+    ESP_LOGI(TAG, "Install panel IO");
+    esp_lcd_dbi_io_config_t dbi_config = ST77916_PANEL_IO_DBI_CONFIG();
+    TEST_ESP_OK(esp_lcd_new_panel_io_dbi(mipi_dsi_bus, &dbi_config, &mipi_dbi_io));
+
+    ESP_LOGI(TAG, "Install LCD driver of st77916");
+    esp_lcd_dpi_panel_config_t dpi_config = ST77916_360_360_PANEL_60HZ_DPI_CONFIG(TEST_MIPI_DPI_PX_FORMAT);
+    st77916_vendor_config_t vendor_config = {
+        .flags.use_mipi_interface = 1,
+        .mipi_config = {
+            .dsi_bus = mipi_dsi_bus,
+            .dpi_config = &dpi_config,
+        },
+    };
+    const esp_lcd_panel_dev_config_t panel_config = {
+        .reset_gpio_num = TEST_PIN_NUM_LCD_RST,
+        .rgb_ele_order = LCD_RGB_ELEMENT_ORDER_RGB,
+        .bits_per_pixel = TEST_LCD_BIT_PER_PIXEL,
+        .vendor_config = &vendor_config,
+    };
+    TEST_ESP_OK(esp_lcd_new_panel_st77916(mipi_dbi_io, &panel_config, &panel_handle));
+    TEST_ESP_OK(esp_lcd_panel_reset(panel_handle));
+    TEST_ESP_OK(esp_lcd_panel_init(panel_handle));
+    TEST_ESP_OK(esp_lcd_panel_disp_on_off(panel_handle, true));
+
+    refresh_finish = xSemaphoreCreateBinary();
+    TEST_ASSERT_NOT_NULL(refresh_finish);
+    esp_lcd_dpi_panel_event_callbacks_t cbs = {
+        .on_color_trans_done = test_notify_refresh_ready,
+    };
+    TEST_ESP_OK(esp_lcd_dpi_panel_register_event_callbacks(panel_handle, &cbs, refresh_finish));
+}
+
+static void test_deinit_lcd(void)
+{
+    TEST_ESP_OK(esp_lcd_panel_del(panel_handle));
+    TEST_ESP_OK(esp_lcd_panel_io_del(mipi_dbi_io));
+    TEST_ESP_OK(esp_lcd_del_dsi_bus(mipi_dsi_bus));
+    panel_handle = NULL;
+    mipi_dbi_io = NULL;
+    mipi_dsi_bus = NULL;
+
+    if (ldo_mipi_phy) {
+        TEST_ESP_OK(esp_ldo_release_channel(ldo_mipi_phy));
+        ldo_mipi_phy = NULL;
+    }
+
+    vSemaphoreDelete(refresh_finish);
+    refresh_finish = NULL;
+
+#if TEST_PIN_NUM_BK_LIGHT >= 0
+    TEST_ESP_OK(gpio_reset_pin(TEST_PIN_NUM_BK_LIGHT));
+#endif
+}
+
+static void test_draw_color_bar(esp_lcd_panel_handle_t panel_handle, uint16_t h_res, uint16_t v_res)
+{
+    uint8_t byte_per_pixel = (TEST_LCD_BIT_PER_PIXEL + 7) / 8;
+    uint16_t row_line = v_res / byte_per_pixel / 8;
+    uint8_t *color = (uint8_t *)heap_caps_calloc(1, row_line * h_res * byte_per_pixel, MALLOC_CAP_DMA);
+
+    for (int j = 0; j < byte_per_pixel * 8; j++) {
+        for (int i = 0; i < row_line * h_res; i++) {
+            for (int k = 0; k < byte_per_pixel; k++) {
+                color[i * byte_per_pixel + k] = (BIT(j) >> (k * 8)) & 0xff;
+            }
+        }
+        TEST_ESP_OK(esp_lcd_panel_draw_bitmap(panel_handle, 0, j * row_line, h_res, (j + 1) * row_line, color));
+        xSemaphoreTake(refresh_finish, portMAX_DELAY);
+    }
+
+    uint16_t color_line = row_line * byte_per_pixel * 8;
+    uint16_t res_line = v_res - color_line;
+    if (res_line) {
+        for (int i = 0; i < res_line * h_res; i++) {
+            for (int k = 0; k < byte_per_pixel; k++) {
+                color[i * byte_per_pixel + k] = 0xff;
+            }
+        }
+        TEST_ESP_OK(esp_lcd_panel_draw_bitmap(panel_handle, 0, color_line, h_res, v_res, color));
+        xSemaphoreTake(refresh_finish, portMAX_DELAY);
+    }
+
+    free(color);
+}
+
+TEST_CASE("test st77916 to draw pattern with MIPI interface", "[st77916][draw_pattern]")
+{
+    ESP_LOGI(TAG, "Initialize LCD device");
+    test_init_lcd();
+
+    ESP_LOGI(TAG, "Show color bar pattern drawn by hardware");
+    TEST_ESP_OK(esp_lcd_dpi_panel_set_pattern(panel_handle, MIPI_DSI_PATTERN_BAR_VERTICAL));
+    vTaskDelay(pdMS_TO_TICKS(TEST_DELAY_TIME_MS));
+    TEST_ESP_OK(esp_lcd_dpi_panel_set_pattern(panel_handle, MIPI_DSI_PATTERN_BAR_HORIZONTAL));
+    vTaskDelay(pdMS_TO_TICKS(TEST_DELAY_TIME_MS));
+    TEST_ESP_OK(esp_lcd_dpi_panel_set_pattern(panel_handle, MIPI_DSI_PATTERN_NONE));
+
+    ESP_LOGI(TAG, "Deinitialize LCD device");
+    test_deinit_lcd();
+}
+
+TEST_CASE("test st77916 to draw color bar with MIPI interface", "[st77916][draw_color_bar]")
+{
+    ESP_LOGI(TAG, "Initialize LCD device");
+    test_init_lcd();
+
+    ESP_LOGI(TAG, "Show color bar drawn by software");
+    test_draw_color_bar(panel_handle, TEST_LCD_H_RES, TEST_LCD_V_RES);
+    vTaskDelay(pdMS_TO_TICKS(TEST_DELAY_TIME_MS));
+
+    ESP_LOGI(TAG, "Deinitialize LCD device");
+    test_deinit_lcd();
+}
+
+TEST_CASE("test st77916 to rotate with MIPI interface", "[st77916][mipi-rotate]")
+{
+    esp_err_t ret = ESP_OK;
+
+    uint16_t w = 0;
+    uint16_t h = 0;
+    int64_t t = 0;
+
+    ESP_LOGI(TAG, "Initialize LCD device");
+    test_init_lcd();
+
+    ESP_LOGI(TAG, "Rotate the screen");
+    for (size_t i = 0; i < 8; i++) {
+        if (ret != ESP_ERR_NOT_SUPPORTED) {
+            if (i & 4) {
+                w = TEST_LCD_V_RES;
+                h = TEST_LCD_H_RES;
+            } else {
+                w = TEST_LCD_H_RES;
+                h = TEST_LCD_V_RES;
+            }
+        }
+
+        TEST_ASSERT_NOT_EQUAL(esp_lcd_panel_mirror(panel_handle, i & 2, i & 1), ESP_FAIL);
+        ret = esp_lcd_panel_swap_xy(panel_handle, i & 4);
+        TEST_ASSERT_NOT_EQUAL(ret, ESP_FAIL);
+
+        ESP_LOGI(TAG, "Rotation: %d", i);
+        t = esp_timer_get_time();
+        test_draw_color_bar(panel_handle, w, h);
+        t = esp_timer_get_time() - t;
+        ESP_LOGI(TAG, "@resolution %dx%d time per frame=%.2fMS\r\n", w, h, (float)t / 1000.0f);
+        vTaskDelay(pdMS_TO_TICKS(1000));
+    }
+
+    ESP_LOGI(TAG, "Deinitialize LCD device");
+    test_deinit_lcd();
+}
+#endif
diff --git a/managed_components/espressif__esp_lcd_st77916/test_apps/main/test_esp_lcd_st77916.c b/managed_components/espressif__esp_lcd_st77916/test_apps/main/test_esp_lcd_st77916_spi.c
similarity index 79%
rename from managed_components/espressif__esp_lcd_st77916/test_apps/main/test_esp_lcd_st77916.c
rename to managed_components/espressif__esp_lcd_st77916/test_apps/main/test_esp_lcd_st77916_spi.c
index c54ce6b..67dd9f9 100644
--- a/managed_components/espressif__esp_lcd_st77916/test_apps/main/test_esp_lcd_st77916.c
+++ b/managed_components/espressif__esp_lcd_st77916/test_apps/main/test_esp_lcd_st77916_spi.c
@@ -141,47 +141,3 @@ TEST_CASE("test st77916 to draw color bar with QSPI interface", "[st77916][qspi]
     TEST_ESP_OK(esp_lcd_panel_io_del(io_handle));
     TEST_ESP_OK(spi_bus_free(TEST_LCD_HOST));
 }
-
-// Some resources are lazy allocated in the LCD driver, the threadhold is left for that case
-#define TEST_MEMORY_LEAK_THRESHOLD  (-300)
-
-static size_t before_free_8bit;
-static size_t before_free_32bit;
-
-static void check_leak(size_t before_free, size_t after_free, const char *type)
-{
-    ssize_t delta = after_free - before_free;
-    printf("MALLOC_CAP_%s: Before %u bytes free, After %u bytes free (delta %d)\n", type, before_free, after_free, delta);
-    TEST_ASSERT_MESSAGE(delta >= TEST_MEMORY_LEAK_THRESHOLD, "memory leak");
-}
-
-void setUp(void)
-{
-    before_free_8bit = heap_caps_get_free_size(MALLOC_CAP_8BIT);
-    before_free_32bit = heap_caps_get_free_size(MALLOC_CAP_32BIT);
-}
-
-void tearDown(void)
-{
-    size_t after_free_8bit = heap_caps_get_free_size(MALLOC_CAP_8BIT);
-    size_t after_free_32bit = heap_caps_get_free_size(MALLOC_CAP_32BIT);
-    check_leak(before_free_8bit, after_free_8bit, "8BIT");
-    check_leak(before_free_32bit, after_free_32bit, "32BIT");
-}
-
-void app_main(void)
-{
-    /**
-     *  __  _____ _____ _____ ___  _  __
-     * / _\/__   \___  |___  / _ \/ |/ /_
-     * \ \   / /\/  / /   / / (_) | | '_ \
-     * _\ \ / /    / /   / / \__, | | (_) |
-     * \__/ \/    /_/   /_/    /_/|_|\___/
-     */
-    printf("  __  _____ _____ _____ ___  _  __\r\n");
-    printf(" / _\\/__   \\___  |___  / _ \\/ |/ /\r\n");
-    printf(" \\ \\   / /\\/  / /   / / (_) | | '_ \r\n");
-    printf(" _\\ \\ / /    / /   / / \\__, | | (_) |\r\n");
-    printf(" \\__/ \\/    /_/   /_/    /_/|_|\\___/\r\n");
-    unity_run_menu();
-}
diff --git a/managed_components/espressif__esp_lcd_st77916/test_apps/sdkconfig.defaults.esp32p4 b/managed_components/espressif__esp_lcd_st77916/test_apps/sdkconfig.defaults.esp32p4
new file mode 100644
index 0000000..bd2170a
--- /dev/null
+++ b/managed_components/espressif__esp_lcd_st77916/test_apps/sdkconfig.defaults.esp32p4
@@ -0,0 +1,9 @@
+CONFIG_IDF_TARGET="esp32p4"
+CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
+CONFIG_COMPILER_OPTIMIZATION_PERF=y
+CONFIG_SPIRAM=y
+CONFIG_SPIRAM_SPEED_200M=y
+CONFIG_ESP_TASK_WDT_EN=n
+CONFIG_FREERTOS_HZ=1000
+CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=4096
+CONFIG_IDF_EXPERIMENTAL_FEATURES=y
diff --git a/managed_components/espressif__esp_lcd_st77916/test_apps/sdkconfig.defaults.esp32s3 b/managed_components/espressif__esp_lcd_st77916/test_apps/sdkconfig.defaults.esp32s3
new file mode 100644
index 0000000..27f6b1d
--- /dev/null
+++ b/managed_components/espressif__esp_lcd_st77916/test_apps/sdkconfig.defaults.esp32s3
@@ -0,0 +1,8 @@
+CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
+CONFIG_COMPILER_OPTIMIZATION_PERF=y
+CONFIG_SPIRAM=y
+CONFIG_SPIRAM_MODE_OCT=y
+CONFIG_SPIRAM_FETCH_INSTRUCTIONS=y
+CONFIG_SPIRAM_RODATA=y
+CONFIG_SPIRAM_SPEED_80M=y
+CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_240=y
diff --git a/managed_components/espressif__esp_lcd_touch_cst816s/CHECKSUMS.json b/managed_components/espressif__esp_lcd_touch_cst816s/CHECKSUMS.json
new file mode 100644
index 0000000..f26fdcd
--- /dev/null
+++ b/managed_components/espressif__esp_lcd_touch_cst816s/CHECKSUMS.json
@@ -0,0 +1 @@
+{"version": "1.0", "algorithm": "sha256", "created_at": "2025-07-15T10:57:47.123029+00:00", "files": [{"path": "CMakeLists.txt", "size": 97, "hash": "d4040e28d59a678c38fb13f6ff29881cb38f9d2fac05fd4b8aed03217a5c7c8c"}, {"path": "Kconfig", "size": 264, "hash": "761b9f2ac330cba6f0c20e468fccf9b9102ad6850662ae1ca275a96e8618614f"}, {"path": "README.md", "size": 3649, "hash": "5148d990b8ae99f98c658f11c78ce45895d4ff15ea36215a54fd82f4bab124f9"}, {"path": "esp_lcd_touch_cst816s.c", "size": 6287, "hash": "01b3594c722b1fe6f05d254b081d6a4e8014d56b0f0e06c58d298d4fa882ce0c"}, {"path": "idf_component.yml", "size": 310, "hash": "db2bba3e94b118082f0dbcef98a8d29acef18a93d24c4a414661679ab5e0c431"}, {"path": "license.txt", "size": 11358, "hash": "cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30"}, {"path": "include/esp_lcd_touch_cst816s.h", "size": 2783, "hash": "04963086236fcd655e8181a98cfa30a9aabf1b5ae6ad6917c7b91f8dcf819857"}, {"path": "test_apps/CMakeLists.txt", "size": 323, "hash": "b9ab8ef50938023920a2c970fa71ca85db6a15f7929007f7f10a84402ceee2b8"}, {"path": "test_apps/sdkconfig.defaults", "size": 49, "hash": "dccb276c3ef85f8f4d6c32edf7c8b582cf2d416f42950b778d7af95a9808e7d4"}, {"path": "test_apps/main/CMakeLists.txt", "size": 60, "hash": "f593b1ac477df2a76bb8c338660adcbd45e1f0f7e0bd8ddc135a566e39d1f62d"}, {"path": "test_apps/main/idf_component.yml", "size": 162, "hash": "ef2ce20977812a320b63bf45f407c4d8b24a679f92adb85fd4db574ef115995b"}, {"path": "test_apps/main/test_esp_lcd_touch_cst816s.c", "size": 2080, "hash": "040124f0040988334ae7d40709c3747304e1538d3f8a8e48cbf45cc8121d2be1"}]}
\ No newline at end of file
diff --git a/managed_components/espressif__esp_lcd_touch_cst816s/esp_lcd_touch_cst816s.c b/managed_components/espressif__esp_lcd_touch_cst816s/esp_lcd_touch_cst816s.c
index d4ba11b..d363529 100644
--- a/managed_components/espressif__esp_lcd_touch_cst816s/esp_lcd_touch_cst816s.c
+++ b/managed_components/espressif__esp_lcd_touch_cst816s/esp_lcd_touch_cst816s.c
@@ -166,9 +166,9 @@ static esp_err_t reset(esp_lcd_touch_handle_t tp)
 {
     if (tp->config.rst_gpio_num != GPIO_NUM_NC) {
         ESP_RETURN_ON_ERROR(gpio_set_level(tp->config.rst_gpio_num, tp->config.levels.reset), TAG, "GPIO set level failed");
-        vTaskDelay(pdMS_TO_TICKS(10));  // 优化：200ms → 10ms
+        vTaskDelay(pdMS_TO_TICKS(200));
         ESP_RETURN_ON_ERROR(gpio_set_level(tp->config.rst_gpio_num, !tp->config.levels.reset), TAG, "GPIO set level failed");
-        vTaskDelay(pdMS_TO_TICKS(30));  // 优化：200ms → 30ms
+        vTaskDelay(pdMS_TO_TICKS(200));
     }
 
     return ESP_OK;
diff --git a/managed_components/espressif__esp_lcd_touch_cst816s/include/esp_lcd_touch_cst816s.h b/managed_components/espressif__esp_lcd_touch_cst816s/include/esp_lcd_touch_cst816s.h
index e4179d7..36d990a 100644
--- a/managed_components/espressif__esp_lcd_touch_cst816s/include/esp_lcd_touch_cst816s.h
+++ b/managed_components/espressif__esp_lcd_touch_cst816s/include/esp_lcd_touch_cst816s.h
@@ -72,6 +72,7 @@ esp_err_t esp_lcd_touch_new_i2c_cst816s(const esp_lcd_panel_io_handle_t io, cons
             .dc_low_on_data = 0,                          \
             .disable_control_phase = 1,                   \
         },                                                \
+        .scl_speed_hz = 100000                            \
     }
 #endif
 
diff --git a/managed_components/espressif__esp_lvgl_port/src/lvgl8/esp_lvgl_port_touch.c b/managed_components/espressif__esp_lvgl_port/src/lvgl8/esp_lvgl_port_touch.c
index d53898e..aea1221 100644
--- a/managed_components/espressif__esp_lvgl_port/src/lvgl8/esp_lvgl_port_touch.c
+++ b/managed_components/espressif__esp_lvgl_port/src/lvgl8/esp_lvgl_port_touch.c
@@ -95,9 +95,7 @@ static void lvgl_port_touchpad_read(lv_indev_drv_t *indev_drv, lv_indev_data_t *
         data->point.x = touchpad_x[0];
         data->point.y = touchpad_y[0];
         data->state = LV_INDEV_STATE_PRESSED;
-        ESP_LOGI(TAG, "Touch detected: x=%d, y=%d, count=%d", touchpad_x[0], touchpad_y[0], touchpad_cnt);
     } else {
         data->state = LV_INDEV_STATE_RELEASED;
-        // ESP_LOGI(TAG, "Touch released");
     }
 }
diff --git a/managed_components/lvgl__lvgl/src/hal/lv_hal_indev.h b/managed_components/lvgl__lvgl/src/hal/lv_hal_indev.h
index 517fb13..5bbcf53 100644
--- a/managed_components/lvgl__lvgl/src/hal/lv_hal_indev.h
+++ b/managed_components/lvgl__lvgl/src/hal/lv_hal_indev.h
@@ -41,11 +41,10 @@ extern "C" {
 #define LV_INDEV_DEF_LONG_PRESS_REP_TIME  100
 
 
+/*Gesture threshold in pixels*/
+#define LV_INDEV_DEF_GESTURE_LIMIT        50
 
-/*手势阈值（像素）*/
-#define LV_INDEV_DEF_GESTURE_LIMIT        20
-
-/*滑动前释放时的手势最小速度（像素）*/
+/*Gesture min velocity at release before swipe (pixels)*/
 #define LV_INDEV_DEF_GESTURE_MIN_VELOCITY 3
 
 
diff --git a/sdkconfig b/sdkconfig
index 023258b..06d0a6a 100644
--- a/sdkconfig
+++ b/sdkconfig
@@ -2,40 +2,26 @@
 # Automatically generated file. DO NOT EDIT.
 # Espressif IoT Development Framework (ESP-IDF) 5.4.2 Project Configuration
 #
-CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000
-CONFIG_SOC_MPU_REGIONS_MAX_NUM=8
 CONFIG_SOC_ADC_SUPPORTED=y
+CONFIG_SOC_DEDICATED_GPIO_SUPPORTED=y
 CONFIG_SOC_UART_SUPPORTED=y
-CONFIG_SOC_PCNT_SUPPORTED=y
-CONFIG_SOC_PHY_SUPPORTED=y
-CONFIG_SOC_WIFI_SUPPORTED=y
-CONFIG_SOC_TWAI_SUPPORTED=y
 CONFIG_SOC_GDMA_SUPPORTED=y
 CONFIG_SOC_AHB_GDMA_SUPPORTED=y
 CONFIG_SOC_GPTIMER_SUPPORTED=y
-CONFIG_SOC_LCDCAM_SUPPORTED=y
-CONFIG_SOC_LCDCAM_I80_LCD_SUPPORTED=y
-CONFIG_SOC_LCDCAM_RGB_LCD_SUPPORTED=y
-CONFIG_SOC_MCPWM_SUPPORTED=y
-CONFIG_SOC_DEDICATED_GPIO_SUPPORTED=y
-CONFIG_SOC_CACHE_SUPPORT_WRAP=y
-CONFIG_SOC_ULP_SUPPORTED=y
-CONFIG_SOC_ULP_FSM_SUPPORTED=y
-CONFIG_SOC_RISCV_COPROC_SUPPORTED=y
+CONFIG_SOC_TWAI_SUPPORTED=y
 CONFIG_SOC_BT_SUPPORTED=y
-CONFIG_SOC_USB_OTG_SUPPORTED=y
-CONFIG_SOC_USB_SERIAL_JTAG_SUPPORTED=y
-CONFIG_SOC_CCOMP_TIMER_SUPPORTED=y
 CONFIG_SOC_ASYNC_MEMCPY_SUPPORTED=y
+CONFIG_SOC_USB_SERIAL_JTAG_SUPPORTED=y
+CONFIG_SOC_TEMP_SENSOR_SUPPORTED=y
+CONFIG_SOC_XT_WDT_SUPPORTED=y
+CONFIG_SOC_PHY_SUPPORTED=y
+CONFIG_SOC_WIFI_SUPPORTED=y
 CONFIG_SOC_SUPPORTS_SECURE_DL_MODE=y
 CONFIG_SOC_EFUSE_KEY_PURPOSE_FIELD=y
+CONFIG_SOC_EFUSE_HAS_EFUSE_RST_BUG=y
 CONFIG_SOC_EFUSE_SUPPORTED=y
-CONFIG_SOC_SDMMC_HOST_SUPPORTED=y
 CONFIG_SOC_RTC_FAST_MEM_SUPPORTED=y
-CONFIG_SOC_RTC_SLOW_MEM_SUPPORTED=y
 CONFIG_SOC_RTC_MEM_SUPPORTED=y
-CONFIG_SOC_PSRAM_DMA_CAPABLE=y
-CONFIG_SOC_XT_WDT_SUPPORTED=y
 CONFIG_SOC_I2S_SUPPORTED=y
 CONFIG_SOC_RMT_SUPPORTED=y
 CONFIG_SOC_SDM_SUPPORTED=y
@@ -44,7 +30,6 @@ CONFIG_SOC_LEDC_SUPPORTED=y
 CONFIG_SOC_I2C_SUPPORTED=y
 CONFIG_SOC_SYSTIMER_SUPPORTED=y
 CONFIG_SOC_SUPPORT_COEXISTENCE=y
-CONFIG_SOC_TEMP_SENSOR_SUPPORTED=y
 CONFIG_SOC_AES_SUPPORTED=y
 CONFIG_SOC_MPI_SUPPORTED=y
 CONFIG_SOC_SHA_SUPPORTED=y
@@ -53,10 +38,9 @@ CONFIG_SOC_DIG_SIGN_SUPPORTED=y
 CONFIG_SOC_FLASH_ENC_SUPPORTED=y
 CONFIG_SOC_SECURE_BOOT_SUPPORTED=y
 CONFIG_SOC_MEMPROT_SUPPORTED=y
-CONFIG_SOC_TOUCH_SENSOR_SUPPORTED=y
 CONFIG_SOC_BOD_SUPPORTED=y
 CONFIG_SOC_CLK_TREE_SUPPORTED=y
-CONFIG_SOC_MPU_SUPPORTED=y
+CONFIG_SOC_ASSIST_DEBUG_SUPPORTED=y
 CONFIG_SOC_WDT_SUPPORTED=y
 CONFIG_SOC_SPI_FLASH_SUPPORTED=y
 CONFIG_SOC_RNG_SUPPORTED=y
@@ -64,20 +48,21 @@ CONFIG_SOC_LIGHT_SLEEP_SUPPORTED=y
 CONFIG_SOC_DEEP_SLEEP_SUPPORTED=y
 CONFIG_SOC_LP_PERIPH_SHARE_INTERRUPT=y
 CONFIG_SOC_PM_SUPPORTED=y
-CONFIG_SOC_SIMD_INSTRUCTION_SUPPORTED=y
 CONFIG_SOC_XTAL_SUPPORT_40M=y
-CONFIG_SOC_APPCPU_HAS_CLOCK_GATING_BUG=y
-CONFIG_SOC_ADC_RTC_CTRL_SUPPORTED=y
+CONFIG_SOC_AES_SUPPORT_DMA=y
+CONFIG_SOC_AES_GDMA=y
+CONFIG_SOC_AES_SUPPORT_AES_128=y
+CONFIG_SOC_AES_SUPPORT_AES_256=y
 CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED=y
 CONFIG_SOC_ADC_ARBITER_SUPPORTED=y
 CONFIG_SOC_ADC_DIG_IIR_FILTER_SUPPORTED=y
 CONFIG_SOC_ADC_MONITOR_SUPPORTED=y
 CONFIG_SOC_ADC_DMA_SUPPORTED=y
 CONFIG_SOC_ADC_PERIPH_NUM=2
-CONFIG_SOC_ADC_MAX_CHANNEL_NUM=10
+CONFIG_SOC_ADC_MAX_CHANNEL_NUM=5
 CONFIG_SOC_ADC_ATTEN_NUM=4
-CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM=2
-CONFIG_SOC_ADC_PATT_LEN_MAX=24
+CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM=1
+CONFIG_SOC_ADC_PATT_LEN_MAX=8
 CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH=12
 CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH=12
 CONFIG_SOC_ADC_DIGI_RESULT_BYTES=4
@@ -93,42 +78,40 @@ CONFIG_SOC_ADC_SELF_HW_CALI_SUPPORTED=y
 CONFIG_SOC_ADC_SHARED_POWER=y
 CONFIG_SOC_APB_BACKUP_DMA=y
 CONFIG_SOC_BROWNOUT_RESET_SUPPORTED=y
-CONFIG_SOC_CACHE_WRITEBACK_SUPPORTED=y
-CONFIG_SOC_CACHE_FREEZE_SUPPORTED=y
-CONFIG_SOC_CPU_CORES_NUM=2
+CONFIG_SOC_SHARED_IDCACHE_SUPPORTED=y
+CONFIG_SOC_CACHE_MEMORY_IBANK_SIZE=0x4000
+CONFIG_SOC_CPU_CORES_NUM=1
 CONFIG_SOC_CPU_INTR_NUM=32
-CONFIG_SOC_CPU_HAS_FPU=y
-CONFIG_SOC_HP_CPU_HAS_MULTIPLE_CORES=y
-CONFIG_SOC_CPU_BREAKPOINTS_NUM=2
-CONFIG_SOC_CPU_WATCHPOINTS_NUM=2
-CONFIG_SOC_CPU_WATCHPOINT_MAX_REGION_SIZE=64
-CONFIG_SOC_SIMD_PREFERRED_DATA_ALIGNMENT=16
-CONFIG_SOC_DS_SIGNATURE_MAX_BIT_LEN=4096
+CONFIG_SOC_CPU_HAS_FLEXIBLE_INTC=y
+CONFIG_SOC_CPU_HAS_CSR_PC=y
+CONFIG_SOC_CPU_BREAKPOINTS_NUM=8
+CONFIG_SOC_CPU_WATCHPOINTS_NUM=8
+CONFIG_SOC_CPU_WATCHPOINT_MAX_REGION_SIZE=0x80000000
+CONFIG_SOC_DS_SIGNATURE_MAX_BIT_LEN=3072
 CONFIG_SOC_DS_KEY_PARAM_MD_IV_LENGTH=16
 CONFIG_SOC_DS_KEY_CHECK_MAX_WAIT_US=1100
 CONFIG_SOC_AHB_GDMA_VERSION=1
 CONFIG_SOC_GDMA_NUM_GROUPS_MAX=1
-CONFIG_SOC_GDMA_PAIRS_PER_GROUP=5
-CONFIG_SOC_GDMA_PAIRS_PER_GROUP_MAX=5
-CONFIG_SOC_AHB_GDMA_SUPPORT_PSRAM=y
+CONFIG_SOC_GDMA_PAIRS_PER_GROUP_MAX=3
 CONFIG_SOC_GPIO_PORT=1
-CONFIG_SOC_GPIO_PIN_COUNT=49
+CONFIG_SOC_GPIO_PIN_COUNT=22
 CONFIG_SOC_GPIO_SUPPORT_PIN_GLITCH_FILTER=y
 CONFIG_SOC_GPIO_FILTER_CLK_SUPPORT_APB=y
-CONFIG_SOC_GPIO_SUPPORT_RTC_INDEPENDENT=y
 CONFIG_SOC_GPIO_SUPPORT_FORCE_HOLD=y
-CONFIG_SOC_GPIO_VALID_GPIO_MASK=0x1FFFFFFFFFFFF
-CONFIG_SOC_GPIO_IN_RANGE_MAX=48
-CONFIG_SOC_GPIO_OUT_RANGE_MAX=48
-CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK=0x0001FFFFFC000000
-CONFIG_SOC_GPIO_CLOCKOUT_BY_IO_MUX=y
+CONFIG_SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP=y
+CONFIG_SOC_GPIO_IN_RANGE_MAX=21
+CONFIG_SOC_GPIO_OUT_RANGE_MAX=21
+CONFIG_SOC_GPIO_DEEP_SLEEP_WAKE_VALID_GPIO_MASK=0
+CONFIG_SOC_GPIO_DEEP_SLEEP_WAKE_SUPPORTED_PIN_CNT=6
+CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK=0x00000000003FFFC0
+CONFIG_SOC_GPIO_CLOCKOUT_BY_GPIO_MATRIX=y
 CONFIG_SOC_GPIO_CLOCKOUT_CHANNEL_NUM=3
 CONFIG_SOC_GPIO_SUPPORT_HOLD_IO_IN_DSLP=y
 CONFIG_SOC_DEDIC_GPIO_OUT_CHANNELS_NUM=8
 CONFIG_SOC_DEDIC_GPIO_IN_CHANNELS_NUM=8
-CONFIG_SOC_DEDIC_GPIO_OUT_AUTO_ENABLE=y
-CONFIG_SOC_I2C_NUM=2
-CONFIG_SOC_HP_I2C_NUM=2
+CONFIG_SOC_DEDIC_PERIPH_ALWAYS_ENABLE=y
+CONFIG_SOC_I2C_NUM=1
+CONFIG_SOC_HP_I2C_NUM=1
 CONFIG_SOC_I2C_FIFO_LEN=32
 CONFIG_SOC_I2C_CMD_REG_NUM=8
 CONFIG_SOC_I2C_SUPPORT_SLAVE=y
@@ -137,9 +120,9 @@ CONFIG_SOC_I2C_SUPPORT_XTAL=y
 CONFIG_SOC_I2C_SUPPORT_RTC=y
 CONFIG_SOC_I2C_SUPPORT_10BIT_ADDR=y
 CONFIG_SOC_I2C_SLAVE_SUPPORT_BROADCAST=y
-CONFIG_SOC_I2C_SLAVE_SUPPORT_I2CRAM_ACCESS=y
 CONFIG_SOC_I2C_SLAVE_CAN_GET_STRETCH_CAUSE=y
-CONFIG_SOC_I2S_NUM=2
+CONFIG_SOC_I2C_SLAVE_SUPPORT_I2CRAM_ACCESS=y
+CONFIG_SOC_I2S_NUM=1
 CONFIG_SOC_I2S_HW_VERSION_2=y
 CONFIG_SOC_I2S_SUPPORTS_XTAL=y
 CONFIG_SOC_I2S_SUPPORTS_PLL_F160M=y
@@ -147,71 +130,50 @@ CONFIG_SOC_I2S_SUPPORTS_PCM=y
 CONFIG_SOC_I2S_SUPPORTS_PDM=y
 CONFIG_SOC_I2S_SUPPORTS_PDM_TX=y
 CONFIG_SOC_I2S_PDM_MAX_TX_LINES=2
-CONFIG_SOC_I2S_SUPPORTS_PDM_RX=y
-CONFIG_SOC_I2S_PDM_MAX_RX_LINES=4
 CONFIG_SOC_I2S_SUPPORTS_TDM=y
 CONFIG_SOC_LEDC_SUPPORT_APB_CLOCK=y
 CONFIG_SOC_LEDC_SUPPORT_XTAL_CLOCK=y
 CONFIG_SOC_LEDC_TIMER_NUM=4
-CONFIG_SOC_LEDC_CHANNEL_NUM=8
+CONFIG_SOC_LEDC_CHANNEL_NUM=6
 CONFIG_SOC_LEDC_TIMER_BIT_WIDTH=14
 CONFIG_SOC_LEDC_SUPPORT_FADE_STOP=y
-CONFIG_SOC_MCPWM_GROUPS=2
-CONFIG_SOC_MCPWM_TIMERS_PER_GROUP=3
-CONFIG_SOC_MCPWM_OPERATORS_PER_GROUP=3
-CONFIG_SOC_MCPWM_COMPARATORS_PER_OPERATOR=2
-CONFIG_SOC_MCPWM_GENERATORS_PER_OPERATOR=2
-CONFIG_SOC_MCPWM_TRIGGERS_PER_OPERATOR=2
-CONFIG_SOC_MCPWM_GPIO_FAULTS_PER_GROUP=3
-CONFIG_SOC_MCPWM_CAPTURE_TIMERS_PER_GROUP=y
-CONFIG_SOC_MCPWM_CAPTURE_CHANNELS_PER_TIMER=3
-CONFIG_SOC_MCPWM_GPIO_SYNCHROS_PER_GROUP=3
-CONFIG_SOC_MCPWM_SWSYNC_CAN_PROPAGATE=y
 CONFIG_SOC_MMU_LINEAR_ADDRESS_REGION_NUM=1
 CONFIG_SOC_MMU_PERIPH_NUM=1
-CONFIG_SOC_PCNT_GROUPS=1
-CONFIG_SOC_PCNT_UNITS_PER_GROUP=4
-CONFIG_SOC_PCNT_CHANNELS_PER_UNIT=2
-CONFIG_SOC_PCNT_THRES_POINT_PER_UNIT=2
+CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000
+CONFIG_SOC_MPU_REGIONS_MAX_NUM=8
 CONFIG_SOC_RMT_GROUPS=1
-CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP=4
-CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP=4
-CONFIG_SOC_RMT_CHANNELS_PER_GROUP=8
+CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP=2
+CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP=2
+CONFIG_SOC_RMT_CHANNELS_PER_GROUP=4
 CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL=48
 CONFIG_SOC_RMT_SUPPORT_RX_PINGPONG=y
 CONFIG_SOC_RMT_SUPPORT_RX_DEMODULATION=y
 CONFIG_SOC_RMT_SUPPORT_TX_ASYNC_STOP=y
 CONFIG_SOC_RMT_SUPPORT_TX_LOOP_COUNT=y
-CONFIG_SOC_RMT_SUPPORT_TX_LOOP_AUTO_STOP=y
 CONFIG_SOC_RMT_SUPPORT_TX_SYNCHRO=y
 CONFIG_SOC_RMT_SUPPORT_TX_CARRIER_DATA_ONLY=y
 CONFIG_SOC_RMT_SUPPORT_XTAL=y
-CONFIG_SOC_RMT_SUPPORT_RC_FAST=y
 CONFIG_SOC_RMT_SUPPORT_APB=y
-CONFIG_SOC_RMT_SUPPORT_DMA=y
-CONFIG_SOC_LCD_I80_SUPPORTED=y
-CONFIG_SOC_LCD_RGB_SUPPORTED=y
-CONFIG_SOC_LCD_I80_BUSES=1
-CONFIG_SOC_LCD_RGB_PANELS=1
-CONFIG_SOC_LCD_I80_BUS_WIDTH=16
-CONFIG_SOC_LCD_RGB_DATA_WIDTH=16
-CONFIG_SOC_LCD_SUPPORT_RGB_YUV_CONV=y
-CONFIG_SOC_LCDCAM_I80_NUM_BUSES=1
-CONFIG_SOC_LCDCAM_I80_BUS_WIDTH=16
-CONFIG_SOC_LCDCAM_RGB_NUM_PANELS=1
-CONFIG_SOC_LCDCAM_RGB_DATA_WIDTH=16
+CONFIG_SOC_RMT_SUPPORT_RC_FAST=y
 CONFIG_SOC_RTC_CNTL_CPU_PD_DMA_BUS_WIDTH=128
-CONFIG_SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM=549
-CONFIG_SOC_RTC_CNTL_TAGMEM_PD_DMA_BUS_WIDTH=128
-CONFIG_SOC_RTCIO_PIN_COUNT=22
-CONFIG_SOC_RTCIO_INPUT_OUTPUT_SUPPORTED=y
-CONFIG_SOC_RTCIO_HOLD_SUPPORTED=y
-CONFIG_SOC_RTCIO_WAKE_SUPPORTED=y
-CONFIG_SOC_LP_IO_CLOCK_IS_INDEPENDENT=y
-CONFIG_SOC_SDM_GROUPS=y
-CONFIG_SOC_SDM_CHANNELS_PER_GROUP=8
+CONFIG_SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM=108
+CONFIG_SOC_SLEEP_SYSTIMER_STALL_WORKAROUND=y
+CONFIG_SOC_SLEEP_TGWDT_STOP_WORKAROUND=y
+CONFIG_SOC_RTCIO_PIN_COUNT=0
+CONFIG_SOC_MPI_MEM_BLOCKS_NUM=4
+CONFIG_SOC_MPI_OPERATIONS_NUM=3
+CONFIG_SOC_RSA_MAX_BIT_LEN=3072
+CONFIG_SOC_SHA_DMA_MAX_BUFFER_SIZE=3968
+CONFIG_SOC_SHA_SUPPORT_DMA=y
+CONFIG_SOC_SHA_SUPPORT_RESUME=y
+CONFIG_SOC_SHA_GDMA=y
+CONFIG_SOC_SHA_SUPPORT_SHA1=y
+CONFIG_SOC_SHA_SUPPORT_SHA224=y
+CONFIG_SOC_SHA_SUPPORT_SHA256=y
+CONFIG_SOC_SDM_GROUPS=1
+CONFIG_SOC_SDM_CHANNELS_PER_GROUP=4
 CONFIG_SOC_SDM_CLK_SUPPORT_APB=y
-CONFIG_SOC_SPI_PERIPH_NUM=3
+CONFIG_SOC_SPI_PERIPH_NUM=2
 CONFIG_SOC_SPI_MAX_CS_NUM=6
 CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE=64
 CONFIG_SOC_SPI_SUPPORT_DDRCLK=y
@@ -222,19 +184,24 @@ CONFIG_SOC_SPI_SUPPORT_SLAVE_HD_VER2=y
 CONFIG_SOC_SPI_SUPPORT_CLK_APB=y
 CONFIG_SOC_SPI_SUPPORT_CLK_XTAL=y
 CONFIG_SOC_SPI_PERIPH_SUPPORT_CONTROL_DUMMY_OUT=y
-CONFIG_SOC_MEMSPI_IS_INDEPENDENT=y
-CONFIG_SOC_SPI_MAX_PRE_DIVIDER=16
-CONFIG_SOC_SPI_SUPPORT_OCT=y
 CONFIG_SOC_SPI_SCT_SUPPORTED=y
 CONFIG_SOC_SPI_SCT_REG_NUM=14
 CONFIG_SOC_SPI_SCT_BUFFER_NUM_MAX=y
 CONFIG_SOC_SPI_SCT_CONF_BITLEN_MAX=0x3FFFA
-CONFIG_SOC_MEMSPI_SRC_FREQ_120M=y
+CONFIG_SOC_MEMSPI_IS_INDEPENDENT=y
+CONFIG_SOC_SPI_MAX_PRE_DIVIDER=16
+CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_WAIT_IDLE=y
+CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_SUSPEND=y
+CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_RESUME=y
+CONFIG_SOC_SPI_MEM_SUPPORT_IDLE_INTR=y
+CONFIG_SOC_SPI_MEM_SUPPORT_SW_SUSPEND=y
+CONFIG_SOC_SPI_MEM_SUPPORT_CHECK_SUS=y
+CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE=y
+CONFIG_SOC_SPI_MEM_SUPPORT_WRAP=y
 CONFIG_SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED=y
 CONFIG_SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED=y
+CONFIG_SOC_MEMSPI_SRC_FREQ_26M_SUPPORTED=y
 CONFIG_SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED=y
-CONFIG_SOC_SPIRAM_SUPPORTED=y
-CONFIG_SOC_SPIRAM_XIP_SUPPORTED=y
 CONFIG_SOC_SYSTIMER_COUNTER_NUM=2
 CONFIG_SOC_SYSTIMER_ALARM_NUM=3
 CONFIG_SOC_SYSTIMER_BIT_WIDTH_LO=32
@@ -243,70 +210,56 @@ CONFIG_SOC_SYSTIMER_FIXED_DIVIDER=y
 CONFIG_SOC_SYSTIMER_INT_LEVEL=y
 CONFIG_SOC_SYSTIMER_ALARM_MISS_COMPENSATE=y
 CONFIG_SOC_TIMER_GROUPS=2
-CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP=2
+CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP=1
 CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH=54
 CONFIG_SOC_TIMER_GROUP_SUPPORT_XTAL=y
 CONFIG_SOC_TIMER_GROUP_SUPPORT_APB=y
-CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS=4
+CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS=2
 CONFIG_SOC_LP_TIMER_BIT_WIDTH_LO=32
 CONFIG_SOC_LP_TIMER_BIT_WIDTH_HI=16
-CONFIG_SOC_TOUCH_SENSOR_VERSION=2
-CONFIG_SOC_TOUCH_SENSOR_NUM=15
-CONFIG_SOC_TOUCH_SUPPORT_SLEEP_WAKEUP=y
-CONFIG_SOC_TOUCH_SUPPORT_WATERPROOF=y
-CONFIG_SOC_TOUCH_SUPPORT_PROX_SENSING=y
-CONFIG_SOC_TOUCH_PROXIMITY_CHANNEL_NUM=3
-CONFIG_SOC_TOUCH_PROXIMITY_MEAS_DONE_SUPPORTED=y
-CONFIG_SOC_TOUCH_SAMPLE_CFG_NUM=1
+CONFIG_SOC_MWDT_SUPPORT_XTAL=y
 CONFIG_SOC_TWAI_CONTROLLER_NUM=1
 CONFIG_SOC_TWAI_CLK_SUPPORT_APB=y
 CONFIG_SOC_TWAI_BRP_MIN=2
 CONFIG_SOC_TWAI_BRP_MAX=16384
 CONFIG_SOC_TWAI_SUPPORTS_RX_STATUS=y
-CONFIG_SOC_UART_NUM=3
-CONFIG_SOC_UART_HP_NUM=3
+CONFIG_SOC_EFUSE_DIS_DOWNLOAD_ICACHE=y
+CONFIG_SOC_EFUSE_DIS_PAD_JTAG=y
+CONFIG_SOC_EFUSE_DIS_USB_JTAG=y
+CONFIG_SOC_EFUSE_DIS_DIRECT_BOOT=y
+CONFIG_SOC_EFUSE_SOFT_DIS_JTAG=y
+CONFIG_SOC_EFUSE_DIS_ICACHE=y
+CONFIG_SOC_EFUSE_BLOCK9_KEY_PURPOSE_QUIRK=y
+CONFIG_SOC_SECURE_BOOT_V2_RSA=y
+CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS=3
+CONFIG_SOC_EFUSE_REVOKE_BOOT_KEY_DIGESTS=y
+CONFIG_SOC_SUPPORT_SECURE_BOOT_REVOKE_KEY=y
+CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX=32
+CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES=y
+CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_128=y
+CONFIG_SOC_MEMPROT_CPU_PREFETCH_PAD_SIZE=16
+CONFIG_SOC_MEMPROT_MEM_ALIGN_SIZE=512
+CONFIG_SOC_UART_NUM=2
+CONFIG_SOC_UART_HP_NUM=2
 CONFIG_SOC_UART_FIFO_LEN=128
 CONFIG_SOC_UART_BITRATE_MAX=5000000
-CONFIG_SOC_UART_SUPPORT_FSM_TX_WAIT_SEND=y
-CONFIG_SOC_UART_SUPPORT_WAKEUP_INT=y
 CONFIG_SOC_UART_SUPPORT_APB_CLK=y
 CONFIG_SOC_UART_SUPPORT_RTC_CLK=y
 CONFIG_SOC_UART_SUPPORT_XTAL_CLK=y
-CONFIG_SOC_USB_OTG_PERIPH_NUM=1
-CONFIG_SOC_SHA_DMA_MAX_BUFFER_SIZE=3968
-CONFIG_SOC_SHA_SUPPORT_DMA=y
-CONFIG_SOC_SHA_SUPPORT_RESUME=y
-CONFIG_SOC_SHA_GDMA=y
-CONFIG_SOC_SHA_SUPPORT_SHA1=y
-CONFIG_SOC_SHA_SUPPORT_SHA224=y
-CONFIG_SOC_SHA_SUPPORT_SHA256=y
-CONFIG_SOC_SHA_SUPPORT_SHA384=y
-CONFIG_SOC_SHA_SUPPORT_SHA512=y
-CONFIG_SOC_SHA_SUPPORT_SHA512_224=y
-CONFIG_SOC_SHA_SUPPORT_SHA512_256=y
-CONFIG_SOC_SHA_SUPPORT_SHA512_T=y
-CONFIG_SOC_MPI_MEM_BLOCKS_NUM=4
-CONFIG_SOC_MPI_OPERATIONS_NUM=3
-CONFIG_SOC_RSA_MAX_BIT_LEN=4096
-CONFIG_SOC_AES_SUPPORT_DMA=y
-CONFIG_SOC_AES_GDMA=y
-CONFIG_SOC_AES_SUPPORT_AES_128=y
-CONFIG_SOC_AES_SUPPORT_AES_256=y
-CONFIG_SOC_PM_SUPPORT_EXT0_WAKEUP=y
-CONFIG_SOC_PM_SUPPORT_EXT1_WAKEUP=y
-CONFIG_SOC_PM_SUPPORT_EXT_WAKEUP=y
+CONFIG_SOC_UART_SUPPORT_WAKEUP_INT=y
+CONFIG_SOC_UART_SUPPORT_FSM_TX_WAIT_SEND=y
+CONFIG_SOC_COEX_HW_PTI=y
+CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE=21
+CONFIG_SOC_MAC_BB_PD_MEM_SIZE=192
+CONFIG_SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH=12
 CONFIG_SOC_PM_SUPPORT_WIFI_WAKEUP=y
 CONFIG_SOC_PM_SUPPORT_BT_WAKEUP=y
-CONFIG_SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP=y
 CONFIG_SOC_PM_SUPPORT_CPU_PD=y
-CONFIG_SOC_PM_SUPPORT_TAGMEM_PD=y
-CONFIG_SOC_PM_SUPPORT_RTC_PERIPH_PD=y
+CONFIG_SOC_PM_SUPPORT_WIFI_PD=y
+CONFIG_SOC_PM_SUPPORT_BT_PD=y
 CONFIG_SOC_PM_SUPPORT_RC_FAST_PD=y
 CONFIG_SOC_PM_SUPPORT_VDDSDIO_PD=y
 CONFIG_SOC_PM_SUPPORT_MAC_BB_PD=y
-CONFIG_SOC_PM_SUPPORT_MODEM_PD=y
-CONFIG_SOC_CONFIGURABLE_VDDSDIO_SUPPORTED=y
-CONFIG_SOC_PM_SUPPORT_DEEPSLEEP_CHECK_STUB_ONLY=y
 CONFIG_SOC_PM_CPU_RETENTION_BY_RTCCNTL=y
 CONFIG_SOC_PM_MODEM_RETENTION_BY_BACKUPDMA=y
 CONFIG_SOC_PM_MODEM_PD_BY_SW=y
@@ -314,46 +267,8 @@ CONFIG_SOC_CLK_RC_FAST_D256_SUPPORTED=y
 CONFIG_SOC_RTC_SLOW_CLK_SUPPORT_RC_FAST_D256=y
 CONFIG_SOC_CLK_RC_FAST_SUPPORT_CALIBRATION=y
 CONFIG_SOC_CLK_XTAL32K_SUPPORTED=y
-CONFIG_SOC_EFUSE_DIS_DOWNLOAD_ICACHE=y
-CONFIG_SOC_EFUSE_DIS_DOWNLOAD_DCACHE=y
-CONFIG_SOC_EFUSE_HARD_DIS_JTAG=y
-CONFIG_SOC_EFUSE_DIS_USB_JTAG=y
-CONFIG_SOC_EFUSE_SOFT_DIS_JTAG=y
-CONFIG_SOC_EFUSE_DIS_DIRECT_BOOT=y
-CONFIG_SOC_EFUSE_DIS_ICACHE=y
-CONFIG_SOC_EFUSE_BLOCK9_KEY_PURPOSE_QUIRK=y
-CONFIG_SOC_SECURE_BOOT_V2_RSA=y
-CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS=3
-CONFIG_SOC_EFUSE_REVOKE_BOOT_KEY_DIGESTS=y
-CONFIG_SOC_SUPPORT_SECURE_BOOT_REVOKE_KEY=y
-CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX=64
-CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES=y
-CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_OPTIONS=y
-CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_128=y
-CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_256=y
-CONFIG_SOC_MEMPROT_CPU_PREFETCH_PAD_SIZE=16
-CONFIG_SOC_MEMPROT_MEM_ALIGN_SIZE=256
-CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE=21
-CONFIG_SOC_MAC_BB_PD_MEM_SIZE=192
-CONFIG_SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH=12
-CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_WAIT_IDLE=y
-CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_SUSPEND=y
-CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_RESUME=y
-CONFIG_SOC_SPI_MEM_SUPPORT_SW_SUSPEND=y
-CONFIG_SOC_SPI_MEM_SUPPORT_OPI_MODE=y
-CONFIG_SOC_SPI_MEM_SUPPORT_TIMING_TUNING=y
-CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE=y
-CONFIG_SOC_SPI_MEM_SUPPORT_WRAP=y
-CONFIG_SOC_MEMSPI_TIMING_TUNING_BY_MSPI_DELAY=y
-CONFIG_SOC_MEMSPI_CORE_CLK_SHARED_WITH_PSRAM=y
-CONFIG_SOC_SPI_MEM_SUPPORT_CACHE_32BIT_ADDR_MAP=y
-CONFIG_SOC_COEX_HW_PTI=y
-CONFIG_SOC_EXTERNAL_COEX_LEADER_TX_LINE=y
-CONFIG_SOC_SDMMC_USE_GPIO_MATRIX=y
-CONFIG_SOC_SDMMC_NUM_SLOTS=2
-CONFIG_SOC_SDMMC_SUPPORT_XTAL_CLOCK=y
-CONFIG_SOC_SDMMC_DELAY_PHASE_NUM=4
 CONFIG_SOC_TEMPERATURE_SENSOR_SUPPORT_FAST_RC=y
+CONFIG_SOC_TEMPERATURE_SENSOR_SUPPORT_XTAL=y
 CONFIG_SOC_WIFI_HW_TSF=y
 CONFIG_SOC_WIFI_FTM_SUPPORT=y
 CONFIG_SOC_WIFI_GCMP_SUPPORT=y
@@ -367,17 +282,16 @@ CONFIG_SOC_BLE_MESH_SUPPORTED=y
 CONFIG_SOC_BLE_50_SUPPORTED=y
 CONFIG_SOC_BLE_DEVICE_PRIVACY_SUPPORTED=y
 CONFIG_SOC_BLUFI_SUPPORTED=y
-CONFIG_SOC_ULP_HAS_ADC=y
 CONFIG_SOC_PHY_COMBO_MODULE=y
 CONFIG_IDF_CMAKE=y
 CONFIG_IDF_TOOLCHAIN="gcc"
 CONFIG_IDF_TOOLCHAIN_GCC=y
-CONFIG_IDF_TARGET_ARCH_XTENSA=y
-CONFIG_IDF_TARGET_ARCH="xtensa"
-CONFIG_IDF_TARGET="esp32s3"
+CONFIG_IDF_TARGET_ARCH_RISCV=y
+CONFIG_IDF_TARGET_ARCH="riscv"
+CONFIG_IDF_TARGET="esp32c3"
 CONFIG_IDF_INIT_VERSION="5.4.2"
-CONFIG_IDF_TARGET_ESP32S3=y
-CONFIG_IDF_FIRMWARE_CHIP_ID=0x0009
+CONFIG_IDF_TARGET_ESP32C3=y
+CONFIG_IDF_FIRMWARE_CHIP_ID=0x0005
 
 #
 # Build type
@@ -434,7 +348,6 @@ CONFIG_BOOTLOADER_LOG_TIMESTAMP_SOURCE_CPU_TICKS=y
 CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y
 # end of Serial Flash Configurations
 
-CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
 # CONFIG_BOOTLOADER_FACTORY_RESET is not set
 # CONFIG_BOOTLOADER_APP_TEST is not set
 CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE=y
@@ -475,13 +388,11 @@ CONFIG_ESP_ROM_HAS_CRC_BE=y
 CONFIG_ESP_ROM_HAS_MZ_CRC32=y
 CONFIG_ESP_ROM_HAS_JPEG_DECODE=y
 CONFIG_ESP_ROM_UART_CLK_IS_XTAL=y
+CONFIG_ESP_ROM_USB_SERIAL_DEVICE_NUM=3
 CONFIG_ESP_ROM_HAS_RETARGETABLE_LOCKING=y
-CONFIG_ESP_ROM_USB_OTG_NUM=3
-CONFIG_ESP_ROM_USB_SERIAL_DEVICE_NUM=4
 CONFIG_ESP_ROM_HAS_ERASE_0_REGION_BUG=y
 CONFIG_ESP_ROM_HAS_ENCRYPTED_WRITES_USING_LEGACY_DRV=y
 CONFIG_ESP_ROM_GET_CLK_FREQ=y
-CONFIG_ESP_ROM_HAS_HAL_WDT=y
 CONFIG_ESP_ROM_NEEDS_SWSETUP_WORKAROUND=y
 CONFIG_ESP_ROM_HAS_LAYOUT_TABLE=y
 CONFIG_ESP_ROM_HAS_SPI_FLASH=y
@@ -491,13 +402,10 @@ CONFIG_ESP_ROM_HAS_NEWLIB_NANO_FORMAT=y
 CONFIG_ESP_ROM_HAS_NEWLIB_32BIT_TIME=y
 CONFIG_ESP_ROM_NEEDS_SET_CACHE_MMU_SIZE=y
 CONFIG_ESP_ROM_RAM_APP_NEEDS_MMU_INIT=y
-CONFIG_ESP_ROM_HAS_FLASH_COUNT_PAGES_BUG=y
-CONFIG_ESP_ROM_HAS_CACHE_SUSPEND_WAITI_BUG=y
-CONFIG_ESP_ROM_HAS_CACHE_WRITEBACK_BUG=y
 CONFIG_ESP_ROM_HAS_SW_FLOAT=y
+CONFIG_ESP_ROM_USB_OTG_NUM=-1
 CONFIG_ESP_ROM_HAS_VERSION=y
 CONFIG_ESP_ROM_SUPPORT_DEEP_SLEEP_WAKEUP_STUB=y
-CONFIG_ESP_ROM_HAS_OUTPUT_PUTC_FUNC=y
 
 #
 # Boot ROM Behavior
@@ -512,29 +420,27 @@ CONFIG_BOOT_ROM_LOG_ALWAYS_ON=y
 # Serial flasher config
 #
 # CONFIG_ESPTOOLPY_NO_STUB is not set
-# CONFIG_ESPTOOLPY_OCT_FLASH is not set
-CONFIG_ESPTOOLPY_FLASH_MODE_AUTO_DETECT=y
-CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
+# CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set
 # CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
-# CONFIG_ESPTOOLPY_FLASHMODE_DIO is not set
+CONFIG_ESPTOOLPY_FLASHMODE_DIO=y
 # CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set
 CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y
 CONFIG_ESPTOOLPY_FLASHMODE="dio"
-# CONFIG_ESPTOOLPY_FLASHFREQ_120M is not set
 CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
 # CONFIG_ESPTOOLPY_FLASHFREQ_40M is not set
+# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set
 # CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set
 CONFIG_ESPTOOLPY_FLASHFREQ="80m"
 # CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
-CONFIG_ESPTOOLPY_FLASHSIZE_16MB=y
+CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y
+# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set
-CONFIG_ESPTOOLPY_FLASHSIZE="16MB"
-CONFIG_ESPTOOLPY_HEADER_FLASHSIZE_UPDATE=y
+CONFIG_ESPTOOLPY_FLASHSIZE="8MB"
+# CONFIG_ESPTOOLPY_HEADER_FLASHSIZE_UPDATE is not set
 CONFIG_ESPTOOLPY_BEFORE_RESET=y
 # CONFIG_ESPTOOLPY_BEFORE_NORESET is not set
 CONFIG_ESPTOOLPY_BEFORE="default_reset"
@@ -581,6 +487,7 @@ CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
 # CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set
 # CONFIG_COMPILER_NO_MERGE_CONSTANTS is not set
 # CONFIG_COMPILER_WARN_WRITE_STRINGS is not set
+# CONFIG_COMPILER_SAVE_RESTORE_LIBCALLS is not set
 CONFIG_COMPILER_DISABLE_DEFAULT_ERRORS=y
 # CONFIG_COMPILER_DISABLE_GCC12_WARNINGS is not set
 # CONFIG_COMPILER_DISABLE_GCC13_WARNINGS is not set
@@ -603,7 +510,6 @@ CONFIG_COMPILER_ORPHAN_SECTIONS_WARNING=y
 # CONFIG_APPTRACE_DEST_JTAG is not set
 CONFIG_APPTRACE_DEST_NONE=y
 # CONFIG_APPTRACE_DEST_UART1 is not set
-# CONFIG_APPTRACE_DEST_UART2 is not set
 # CONFIG_APPTRACE_DEST_USB_CDC is not set
 CONFIG_APPTRACE_DEST_UART_NONE=y
 CONFIG_APPTRACE_UART_TASK_PRIO=1
@@ -624,15 +530,13 @@ CONFIG_BT_CONTROLLER_ENABLED=y
 # Bluedroid Options
 #
 CONFIG_BT_BTC_TASK_STACK_SIZE=3072
-# CONFIG_BT_BLUEDROID_PINNED_TO_CORE_0 is not set
-CONFIG_BT_BLUEDROID_PINNED_TO_CORE_1=y
-CONFIG_BT_BLUEDROID_PINNED_TO_CORE=1
+CONFIG_BT_BLUEDROID_PINNED_TO_CORE=0
 CONFIG_BT_BTU_TASK_STACK_SIZE=4352
 # CONFIG_BT_BLUEDROID_MEM_DEBUG is not set
 CONFIG_BT_BLUEDROID_ESP_COEX_VSC=y
 CONFIG_BT_BLE_ENABLED=y
 CONFIG_BT_GATTS_ENABLE=y
-CONFIG_BT_GATTS_PPCP_CHAR_GAP=y
+# CONFIG_BT_GATTS_PPCP_CHAR_GAP is not set
 # CONFIG_BT_BLE_BLUFI_ENABLE is not set
 CONFIG_BT_GATT_MAX_SR_PROFILES=8
 CONFIG_BT_GATT_MAX_SR_ATTRIBUTES=100
@@ -645,10 +549,13 @@ CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE=0
 CONFIG_BT_GATTC_ENABLE=y
 CONFIG_BT_GATTC_MAX_CACHE_CHAR=40
 CONFIG_BT_GATTC_NOTIF_REG_MAX=5
-CONFIG_BT_GATTC_CACHE_NVS_FLASH=y
+# CONFIG_BT_GATTC_CACHE_NVS_FLASH is not set
 CONFIG_BT_GATTC_CONNECT_RETRY_COUNT=3
 CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT=30
-# CONFIG_BT_BLE_SMP_ENABLE is not set
+CONFIG_BT_BLE_SMP_ENABLE=y
+# CONFIG_BT_SMP_SLAVE_CON_PARAMS_UPD_ENABLE is not set
+# CONFIG_BT_BLE_SMP_ID_RESET_ENABLE is not set
+CONFIG_BT_BLE_SMP_BOND_NVS_FLASH=y
 # CONFIG_BT_STACK_NO_LOG is not set
 
 #
@@ -826,16 +733,20 @@ CONFIG_BT_LOG_BLUFI_TRACE_LEVEL=2
 
 CONFIG_BT_ACL_CONNECTIONS=4
 CONFIG_BT_MULTI_CONNECTION_ENBALE=y
-CONFIG_BT_ALLOCATION_FROM_SPIRAM_FIRST=y
+# CONFIG_BT_ALLOCATION_FROM_SPIRAM_FIRST is not set
 # CONFIG_BT_BLE_DYNAMIC_ENV_MEMORY is not set
+CONFIG_BT_SMP_ENABLE=y
+CONFIG_BT_SMP_MAX_BONDS=15
 # CONFIG_BT_BLE_ACT_SCAN_REP_ADV_SCAN is not set
 CONFIG_BT_MAX_DEVICE_NAME_LEN=32
 CONFIG_BT_BLE_RPA_TIMEOUT=900
-# CONFIG_BT_BLE_50_FEATURES_SUPPORTED is not set
-CONFIG_BT_BLE_42_FEATURES_SUPPORTED=y
-CONFIG_BT_BLE_42_DTM_TEST_EN=y
-CONFIG_BT_BLE_42_ADV_EN=y
-CONFIG_BT_BLE_42_SCAN_EN=y
+CONFIG_BT_BLE_50_FEATURES_SUPPORTED=y
+CONFIG_BT_BLE_50_EXTEND_ADV_EN=y
+CONFIG_BT_BLE_50_PERIODIC_ADV_EN=y
+CONFIG_BT_BLE_50_EXTEND_SCAN_EN=y
+CONFIG_BT_BLE_50_EXTEND_SYNC_EN=y
+CONFIG_BT_BLE_50_DTM_TEST_EN=y
+# CONFIG_BT_BLE_42_FEATURES_SUPPORTED is not set
 # CONFIG_BT_BLE_HIGH_DUTY_ADV_INTERVAL is not set
 # CONFIG_BT_ABORT_WHEN_ALLOCATION_FAILS is not set
 # end of Bluedroid Options
@@ -847,8 +758,6 @@ CONFIG_BT_CTRL_MODE_EFF=1
 CONFIG_BT_CTRL_BLE_MAX_ACT=6
 CONFIG_BT_CTRL_BLE_MAX_ACT_EFF=6
 CONFIG_BT_CTRL_BLE_STATIC_ACL_TX_BUF_NB=0
-CONFIG_BT_CTRL_PINNED_TO_CORE_0=y
-# CONFIG_BT_CTRL_PINNED_TO_CORE_1 is not set
 CONFIG_BT_CTRL_PINNED_TO_CORE=0
 CONFIG_BT_CTRL_HCI_MODE_VHCI=y
 # CONFIG_BT_CTRL_HCI_MODE_UART_H4 is not set
@@ -982,13 +891,6 @@ CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM=y
 # end of Legacy ADC Calibration Configuration
 # end of Legacy ADC Driver Configuration
 
-#
-# Legacy MCPWM Driver Configurations
-#
-# CONFIG_MCPWM_SUPPRESS_DEPRECATE_WARN is not set
-# CONFIG_MCPWM_SKIP_LEGACY_CONFLICT_CHECK is not set
-# end of Legacy MCPWM Driver Configurations
-
 #
 # Legacy Timer Group Driver Configurations
 #
@@ -1016,13 +918,6 @@ CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM=y
 # CONFIG_I2C_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy I2C Driver Configurations
 
-#
-# Legacy PCNT Driver Configurations
-#
-# CONFIG_PCNT_SUPPRESS_DEPRECATE_WARN is not set
-# CONFIG_PCNT_SKIP_LEGACY_CONFLICT_CHECK is not set
-# end of Legacy PCNT Driver Configurations
-
 #
 # Legacy SDM Driver Configurations
 #
@@ -1065,6 +960,7 @@ CONFIG_ESP_TLS_USE_DS_PERIPHERAL=y
 # CONFIG_ADC_ONESHOT_CTRL_FUNC_IN_IRAM is not set
 # CONFIG_ADC_CONTINUOUS_ISR_IRAM_SAFE is not set
 # CONFIG_ADC_CONTINUOUS_FORCE_USE_ADC2_ON_C3_S3 is not set
+# CONFIG_ADC_ONESHOT_FORCE_USE_ADC2_ON_C3 is not set
 # CONFIG_ADC_ENABLE_DEBUG_LOG is not set
 # end of ADC and ADC Calibration
 
@@ -1074,13 +970,13 @@ CONFIG_ESP_TLS_USE_DS_PERIPHERAL=y
 CONFIG_ESP_COEX_ENABLED=y
 CONFIG_ESP_COEX_SW_COEXIST_ENABLE=y
 # CONFIG_ESP_COEX_POWER_MANAGEMENT is not set
+# CONFIG_ESP_COEX_GPIO_DEBUG is not set
 # end of Wireless Coexistence
 
 #
 # Common ESP-related
 #
 CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
-CONFIG_ESP_ALLOW_BSS_SEG_EXTERNAL_MEMORY=y
 # end of Common ESP-related
 
 #
@@ -1120,22 +1016,6 @@ CONFIG_GPTIMER_OBJ_CACHE_SAFE=y
 # CONFIG_LEDC_CTRL_FUNC_IN_IRAM is not set
 # end of ESP-Driver:LEDC Configurations
 
-#
-# ESP-Driver:MCPWM Configurations
-#
-# CONFIG_MCPWM_ISR_IRAM_SAFE is not set
-# CONFIG_MCPWM_CTRL_FUNC_IN_IRAM is not set
-# CONFIG_MCPWM_ENABLE_DEBUG_LOG is not set
-# end of ESP-Driver:MCPWM Configurations
-
-#
-# ESP-Driver:PCNT Configurations
-#
-# CONFIG_PCNT_CTRL_FUNC_IN_IRAM is not set
-# CONFIG_PCNT_ISR_IRAM_SAFE is not set
-# CONFIG_PCNT_ENABLE_DEBUG_LOG is not set
-# end of ESP-Driver:PCNT Configurations
-
 #
 # ESP-Driver:RMT Configurations
 #
@@ -1160,14 +1040,6 @@ CONFIG_SPI_MASTER_ISR_IN_IRAM=y
 CONFIG_SPI_SLAVE_ISR_IN_IRAM=y
 # end of ESP-Driver:SPI Configurations
 
-#
-# ESP-Driver:Touch Sensor Configurations
-#
-# CONFIG_TOUCH_CTRL_FUNC_IN_IRAM is not set
-# CONFIG_TOUCH_ISR_IRAM_SAFE is not set
-# CONFIG_TOUCH_ENABLE_DEBUG_LOG is not set
-# end of ESP-Driver:Touch Sensor Configurations
-
 #
 # ESP-Driver:Temperature Sensor Configurations
 #
@@ -1268,22 +1140,25 @@ CONFIG_ESP_HTTPS_SERVER_EVENT_POST_TIMEOUT=2000
 #
 # Chip revision
 #
-CONFIG_ESP32S3_REV_MIN_0=y
-# CONFIG_ESP32S3_REV_MIN_1 is not set
-# CONFIG_ESP32S3_REV_MIN_2 is not set
-CONFIG_ESP32S3_REV_MIN_FULL=0
-CONFIG_ESP_REV_MIN_FULL=0
+# CONFIG_ESP32C3_REV_MIN_0 is not set
+# CONFIG_ESP32C3_REV_MIN_1 is not set
+# CONFIG_ESP32C3_REV_MIN_2 is not set
+CONFIG_ESP32C3_REV_MIN_3=y
+# CONFIG_ESP32C3_REV_MIN_4 is not set
+# CONFIG_ESP32C3_REV_MIN_101 is not set
+CONFIG_ESP32C3_REV_MIN_FULL=3
+CONFIG_ESP_REV_MIN_FULL=3
 
 #
-# Maximum Supported ESP32-S3 Revision (Rev v0.99)
+# Maximum Supported ESP32-C3 Revision (Rev v1.99)
 #
-CONFIG_ESP32S3_REV_MAX_FULL=99
-CONFIG_ESP_REV_MAX_FULL=99
+CONFIG_ESP32C3_REV_MAX_FULL=199
+CONFIG_ESP_REV_MAX_FULL=199
 CONFIG_ESP_EFUSE_BLOCK_REV_MIN_FULL=0
 CONFIG_ESP_EFUSE_BLOCK_REV_MAX_FULL=199
 
 #
-# Maximum Supported ESP32-S3 eFuse Block Revision (eFuse Block Rev v1.99)
+# Maximum Supported ESP32-C3 eFuse Block Revision (eFuse Block Rev v1.99)
 #
 # end of Chip revision
 
@@ -1296,25 +1171,23 @@ CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
 CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
 CONFIG_ESP_MAC_UNIVERSAL_MAC_ADDRESSES_FOUR=y
 CONFIG_ESP_MAC_UNIVERSAL_MAC_ADDRESSES=4
-# CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES_TWO is not set
-CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES_FOUR=y
-CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES=4
+# CONFIG_ESP32C3_UNIVERSAL_MAC_ADDRESSES_TWO is not set
+CONFIG_ESP32C3_UNIVERSAL_MAC_ADDRESSES_FOUR=y
+CONFIG_ESP32C3_UNIVERSAL_MAC_ADDRESSES=4
 # CONFIG_ESP_MAC_USE_CUSTOM_MAC_AS_BASE_MAC is not set
 # end of MAC Config
 
 #
 # Sleep Config
 #
+# CONFIG_ESP_SLEEP_POWER_DOWN_FLASH is not set
 CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND=y
-CONFIG_ESP_SLEEP_PSRAM_LEAKAGE_WORKAROUND=y
-CONFIG_ESP_SLEEP_MSPI_NEED_ALL_IO_PU=y
-CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND=y
+# CONFIG_ESP_SLEEP_MSPI_NEED_ALL_IO_PU is not set
 CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND=y
-CONFIG_ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY=2000
+CONFIG_ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY=0
 # CONFIG_ESP_SLEEP_CACHE_SAFE_ASSERTION is not set
 # CONFIG_ESP_SLEEP_DEBUG is not set
 CONFIG_ESP_SLEEP_GPIO_ENABLE_INTERNAL_RESISTORS=y
-# CONFIG_ESP_SLEEP_EVENT_CALLBACKS is not set
 # end of Sleep Config
 
 #
@@ -1330,7 +1203,7 @@ CONFIG_RTC_CLK_CAL_CYCLES=1024
 #
 # Peripheral Control
 #
-CONFIG_PERIPH_CTRL_FUNC_IN_IRAM=y
+# CONFIG_PERIPH_CTRL_FUNC_IN_IRAM is not set
 # end of Peripheral Control
 
 #
@@ -1357,14 +1230,11 @@ CONFIG_ESP_SPI_BUS_LOCK_ISR_FUNCS_IN_IRAM=y
 # ESP-Driver:LCD Controller Configurations
 #
 # CONFIG_LCD_ENABLE_DEBUG_LOG is not set
-# CONFIG_LCD_RGB_ISR_IRAM_SAFE is not set
-# CONFIG_LCD_RGB_RESTART_IN_VSYNC is not set
 # end of ESP-Driver:LCD Controller Configurations
 
 #
 # ESP-MM: Memory Management Configurations
 #
-# CONFIG_ESP_MM_CACHE_MSYNC_C2M_CHUNKED_OPS is not set
 # end of ESP-MM: Memory Management Configurations
 
 #
@@ -1395,7 +1265,6 @@ CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y
 # CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set
 CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20
 CONFIG_ESP_PHY_MAX_TX_POWER=20
-# CONFIG_ESP_PHY_MAC_BB_PD is not set
 # CONFIG_ESP_PHY_REDUCE_TX_POWER is not set
 CONFIG_ESP_PHY_ENABLE_USB=y
 # CONFIG_ESP_PHY_ENABLE_CERT_TEST is not set
@@ -1411,52 +1280,17 @@ CONFIG_ESP_PHY_CALIBRATION_MODE=0
 # Power Management
 #
 CONFIG_PM_ENABLE=y
-CONFIG_PM_DFS_INIT_AUTO=y
+# CONFIG_PM_DFS_INIT_AUTO is not set
 # CONFIG_PM_PROFILING is not set
 # CONFIG_PM_TRACE is not set
 # CONFIG_PM_SLP_IRAM_OPT is not set
-# CONFIG_PM_RTOS_IDLE_OPT is not set
-CONFIG_PM_SLP_DISABLE_GPIO=y
 CONFIG_PM_LIGHTSLEEP_RTC_OSC_CAL_INTERVAL=1
 CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP=y
-CONFIG_PM_RESTORE_CACHE_TAGMEM_AFTER_LIGHT_SLEEP=y
-# CONFIG_PM_LIGHT_SLEEP_CALLBACKS is not set
 # end of Power Management
 
 #
 # ESP PSRAM
 #
-CONFIG_SPIRAM=y
-
-#
-# SPI RAM config
-#
-# CONFIG_SPIRAM_MODE_QUAD is not set
-CONFIG_SPIRAM_MODE_OCT=y
-# CONFIG_SPIRAM_TYPE_AUTO is not set
-CONFIG_SPIRAM_TYPE_ESPPSRAM64=y
-CONFIG_SPIRAM_CLK_IO=30
-CONFIG_SPIRAM_CS_IO=26
-# CONFIG_SPIRAM_XIP_FROM_PSRAM is not set
-CONFIG_SPIRAM_FETCH_INSTRUCTIONS=y
-CONFIG_SPIRAM_RODATA=y
-CONFIG_SPIRAM_SPEED_80M=y
-# CONFIG_SPIRAM_SPEED_40M is not set
-CONFIG_SPIRAM_SPEED=80
-CONFIG_SPIRAM_ECC_ENABLE=y
-CONFIG_SPIRAM_BOOT_INIT=y
-CONFIG_SPIRAM_PRE_CONFIGURE_MEMORY_PROTECTION=y
-# CONFIG_SPIRAM_USE_MEMMAP is not set
-# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
-CONFIG_SPIRAM_USE_MALLOC=y
-# CONFIG_SPIRAM_MEMTEST is not set
-CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL=16384
-CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP=y
-CONFIG_SPIRAM_MALLOC_RESERVE_INTERNAL=32768
-CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY=y
-CONFIG_SPIRAM_ALLOW_NOINIT_SEG_EXTERNAL_MEMORY=y
-# end of SPI RAM config
-# end of ESP PSRAM
 
 #
 # ESP Ringbuf
@@ -1474,55 +1308,16 @@ CONFIG_SPIRAM_ALLOW_NOINIT_SEG_EXTERNAL_MEMORY=y
 #
 # CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_80 is not set
 CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160=y
-# CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_240 is not set
 CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ=160
-
-#
-# Cache config
-#
-CONFIG_ESP32S3_INSTRUCTION_CACHE_16KB=y
-# CONFIG_ESP32S3_INSTRUCTION_CACHE_32KB is not set
-CONFIG_ESP32S3_INSTRUCTION_CACHE_SIZE=0x4000
-# CONFIG_ESP32S3_INSTRUCTION_CACHE_4WAYS is not set
-CONFIG_ESP32S3_INSTRUCTION_CACHE_8WAYS=y
-CONFIG_ESP32S3_ICACHE_ASSOCIATED_WAYS=8
-# CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_16B is not set
-CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_32B=y
-CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_SIZE=32
-# CONFIG_ESP32S3_DATA_CACHE_16KB is not set
-CONFIG_ESP32S3_DATA_CACHE_32KB=y
-# CONFIG_ESP32S3_DATA_CACHE_64KB is not set
-CONFIG_ESP32S3_DATA_CACHE_SIZE=0x8000
-# CONFIG_ESP32S3_DATA_CACHE_4WAYS is not set
-CONFIG_ESP32S3_DATA_CACHE_8WAYS=y
-CONFIG_ESP32S3_DCACHE_ASSOCIATED_WAYS=8
-# CONFIG_ESP32S3_DATA_CACHE_LINE_16B is not set
-CONFIG_ESP32S3_DATA_CACHE_LINE_32B=y
-# CONFIG_ESP32S3_DATA_CACHE_LINE_64B is not set
-CONFIG_ESP32S3_DATA_CACHE_LINE_SIZE=32
-# end of Cache config
-
-#
-# Memory
-#
-# CONFIG_ESP32S3_RTCDATA_IN_FAST_MEM is not set
-# CONFIG_ESP32S3_USE_FIXED_STATIC_RAM_SIZE is not set
-# end of Memory
-
-#
-# Trace memory
-#
-# CONFIG_ESP32S3_TRAX is not set
-CONFIG_ESP32S3_TRACEMEM_RESERVE_DRAM=0x0
-# end of Trace memory
-
 # CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set
 CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y
 # CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
 # CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set
 CONFIG_ESP_SYSTEM_PANIC_REBOOT_DELAY_SECONDS=0
+CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE=y
 CONFIG_ESP_SYSTEM_RTC_FAST_MEM_AS_HEAP_DEPCHECK=y
 CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP=y
+# CONFIG_ESP_SYSTEM_USE_EH_FRAME is not set
 
 #
 # Memory protection
@@ -1535,12 +1330,10 @@ CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
 CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304
 CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
 CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y
-# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set
 # CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set
 CONFIG_ESP_MAIN_TASK_AFFINITY=0x0
 CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048
 CONFIG_ESP_CONSOLE_UART_DEFAULT=y
-# CONFIG_ESP_CONSOLE_USB_CDC is not set
 # CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG is not set
 # CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
 # CONFIG_ESP_CONSOLE_NONE is not set
@@ -1553,13 +1346,11 @@ CONFIG_ESP_CONSOLE_ROM_SERIAL_PORT_NUM=0
 CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
 CONFIG_ESP_INT_WDT=y
 CONFIG_ESP_INT_WDT_TIMEOUT_MS=300
-CONFIG_ESP_INT_WDT_CHECK_CPU1=y
 CONFIG_ESP_TASK_WDT_EN=y
 CONFIG_ESP_TASK_WDT_INIT=y
 # CONFIG_ESP_TASK_WDT_PANIC is not set
 CONFIG_ESP_TASK_WDT_TIMEOUT_S=5
 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
-CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
 # CONFIG_ESP_PANIC_HANDLER_IRAM is not set
 # CONFIG_ESP_DEBUG_STUBS_ENABLE is not set
 CONFIG_ESP_DEBUG_OCDAWARE=y
@@ -1575,20 +1366,18 @@ CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7=y
 # CONFIG_ESP_BROWNOUT_DET_LVL_SEL_4 is not set
 # CONFIG_ESP_BROWNOUT_DET_LVL_SEL_3 is not set
 # CONFIG_ESP_BROWNOUT_DET_LVL_SEL_2 is not set
-# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_1 is not set
 CONFIG_ESP_BROWNOUT_DET_LVL=7
 # end of Brownout Detector
 
 CONFIG_ESP_SYSTEM_BROWNOUT_INTR=y
-CONFIG_ESP_SYSTEM_BBPLL_RECALIB=y
+CONFIG_ESP_SYSTEM_HW_STACK_GUARD=y
+CONFIG_ESP_SYSTEM_HW_PC_RECORD=y
 # end of ESP System Settings
 
 #
 # IPC (Inter-Processor Call)
 #
-CONFIG_ESP_IPC_TASK_STACK_SIZE=1280
-CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y
-CONFIG_ESP_IPC_ISR_ENABLE=y
+CONFIG_ESP_IPC_TASK_STACK_SIZE=1024
 # end of IPC (Inter-Processor Call)
 
 #
@@ -1613,10 +1402,10 @@ CONFIG_ESP_TIMER_IMPL_SYSTIMER=y
 CONFIG_ESP_WIFI_ENABLED=y
 CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=10
 CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM=32
-CONFIG_ESP_WIFI_STATIC_TX_BUFFER=y
-CONFIG_ESP_WIFI_TX_BUFFER_TYPE=0
-CONFIG_ESP_WIFI_STATIC_TX_BUFFER_NUM=16
-CONFIG_ESP_WIFI_CACHE_TX_BUFFER_NUM=32
+# CONFIG_ESP_WIFI_STATIC_TX_BUFFER is not set
+CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER=y
+CONFIG_ESP_WIFI_TX_BUFFER_TYPE=1
+CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM=32
 CONFIG_ESP_WIFI_STATIC_RX_MGMT_BUFFER=y
 # CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUFFER is not set
 CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUF=0
@@ -1626,10 +1415,7 @@ CONFIG_ESP_WIFI_AMPDU_TX_ENABLED=y
 CONFIG_ESP_WIFI_TX_BA_WIN=6
 CONFIG_ESP_WIFI_AMPDU_RX_ENABLED=y
 CONFIG_ESP_WIFI_RX_BA_WIN=6
-# CONFIG_ESP_WIFI_AMSDU_TX_ENABLED is not set
 CONFIG_ESP_WIFI_NVS_ENABLED=y
-CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_0=y
-# CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_1 is not set
 CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN=752
 CONFIG_ESP_WIFI_MGMT_SBUF_NUM=32
 CONFIG_ESP_WIFI_IRAM_OPT=y
@@ -1716,7 +1502,6 @@ CONFIG_FATFS_CODEPAGE=437
 CONFIG_FATFS_FS_LOCK=0
 CONFIG_FATFS_TIMEOUT_MS=10000
 CONFIG_FATFS_PER_FILE_CACHE=y
-CONFIG_FATFS_ALLOC_PREFER_EXTRAM=y
 # CONFIG_FATFS_USE_FASTSEEK is not set
 CONFIG_FATFS_USE_STRFUNC_NONE=y
 # CONFIG_FATFS_USE_STRFUNC_WITHOUT_CRLF_CONV is not set
@@ -1743,8 +1528,9 @@ CONFIG_FATFS_DONT_TRUST_LAST_ALLOC=0
 # Kernel
 #
 # CONFIG_FREERTOS_SMP is not set
-# CONFIG_FREERTOS_UNICORE is not set
+CONFIG_FREERTOS_UNICORE=y
 CONFIG_FREERTOS_HZ=100
+CONFIG_FREERTOS_OPTIMIZED_SCHEDULER=y
 # CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set
 # CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set
 CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y
@@ -1757,7 +1543,6 @@ CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16
 CONFIG_FREERTOS_USE_TIMERS=y
 CONFIG_FREERTOS_TIMER_SERVICE_TASK_NAME="Tmr Svc"
 # CONFIG_FREERTOS_TIMER_TASK_AFFINITY_CPU0 is not set
-# CONFIG_FREERTOS_TIMER_TASK_AFFINITY_CPU1 is not set
 CONFIG_FREERTOS_TIMER_TASK_NO_AFFINITY=y
 CONFIG_FREERTOS_TIMER_SERVICE_TASK_CORE_AFFINITY=0x7FFFFFFF
 CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1
@@ -1768,8 +1553,7 @@ CONFIG_FREERTOS_TASK_NOTIFICATION_ARRAY_ENTRIES=1
 # CONFIG_FREERTOS_USE_TRACE_FACILITY is not set
 # CONFIG_FREERTOS_USE_LIST_DATA_INTEGRITY_CHECK_BYTES is not set
 # CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set
-CONFIG_FREERTOS_USE_TICKLESS_IDLE=y
-CONFIG_FREERTOS_IDLE_TIME_BEFORE_SLEEP=3
+# CONFIG_FREERTOS_USE_TICKLESS_IDLE is not set
 # CONFIG_FREERTOS_USE_APPLICATION_TASK_TAG is not set
 # end of Kernel
 
@@ -1784,7 +1568,6 @@ CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS=y
 CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
 CONFIG_FREERTOS_ISR_STACKSIZE=1536
 CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y
-# CONFIG_FREERTOS_FPU_IN_ISR is not set
 CONFIG_FREERTOS_TICK_SUPPORT_SYSTIMER=y
 CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL1=y
 # CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL3 is not set
@@ -1796,7 +1579,6 @@ CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER=y
 #
 # Extra
 #
-CONFIG_FREERTOS_TASK_CREATE_ALLOW_EXT_MEM=y
 # end of Extra
 
 CONFIG_FREERTOS_PORT=y
@@ -1805,7 +1587,7 @@ CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
 CONFIG_FREERTOS_DEBUG_OCDAWARE=y
 CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT=y
 CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH=y
-CONFIG_FREERTOS_NUMBER_OF_CORES=2
+CONFIG_FREERTOS_NUMBER_OF_CORES=1
 # end of FreeRTOS
 
 #
@@ -1816,7 +1598,6 @@ CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y
 # CONFIG_HAL_ASSERTION_SILENT is not set
 # CONFIG_HAL_ASSERTION_ENABLE is not set
 CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
-CONFIG_HAL_WDT_USE_ROM_IMPL=y
 CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM=y
 CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM=y
 # end of Hardware Abstraction Layer (HAL) and Low Level (LL)
@@ -1967,7 +1748,6 @@ CONFIG_LWIP_TCP_OOSEQ_MAX_PBUFS=4
 CONFIG_LWIP_TCP_OVERSIZE_MSS=y
 # CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set
 # CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set
-# CONFIG_LWIP_WND_SCALE is not set
 CONFIG_LWIP_TCP_RTO_TIME=1500
 # end of TCP
 
@@ -1989,7 +1769,6 @@ CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y
 CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072
 CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
 # CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set
-# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set
 CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF
 CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
 CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
@@ -2067,7 +1846,6 @@ CONFIG_LWIP_HOOK_IP6_INPUT_DEFAULT=y
 # mbedTLS
 #
 CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
-# CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC is not set
 # CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set
 # CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set
 CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y
@@ -2106,7 +1884,7 @@ CONFIG_MBEDTLS_AES_USE_INTERRUPT=y
 CONFIG_MBEDTLS_AES_INTERRUPT_LEVEL=0
 CONFIG_MBEDTLS_GCM_SUPPORT_NON_AES_CIPHER=y
 CONFIG_MBEDTLS_HARDWARE_MPI=y
-# CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI is not set
+CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI=y
 CONFIG_MBEDTLS_MPI_USE_INTERRUPT=y
 CONFIG_MBEDTLS_MPI_INTERRUPT_LEVEL=0
 CONFIG_MBEDTLS_HARDWARE_SHA=y
@@ -2234,15 +2012,12 @@ CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT=y
 # CONFIG_NEWLIB_TIME_SYSCALL_USE_NONE is not set
 # end of Newlib
 
-CONFIG_STDATOMIC_S32C1I_SPIRAM_WORKAROUND=y
-
 #
 # NVS
 #
 # CONFIG_NVS_ENCRYPTION is not set
 # CONFIG_NVS_ASSERT_ERROR_CHECK is not set
 # CONFIG_NVS_LEGACY_DUP_KEYS_COMPATIBILITY is not set
-CONFIG_NVS_ALLOCATE_CACHE_IN_SPIRAM=y
 # end of NVS
 
 #
@@ -2272,9 +2047,6 @@ CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_PATCH_VERSION=y
 CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5
 CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
 CONFIG_PTHREAD_STACK_MIN=768
-CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY=y
-# CONFIG_PTHREAD_DEFAULT_CORE_0 is not set
-# CONFIG_PTHREAD_DEFAULT_CORE_1 is not set
 CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1
 CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread"
 # end of PThreads
@@ -2305,12 +2077,6 @@ CONFIG_SPI_FLASH_BROWNOUT_RESET=y
 #
 # Features here require specific hardware (READ DOCS FIRST!)
 #
-# CONFIG_SPI_FLASH_HPM_ENA is not set
-CONFIG_SPI_FLASH_HPM_AUTO=y
-# CONFIG_SPI_FLASH_HPM_DIS is not set
-CONFIG_SPI_FLASH_HPM_ON=y
-CONFIG_SPI_FLASH_HPM_DC_AUTO=y
-# CONFIG_SPI_FLASH_HPM_DC_DISABLE is not set
 # CONFIG_SPI_FLASH_AUTO_SUSPEND is not set
 CONFIG_SPI_FLASH_SUSPEND_TSUS_VAL_US=50
 # CONFIG_SPI_FLASH_FORCE_ENABLE_XMC_C_SUSPEND is not set
@@ -2353,7 +2119,6 @@ CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y
 CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y
 CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP=y
 CONFIG_SPI_FLASH_SUPPORT_TH_CHIP=y
-CONFIG_SPI_FLASH_SUPPORT_MXIC_OPI_CHIP=y
 # end of Auto-detect flash chips
 
 CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y
@@ -2408,17 +2173,6 @@ CONFIG_WS_BUFFER_SIZE=1024
 # end of Websocket
 # end of TCP Transport
 
-#
-# Ultra Low Power (ULP) Co-processor
-#
-# CONFIG_ULP_COPROC_ENABLED is not set
-
-#
-# ULP Debugging Options
-#
-# end of ULP Debugging Options
-# end of Ultra Low Power (ULP) Co-processor
-
 #
 # Unity unit testing library
 #
@@ -2431,34 +2185,6 @@ CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y
 # CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set
 # end of Unity unit testing library
 
-#
-# USB-OTG
-#
-CONFIG_USB_HOST_CONTROL_TRANSFER_MAX_SIZE=256
-CONFIG_USB_HOST_HW_BUFFER_BIAS_BALANCED=y
-# CONFIG_USB_HOST_HW_BUFFER_BIAS_IN is not set
-# CONFIG_USB_HOST_HW_BUFFER_BIAS_PERIODIC_OUT is not set
-
-#
-# Hub Driver Configuration
-#
-
-#
-# Root Port configuration
-#
-CONFIG_USB_HOST_DEBOUNCE_DELAY_MS=250
-CONFIG_USB_HOST_RESET_HOLD_MS=30
-CONFIG_USB_HOST_RESET_RECOVERY_MS=30
-CONFIG_USB_HOST_SET_ADDR_RECOVERY_MS=10
-# end of Root Port configuration
-
-# CONFIG_USB_HOST_HUBS_SUPPORTED is not set
-# end of Hub Driver Configuration
-
-# CONFIG_USB_HOST_ENABLE_ENUM_FILTER_CALLBACK is not set
-CONFIG_USB_OTG_SUPPORTED=y
-# end of USB-OTG
-
 #
 # Virtual file system
 #
@@ -2514,18 +2240,7 @@ CONFIG_CU_DIAGNOSTICS_COLOR_ALWAYS=y
 #
 # JPEG Decoder
 #
-# CONFIG_JD_USE_ROM is not set
-CONFIG_JD_SZBUF=512
-CONFIG_JD_FORMAT=0
-CONFIG_JD_FORMAT_RGB888=y
-# CONFIG_JD_FORMAT_RGB565 is not set
-CONFIG_JD_USE_SCALE=y
-CONFIG_JD_TBLCLIP=y
-CONFIG_JD_FASTDECODE=2
-# CONFIG_JD_FASTDECODE_BASIC is not set
-# CONFIG_JD_FASTDECODE_32BIT is not set
-CONFIG_JD_FASTDECODE_TABLE=y
-# CONFIG_JD_DEFAULT_HUFFMAN is not set
+CONFIG_JD_USE_ROM=y
 # end of JPEG Decoder
 
 #
@@ -2565,7 +2280,7 @@ CONFIG_LV_COLOR_CHROMA_KEY_HEX=0x00FF00
 # Memory settings
 #
 # CONFIG_LV_MEM_CUSTOM is not set
-CONFIG_LV_MEM_SIZE_KILOBYTES=64
+CONFIG_LV_MEM_SIZE_KILOBYTES=48
 CONFIG_LV_MEM_ADDR=0x0
 CONFIG_LV_MEM_BUF_MAX_NUM=16
 # CONFIG_LV_MEMCPY_MEMSET_STD is not set
@@ -2723,7 +2438,7 @@ CONFIG_LV_USE_FONT_PLACEHOLDER=y
 #
 CONFIG_LV_TXT_ENC_UTF8=y
 # CONFIG_LV_TXT_ENC_ASCII is not set
-CONFIG_LV_TXT_BREAK_CHARS=" ,.;:-_)}"
+CONFIG_LV_TXT_BREAK_CHARS=" ,.;:-_"
 CONFIG_LV_TXT_LINE_BREAK_LONG_LEN=0
 CONFIG_LV_TXT_COLOR_CMD="#"
 # CONFIG_LV_USE_BIDI is not set
@@ -2820,7 +2535,7 @@ CONFIG_LV_USE_GRID=y
 #
 # Others
 #
-# CONFIG_LV_USE_SNAPSHOT is not set
+CONFIG_LV_USE_SNAPSHOT=y
 # CONFIG_LV_USE_MONKEY is not set
 # CONFIG_LV_USE_GRIDNAV is not set
 # CONFIG_LV_USE_FRAGMENT is not set
@@ -2861,9 +2576,9 @@ CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
 CONFIG_LOG_BOOTLOADER_LEVEL=3
 # CONFIG_APP_ROLLBACK_ENABLE is not set
 # CONFIG_FLASH_ENCRYPTION_ENABLED is not set
-CONFIG_FLASHMODE_QIO=y
+# CONFIG_FLASHMODE_QIO is not set
 # CONFIG_FLASHMODE_QOUT is not set
-# CONFIG_FLASHMODE_DIO is not set
+CONFIG_FLASHMODE_DIO=y
 # CONFIG_FLASHMODE_DOUT is not set
 CONFIG_MONITOR_BAUD=115200
 CONFIG_OPTIMIZATION_LEVEL_DEBUG=y
@@ -2887,9 +2602,7 @@ CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
 CONFIG_BLUEDROID_ENABLED=y
 # CONFIG_NIMBLE_ENABLED is not set
 CONFIG_BTC_TASK_STACK_SIZE=3072
-# CONFIG_BLUEDROID_PINNED_TO_CORE_0 is not set
-CONFIG_BLUEDROID_PINNED_TO_CORE_1=y
-CONFIG_BLUEDROID_PINNED_TO_CORE=1
+CONFIG_BLUEDROID_PINNED_TO_CORE=0
 CONFIG_BTU_TASK_STACK_SIZE=4352
 # CONFIG_BLUEDROID_MEM_DEBUG is not set
 CONFIG_GATTS_ENABLE=y
@@ -2897,9 +2610,10 @@ CONFIG_GATTS_ENABLE=y
 CONFIG_GATTS_SEND_SERVICE_CHANGE_AUTO=y
 CONFIG_GATTS_SEND_SERVICE_CHANGE_MODE=0
 CONFIG_GATTC_ENABLE=y
-CONFIG_GATTC_CACHE_NVS_FLASH=y
+# CONFIG_GATTC_CACHE_NVS_FLASH is not set
 CONFIG_BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT=30
-# CONFIG_BLE_SMP_ENABLE is not set
+CONFIG_BLE_SMP_ENABLE=y
+# CONFIG_SMP_SLAVE_CON_PARAMS_UPD_ENABLE is not set
 # CONFIG_HCI_TRACE_LEVEL_NONE is not set
 # CONFIG_HCI_TRACE_LEVEL_ERROR is not set
 CONFIG_HCI_TRACE_LEVEL_WARNING=y
@@ -3061,43 +2775,38 @@ CONFIG_BLUFI_TRACE_LEVEL_WARNING=y
 # CONFIG_BLUFI_TRACE_LEVEL_DEBUG is not set
 # CONFIG_BLUFI_TRACE_LEVEL_VERBOSE is not set
 CONFIG_BLUFI_INITIAL_TRACE_LEVEL=2
+CONFIG_SMP_ENABLE=y
 # CONFIG_BLE_ACTIVE_SCAN_REPORT_ADV_SCAN_RSP_INDIVIDUALLY is not set
 # CONFIG_BT_NIMBLE_COEX_PHY_CODED_TX_RX_TLIM_EN is not set
 CONFIG_BT_NIMBLE_COEX_PHY_CODED_TX_RX_TLIM_DIS=y
 CONFIG_SW_COEXIST_ENABLE=y
 CONFIG_ESP32_WIFI_SW_COEXIST_ENABLE=y
 CONFIG_ESP_WIFI_SW_COEXIST_ENABLE=y
-# CONFIG_MCPWM_ISR_IN_IRAM is not set
 # CONFIG_EVENT_LOOP_PROFILING is not set
 CONFIG_POST_EVENTS_FROM_ISR=y
 CONFIG_POST_EVENTS_FROM_IRAM_ISR=y
 CONFIG_GDBSTUB_SUPPORT_TASKS=y
 CONFIG_GDBSTUB_MAX_TASKS=32
 # CONFIG_OTA_ALLOW_HTTP is not set
-CONFIG_ESP32S3_DEEP_SLEEP_WAKEUP_DELAY=2000
-CONFIG_ESP_SLEEP_DEEP_SLEEP_WAKEUP_DELAY=2000
-CONFIG_ESP32S3_RTC_CLK_SRC_INT_RC=y
-# CONFIG_ESP32S3_RTC_CLK_SRC_EXT_CRYS is not set
-# CONFIG_ESP32S3_RTC_CLK_SRC_EXT_OSC is not set
-# CONFIG_ESP32S3_RTC_CLK_SRC_INT_8MD256 is not set
-CONFIG_ESP32S3_RTC_CLK_CAL_CYCLES=1024
+# CONFIG_ESP_SYSTEM_PD_FLASH is not set
+CONFIG_ESP32C3_LIGHTSLEEP_GPIO_RESET_WORKAROUND=y
+CONFIG_ESP32C3_RTC_CLK_SRC_INT_RC=y
+# CONFIG_ESP32C3_RTC_CLK_SRC_EXT_CRYS is not set
+# CONFIG_ESP32C3_RTC_CLK_SRC_EXT_OSC is not set
+# CONFIG_ESP32C3_RTC_CLK_SRC_INT_8MD256 is not set
+CONFIG_ESP32C3_RTC_CLK_CAL_CYCLES=1024
 CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
 # CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set
 CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
 CONFIG_ESP32_PHY_MAX_TX_POWER=20
-# CONFIG_MAC_BB_PD is not set
-# CONFIG_ESP32_PHY_MAC_BB_PD is not set
 # CONFIG_REDUCE_PHY_TX_POWER is not set
 # CONFIG_ESP32_REDUCE_PHY_TX_POWER is not set
 CONFIG_ESP_SYSTEM_PM_POWER_DOWN_CPU=y
-CONFIG_PM_POWER_DOWN_TAGMEM_IN_LIGHT_SLEEP=y
-CONFIG_ESP32S3_SPIRAM_SUPPORT=y
-CONFIG_DEFAULT_PSRAM_CLK_IO=30
-CONFIG_DEFAULT_PSRAM_CS_IO=26
-# CONFIG_ESP32S3_DEFAULT_CPU_FREQ_80 is not set
-CONFIG_ESP32S3_DEFAULT_CPU_FREQ_160=y
-# CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240 is not set
-CONFIG_ESP32S3_DEFAULT_CPU_FREQ_MHZ=160
+# CONFIG_ESP32C3_DEFAULT_CPU_FREQ_80 is not set
+CONFIG_ESP32C3_DEFAULT_CPU_FREQ_160=y
+CONFIG_ESP32C3_DEFAULT_CPU_FREQ_MHZ=160
+CONFIG_ESP32C3_MEMPROT_FEATURE=y
+CONFIG_ESP32C3_MEMPROT_FEATURE_LOCK=y
 CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
 CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304
 CONFIG_MAIN_TASK_STACK_SIZE=3584
@@ -3110,51 +2819,44 @@ CONFIG_CONSOLE_UART_NUM=0
 CONFIG_CONSOLE_UART_BAUDRATE=115200
 CONFIG_INT_WDT=y
 CONFIG_INT_WDT_TIMEOUT_MS=300
-CONFIG_INT_WDT_CHECK_CPU1=y
 CONFIG_TASK_WDT=y
 CONFIG_ESP_TASK_WDT=y
 # CONFIG_TASK_WDT_PANIC is not set
 CONFIG_TASK_WDT_TIMEOUT_S=5
 CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
-CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
 # CONFIG_ESP32_DEBUG_STUBS_ENABLE is not set
-CONFIG_ESP32S3_DEBUG_OCDAWARE=y
+CONFIG_ESP32C3_DEBUG_OCDAWARE=y
 CONFIG_BROWNOUT_DET=y
-CONFIG_ESP32S3_BROWNOUT_DET=y
+CONFIG_ESP32C3_BROWNOUT_DET=y
 CONFIG_BROWNOUT_DET_LVL_SEL_7=y
-CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_7=y
+CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_7=y
 # CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set
-# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_6 is not set
+# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_6 is not set
 # CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set
-# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_5 is not set
+# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_5 is not set
 # CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set
-# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_4 is not set
+# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_4 is not set
 # CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set
-# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_3 is not set
+# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_3 is not set
 # CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set
-# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_2 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set
-# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_1 is not set
+# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_2 is not set
 CONFIG_BROWNOUT_DET_LVL=7
-CONFIG_ESP32S3_BROWNOUT_DET_LVL=7
-CONFIG_IPC_TASK_STACK_SIZE=1280
+CONFIG_ESP32C3_BROWNOUT_DET_LVL=7
+CONFIG_IPC_TASK_STACK_SIZE=1024
 CONFIG_TIMER_TASK_STACK_SIZE=3584
 CONFIG_ESP32_WIFI_ENABLED=y
 CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10
 CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
-CONFIG_ESP32_WIFI_STATIC_TX_BUFFER=y
-CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=0
-CONFIG_ESP32_WIFI_STATIC_TX_BUFFER_NUM=16
-CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=32
+# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set
+CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y
+CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1
+CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32
 # CONFIG_ESP32_WIFI_CSI_ENABLED is not set
 CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
 CONFIG_ESP32_WIFI_TX_BA_WIN=6
 CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
 CONFIG_ESP32_WIFI_RX_BA_WIN=6
-# CONFIG_ESP32_WIFI_AMSDU_TX_ENABLED is not set
 CONFIG_ESP32_WIFI_NVS_ENABLED=y
-CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
-# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set
 CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752
 CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
 CONFIG_ESP32_WIFI_IRAM_OPT=y
@@ -3180,7 +2882,6 @@ CONFIG_TIMER_TASK_PRIORITY=1
 CONFIG_TIMER_TASK_STACK_DEPTH=2048
 CONFIG_TIMER_QUEUE_LENGTH=10
 # CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set
-CONFIG_SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY=y
 # CONFIG_HAL_ASSERTION_SILIENT is not set
 # CONFIG_L2_TO_L3_COPY is not set
 CONFIG_ESP_GRATUITOUS_ARP=y
@@ -3201,21 +2902,15 @@ CONFIG_UDP_RECVMBOX_SIZE=6
 CONFIG_TCPIP_TASK_STACK_SIZE=3072
 CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
 # CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set
-# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set
 CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF
 # CONFIG_PPP_SUPPORT is not set
-CONFIG_ESP32S3_TIME_SYSCALL_USE_RTC_SYSTIMER=y
-CONFIG_ESP32S3_TIME_SYSCALL_USE_RTC_FRC1=y
-# CONFIG_ESP32S3_TIME_SYSCALL_USE_RTC is not set
-# CONFIG_ESP32S3_TIME_SYSCALL_USE_SYSTIMER is not set
-# CONFIG_ESP32S3_TIME_SYSCALL_USE_FRC1 is not set
-# CONFIG_ESP32S3_TIME_SYSCALL_USE_NONE is not set
+CONFIG_ESP32C3_TIME_SYSCALL_USE_RTC_SYSTIMER=y
+# CONFIG_ESP32C3_TIME_SYSCALL_USE_RTC is not set
+# CONFIG_ESP32C3_TIME_SYSCALL_USE_SYSTIMER is not set
+# CONFIG_ESP32C3_TIME_SYSCALL_USE_NONE is not set
 CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
 CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
 CONFIG_ESP32_PTHREAD_STACK_MIN=768
-CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y
-# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set
-# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set
 CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1
 CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread"
 CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
diff --git a/sdkconfig.old b/sdkconfig.old
index 379ede1..954a0d6 100644
--- a/sdkconfig.old
+++ b/sdkconfig.old
@@ -2,40 +2,26 @@
 # Automatically generated file. DO NOT EDIT.
 # Espressif IoT Development Framework (ESP-IDF) 5.4.2 Project Configuration
 #
-CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000
-CONFIG_SOC_MPU_REGIONS_MAX_NUM=8
 CONFIG_SOC_ADC_SUPPORTED=y
+CONFIG_SOC_DEDICATED_GPIO_SUPPORTED=y
 CONFIG_SOC_UART_SUPPORTED=y
-CONFIG_SOC_PCNT_SUPPORTED=y
-CONFIG_SOC_PHY_SUPPORTED=y
-CONFIG_SOC_WIFI_SUPPORTED=y
-CONFIG_SOC_TWAI_SUPPORTED=y
 CONFIG_SOC_GDMA_SUPPORTED=y
 CONFIG_SOC_AHB_GDMA_SUPPORTED=y
 CONFIG_SOC_GPTIMER_SUPPORTED=y
-CONFIG_SOC_LCDCAM_SUPPORTED=y
-CONFIG_SOC_LCDCAM_I80_LCD_SUPPORTED=y
-CONFIG_SOC_LCDCAM_RGB_LCD_SUPPORTED=y
-CONFIG_SOC_MCPWM_SUPPORTED=y
-CONFIG_SOC_DEDICATED_GPIO_SUPPORTED=y
-CONFIG_SOC_CACHE_SUPPORT_WRAP=y
-CONFIG_SOC_ULP_SUPPORTED=y
-CONFIG_SOC_ULP_FSM_SUPPORTED=y
-CONFIG_SOC_RISCV_COPROC_SUPPORTED=y
+CONFIG_SOC_TWAI_SUPPORTED=y
 CONFIG_SOC_BT_SUPPORTED=y
-CONFIG_SOC_USB_OTG_SUPPORTED=y
-CONFIG_SOC_USB_SERIAL_JTAG_SUPPORTED=y
-CONFIG_SOC_CCOMP_TIMER_SUPPORTED=y
 CONFIG_SOC_ASYNC_MEMCPY_SUPPORTED=y
+CONFIG_SOC_USB_SERIAL_JTAG_SUPPORTED=y
+CONFIG_SOC_TEMP_SENSOR_SUPPORTED=y
+CONFIG_SOC_XT_WDT_SUPPORTED=y
+CONFIG_SOC_PHY_SUPPORTED=y
+CONFIG_SOC_WIFI_SUPPORTED=y
 CONFIG_SOC_SUPPORTS_SECURE_DL_MODE=y
 CONFIG_SOC_EFUSE_KEY_PURPOSE_FIELD=y
+CONFIG_SOC_EFUSE_HAS_EFUSE_RST_BUG=y
 CONFIG_SOC_EFUSE_SUPPORTED=y
-CONFIG_SOC_SDMMC_HOST_SUPPORTED=y
 CONFIG_SOC_RTC_FAST_MEM_SUPPORTED=y
-CONFIG_SOC_RTC_SLOW_MEM_SUPPORTED=y
 CONFIG_SOC_RTC_MEM_SUPPORTED=y
-CONFIG_SOC_PSRAM_DMA_CAPABLE=y
-CONFIG_SOC_XT_WDT_SUPPORTED=y
 CONFIG_SOC_I2S_SUPPORTED=y
 CONFIG_SOC_RMT_SUPPORTED=y
 CONFIG_SOC_SDM_SUPPORTED=y
@@ -44,7 +30,6 @@ CONFIG_SOC_LEDC_SUPPORTED=y
 CONFIG_SOC_I2C_SUPPORTED=y
 CONFIG_SOC_SYSTIMER_SUPPORTED=y
 CONFIG_SOC_SUPPORT_COEXISTENCE=y
-CONFIG_SOC_TEMP_SENSOR_SUPPORTED=y
 CONFIG_SOC_AES_SUPPORTED=y
 CONFIG_SOC_MPI_SUPPORTED=y
 CONFIG_SOC_SHA_SUPPORTED=y
@@ -53,10 +38,9 @@ CONFIG_SOC_DIG_SIGN_SUPPORTED=y
 CONFIG_SOC_FLASH_ENC_SUPPORTED=y
 CONFIG_SOC_SECURE_BOOT_SUPPORTED=y
 CONFIG_SOC_MEMPROT_SUPPORTED=y
-CONFIG_SOC_TOUCH_SENSOR_SUPPORTED=y
 CONFIG_SOC_BOD_SUPPORTED=y
 CONFIG_SOC_CLK_TREE_SUPPORTED=y
-CONFIG_SOC_MPU_SUPPORTED=y
+CONFIG_SOC_ASSIST_DEBUG_SUPPORTED=y
 CONFIG_SOC_WDT_SUPPORTED=y
 CONFIG_SOC_SPI_FLASH_SUPPORTED=y
 CONFIG_SOC_RNG_SUPPORTED=y
@@ -64,20 +48,21 @@ CONFIG_SOC_LIGHT_SLEEP_SUPPORTED=y
 CONFIG_SOC_DEEP_SLEEP_SUPPORTED=y
 CONFIG_SOC_LP_PERIPH_SHARE_INTERRUPT=y
 CONFIG_SOC_PM_SUPPORTED=y
-CONFIG_SOC_SIMD_INSTRUCTION_SUPPORTED=y
 CONFIG_SOC_XTAL_SUPPORT_40M=y
-CONFIG_SOC_APPCPU_HAS_CLOCK_GATING_BUG=y
-CONFIG_SOC_ADC_RTC_CTRL_SUPPORTED=y
+CONFIG_SOC_AES_SUPPORT_DMA=y
+CONFIG_SOC_AES_GDMA=y
+CONFIG_SOC_AES_SUPPORT_AES_128=y
+CONFIG_SOC_AES_SUPPORT_AES_256=y
 CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED=y
 CONFIG_SOC_ADC_ARBITER_SUPPORTED=y
 CONFIG_SOC_ADC_DIG_IIR_FILTER_SUPPORTED=y
 CONFIG_SOC_ADC_MONITOR_SUPPORTED=y
 CONFIG_SOC_ADC_DMA_SUPPORTED=y
 CONFIG_SOC_ADC_PERIPH_NUM=2
-CONFIG_SOC_ADC_MAX_CHANNEL_NUM=10
+CONFIG_SOC_ADC_MAX_CHANNEL_NUM=5
 CONFIG_SOC_ADC_ATTEN_NUM=4
-CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM=2
-CONFIG_SOC_ADC_PATT_LEN_MAX=24
+CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM=1
+CONFIG_SOC_ADC_PATT_LEN_MAX=8
 CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH=12
 CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH=12
 CONFIG_SOC_ADC_DIGI_RESULT_BYTES=4
@@ -93,42 +78,40 @@ CONFIG_SOC_ADC_SELF_HW_CALI_SUPPORTED=y
 CONFIG_SOC_ADC_SHARED_POWER=y
 CONFIG_SOC_APB_BACKUP_DMA=y
 CONFIG_SOC_BROWNOUT_RESET_SUPPORTED=y
-CONFIG_SOC_CACHE_WRITEBACK_SUPPORTED=y
-CONFIG_SOC_CACHE_FREEZE_SUPPORTED=y
-CONFIG_SOC_CPU_CORES_NUM=2
+CONFIG_SOC_SHARED_IDCACHE_SUPPORTED=y
+CONFIG_SOC_CACHE_MEMORY_IBANK_SIZE=0x4000
+CONFIG_SOC_CPU_CORES_NUM=1
 CONFIG_SOC_CPU_INTR_NUM=32
-CONFIG_SOC_CPU_HAS_FPU=y
-CONFIG_SOC_HP_CPU_HAS_MULTIPLE_CORES=y
-CONFIG_SOC_CPU_BREAKPOINTS_NUM=2
-CONFIG_SOC_CPU_WATCHPOINTS_NUM=2
-CONFIG_SOC_CPU_WATCHPOINT_MAX_REGION_SIZE=64
-CONFIG_SOC_SIMD_PREFERRED_DATA_ALIGNMENT=16
-CONFIG_SOC_DS_SIGNATURE_MAX_BIT_LEN=4096
+CONFIG_SOC_CPU_HAS_FLEXIBLE_INTC=y
+CONFIG_SOC_CPU_HAS_CSR_PC=y
+CONFIG_SOC_CPU_BREAKPOINTS_NUM=8
+CONFIG_SOC_CPU_WATCHPOINTS_NUM=8
+CONFIG_SOC_CPU_WATCHPOINT_MAX_REGION_SIZE=0x80000000
+CONFIG_SOC_DS_SIGNATURE_MAX_BIT_LEN=3072
 CONFIG_SOC_DS_KEY_PARAM_MD_IV_LENGTH=16
 CONFIG_SOC_DS_KEY_CHECK_MAX_WAIT_US=1100
 CONFIG_SOC_AHB_GDMA_VERSION=1
 CONFIG_SOC_GDMA_NUM_GROUPS_MAX=1
-CONFIG_SOC_GDMA_PAIRS_PER_GROUP=5
-CONFIG_SOC_GDMA_PAIRS_PER_GROUP_MAX=5
-CONFIG_SOC_AHB_GDMA_SUPPORT_PSRAM=y
+CONFIG_SOC_GDMA_PAIRS_PER_GROUP_MAX=3
 CONFIG_SOC_GPIO_PORT=1
-CONFIG_SOC_GPIO_PIN_COUNT=49
+CONFIG_SOC_GPIO_PIN_COUNT=22
 CONFIG_SOC_GPIO_SUPPORT_PIN_GLITCH_FILTER=y
 CONFIG_SOC_GPIO_FILTER_CLK_SUPPORT_APB=y
-CONFIG_SOC_GPIO_SUPPORT_RTC_INDEPENDENT=y
 CONFIG_SOC_GPIO_SUPPORT_FORCE_HOLD=y
-CONFIG_SOC_GPIO_VALID_GPIO_MASK=0x1FFFFFFFFFFFF
-CONFIG_SOC_GPIO_IN_RANGE_MAX=48
-CONFIG_SOC_GPIO_OUT_RANGE_MAX=48
-CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK=0x0001FFFFFC000000
-CONFIG_SOC_GPIO_CLOCKOUT_BY_IO_MUX=y
+CONFIG_SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP=y
+CONFIG_SOC_GPIO_IN_RANGE_MAX=21
+CONFIG_SOC_GPIO_OUT_RANGE_MAX=21
+CONFIG_SOC_GPIO_DEEP_SLEEP_WAKE_VALID_GPIO_MASK=0
+CONFIG_SOC_GPIO_DEEP_SLEEP_WAKE_SUPPORTED_PIN_CNT=6
+CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK=0x00000000003FFFC0
+CONFIG_SOC_GPIO_CLOCKOUT_BY_GPIO_MATRIX=y
 CONFIG_SOC_GPIO_CLOCKOUT_CHANNEL_NUM=3
 CONFIG_SOC_GPIO_SUPPORT_HOLD_IO_IN_DSLP=y
 CONFIG_SOC_DEDIC_GPIO_OUT_CHANNELS_NUM=8
 CONFIG_SOC_DEDIC_GPIO_IN_CHANNELS_NUM=8
-CONFIG_SOC_DEDIC_GPIO_OUT_AUTO_ENABLE=y
-CONFIG_SOC_I2C_NUM=2
-CONFIG_SOC_HP_I2C_NUM=2
+CONFIG_SOC_DEDIC_PERIPH_ALWAYS_ENABLE=y
+CONFIG_SOC_I2C_NUM=1
+CONFIG_SOC_HP_I2C_NUM=1
 CONFIG_SOC_I2C_FIFO_LEN=32
 CONFIG_SOC_I2C_CMD_REG_NUM=8
 CONFIG_SOC_I2C_SUPPORT_SLAVE=y
@@ -137,9 +120,9 @@ CONFIG_SOC_I2C_SUPPORT_XTAL=y
 CONFIG_SOC_I2C_SUPPORT_RTC=y
 CONFIG_SOC_I2C_SUPPORT_10BIT_ADDR=y
 CONFIG_SOC_I2C_SLAVE_SUPPORT_BROADCAST=y
-CONFIG_SOC_I2C_SLAVE_SUPPORT_I2CRAM_ACCESS=y
 CONFIG_SOC_I2C_SLAVE_CAN_GET_STRETCH_CAUSE=y
-CONFIG_SOC_I2S_NUM=2
+CONFIG_SOC_I2C_SLAVE_SUPPORT_I2CRAM_ACCESS=y
+CONFIG_SOC_I2S_NUM=1
 CONFIG_SOC_I2S_HW_VERSION_2=y
 CONFIG_SOC_I2S_SUPPORTS_XTAL=y
 CONFIG_SOC_I2S_SUPPORTS_PLL_F160M=y
@@ -147,71 +130,50 @@ CONFIG_SOC_I2S_SUPPORTS_PCM=y
 CONFIG_SOC_I2S_SUPPORTS_PDM=y
 CONFIG_SOC_I2S_SUPPORTS_PDM_TX=y
 CONFIG_SOC_I2S_PDM_MAX_TX_LINES=2
-CONFIG_SOC_I2S_SUPPORTS_PDM_RX=y
-CONFIG_SOC_I2S_PDM_MAX_RX_LINES=4
 CONFIG_SOC_I2S_SUPPORTS_TDM=y
 CONFIG_SOC_LEDC_SUPPORT_APB_CLOCK=y
 CONFIG_SOC_LEDC_SUPPORT_XTAL_CLOCK=y
 CONFIG_SOC_LEDC_TIMER_NUM=4
-CONFIG_SOC_LEDC_CHANNEL_NUM=8
+CONFIG_SOC_LEDC_CHANNEL_NUM=6
 CONFIG_SOC_LEDC_TIMER_BIT_WIDTH=14
 CONFIG_SOC_LEDC_SUPPORT_FADE_STOP=y
-CONFIG_SOC_MCPWM_GROUPS=2
-CONFIG_SOC_MCPWM_TIMERS_PER_GROUP=3
-CONFIG_SOC_MCPWM_OPERATORS_PER_GROUP=3
-CONFIG_SOC_MCPWM_COMPARATORS_PER_OPERATOR=2
-CONFIG_SOC_MCPWM_GENERATORS_PER_OPERATOR=2
-CONFIG_SOC_MCPWM_TRIGGERS_PER_OPERATOR=2
-CONFIG_SOC_MCPWM_GPIO_FAULTS_PER_GROUP=3
-CONFIG_SOC_MCPWM_CAPTURE_TIMERS_PER_GROUP=y
-CONFIG_SOC_MCPWM_CAPTURE_CHANNELS_PER_TIMER=3
-CONFIG_SOC_MCPWM_GPIO_SYNCHROS_PER_GROUP=3
-CONFIG_SOC_MCPWM_SWSYNC_CAN_PROPAGATE=y
 CONFIG_SOC_MMU_LINEAR_ADDRESS_REGION_NUM=1
 CONFIG_SOC_MMU_PERIPH_NUM=1
-CONFIG_SOC_PCNT_GROUPS=1
-CONFIG_SOC_PCNT_UNITS_PER_GROUP=4
-CONFIG_SOC_PCNT_CHANNELS_PER_UNIT=2
-CONFIG_SOC_PCNT_THRES_POINT_PER_UNIT=2
+CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000
+CONFIG_SOC_MPU_REGIONS_MAX_NUM=8
 CONFIG_SOC_RMT_GROUPS=1
-CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP=4
-CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP=4
-CONFIG_SOC_RMT_CHANNELS_PER_GROUP=8
+CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP=2
+CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP=2
+CONFIG_SOC_RMT_CHANNELS_PER_GROUP=4
 CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL=48
 CONFIG_SOC_RMT_SUPPORT_RX_PINGPONG=y
 CONFIG_SOC_RMT_SUPPORT_RX_DEMODULATION=y
 CONFIG_SOC_RMT_SUPPORT_TX_ASYNC_STOP=y
 CONFIG_SOC_RMT_SUPPORT_TX_LOOP_COUNT=y
-CONFIG_SOC_RMT_SUPPORT_TX_LOOP_AUTO_STOP=y
 CONFIG_SOC_RMT_SUPPORT_TX_SYNCHRO=y
 CONFIG_SOC_RMT_SUPPORT_TX_CARRIER_DATA_ONLY=y
 CONFIG_SOC_RMT_SUPPORT_XTAL=y
-CONFIG_SOC_RMT_SUPPORT_RC_FAST=y
 CONFIG_SOC_RMT_SUPPORT_APB=y
-CONFIG_SOC_RMT_SUPPORT_DMA=y
-CONFIG_SOC_LCD_I80_SUPPORTED=y
-CONFIG_SOC_LCD_RGB_SUPPORTED=y
-CONFIG_SOC_LCD_I80_BUSES=1
-CONFIG_SOC_LCD_RGB_PANELS=1
-CONFIG_SOC_LCD_I80_BUS_WIDTH=16
-CONFIG_SOC_LCD_RGB_DATA_WIDTH=16
-CONFIG_SOC_LCD_SUPPORT_RGB_YUV_CONV=y
-CONFIG_SOC_LCDCAM_I80_NUM_BUSES=1
-CONFIG_SOC_LCDCAM_I80_BUS_WIDTH=16
-CONFIG_SOC_LCDCAM_RGB_NUM_PANELS=1
-CONFIG_SOC_LCDCAM_RGB_DATA_WIDTH=16
+CONFIG_SOC_RMT_SUPPORT_RC_FAST=y
 CONFIG_SOC_RTC_CNTL_CPU_PD_DMA_BUS_WIDTH=128
-CONFIG_SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM=549
-CONFIG_SOC_RTC_CNTL_TAGMEM_PD_DMA_BUS_WIDTH=128
-CONFIG_SOC_RTCIO_PIN_COUNT=22
-CONFIG_SOC_RTCIO_INPUT_OUTPUT_SUPPORTED=y
-CONFIG_SOC_RTCIO_HOLD_SUPPORTED=y
-CONFIG_SOC_RTCIO_WAKE_SUPPORTED=y
-CONFIG_SOC_LP_IO_CLOCK_IS_INDEPENDENT=y
-CONFIG_SOC_SDM_GROUPS=y
-CONFIG_SOC_SDM_CHANNELS_PER_GROUP=8
+CONFIG_SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM=108
+CONFIG_SOC_SLEEP_SYSTIMER_STALL_WORKAROUND=y
+CONFIG_SOC_SLEEP_TGWDT_STOP_WORKAROUND=y
+CONFIG_SOC_RTCIO_PIN_COUNT=0
+CONFIG_SOC_MPI_MEM_BLOCKS_NUM=4
+CONFIG_SOC_MPI_OPERATIONS_NUM=3
+CONFIG_SOC_RSA_MAX_BIT_LEN=3072
+CONFIG_SOC_SHA_DMA_MAX_BUFFER_SIZE=3968
+CONFIG_SOC_SHA_SUPPORT_DMA=y
+CONFIG_SOC_SHA_SUPPORT_RESUME=y
+CONFIG_SOC_SHA_GDMA=y
+CONFIG_SOC_SHA_SUPPORT_SHA1=y
+CONFIG_SOC_SHA_SUPPORT_SHA224=y
+CONFIG_SOC_SHA_SUPPORT_SHA256=y
+CONFIG_SOC_SDM_GROUPS=1
+CONFIG_SOC_SDM_CHANNELS_PER_GROUP=4
 CONFIG_SOC_SDM_CLK_SUPPORT_APB=y
-CONFIG_SOC_SPI_PERIPH_NUM=3
+CONFIG_SOC_SPI_PERIPH_NUM=2
 CONFIG_SOC_SPI_MAX_CS_NUM=6
 CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE=64
 CONFIG_SOC_SPI_SUPPORT_DDRCLK=y
@@ -222,19 +184,24 @@ CONFIG_SOC_SPI_SUPPORT_SLAVE_HD_VER2=y
 CONFIG_SOC_SPI_SUPPORT_CLK_APB=y
 CONFIG_SOC_SPI_SUPPORT_CLK_XTAL=y
 CONFIG_SOC_SPI_PERIPH_SUPPORT_CONTROL_DUMMY_OUT=y
-CONFIG_SOC_MEMSPI_IS_INDEPENDENT=y
-CONFIG_SOC_SPI_MAX_PRE_DIVIDER=16
-CONFIG_SOC_SPI_SUPPORT_OCT=y
 CONFIG_SOC_SPI_SCT_SUPPORTED=y
 CONFIG_SOC_SPI_SCT_REG_NUM=14
 CONFIG_SOC_SPI_SCT_BUFFER_NUM_MAX=y
 CONFIG_SOC_SPI_SCT_CONF_BITLEN_MAX=0x3FFFA
-CONFIG_SOC_MEMSPI_SRC_FREQ_120M=y
+CONFIG_SOC_MEMSPI_IS_INDEPENDENT=y
+CONFIG_SOC_SPI_MAX_PRE_DIVIDER=16
+CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_WAIT_IDLE=y
+CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_SUSPEND=y
+CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_RESUME=y
+CONFIG_SOC_SPI_MEM_SUPPORT_IDLE_INTR=y
+CONFIG_SOC_SPI_MEM_SUPPORT_SW_SUSPEND=y
+CONFIG_SOC_SPI_MEM_SUPPORT_CHECK_SUS=y
+CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE=y
+CONFIG_SOC_SPI_MEM_SUPPORT_WRAP=y
 CONFIG_SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED=y
 CONFIG_SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED=y
+CONFIG_SOC_MEMSPI_SRC_FREQ_26M_SUPPORTED=y
 CONFIG_SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED=y
-CONFIG_SOC_SPIRAM_SUPPORTED=y
-CONFIG_SOC_SPIRAM_XIP_SUPPORTED=y
 CONFIG_SOC_SYSTIMER_COUNTER_NUM=2
 CONFIG_SOC_SYSTIMER_ALARM_NUM=3
 CONFIG_SOC_SYSTIMER_BIT_WIDTH_LO=32
@@ -243,70 +210,56 @@ CONFIG_SOC_SYSTIMER_FIXED_DIVIDER=y
 CONFIG_SOC_SYSTIMER_INT_LEVEL=y
 CONFIG_SOC_SYSTIMER_ALARM_MISS_COMPENSATE=y
 CONFIG_SOC_TIMER_GROUPS=2
-CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP=2
+CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP=1
 CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH=54
 CONFIG_SOC_TIMER_GROUP_SUPPORT_XTAL=y
 CONFIG_SOC_TIMER_GROUP_SUPPORT_APB=y
-CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS=4
+CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS=2
 CONFIG_SOC_LP_TIMER_BIT_WIDTH_LO=32
 CONFIG_SOC_LP_TIMER_BIT_WIDTH_HI=16
-CONFIG_SOC_TOUCH_SENSOR_VERSION=2
-CONFIG_SOC_TOUCH_SENSOR_NUM=15
-CONFIG_SOC_TOUCH_SUPPORT_SLEEP_WAKEUP=y
-CONFIG_SOC_TOUCH_SUPPORT_WATERPROOF=y
-CONFIG_SOC_TOUCH_SUPPORT_PROX_SENSING=y
-CONFIG_SOC_TOUCH_PROXIMITY_CHANNEL_NUM=3
-CONFIG_SOC_TOUCH_PROXIMITY_MEAS_DONE_SUPPORTED=y
-CONFIG_SOC_TOUCH_SAMPLE_CFG_NUM=1
+CONFIG_SOC_MWDT_SUPPORT_XTAL=y
 CONFIG_SOC_TWAI_CONTROLLER_NUM=1
 CONFIG_SOC_TWAI_CLK_SUPPORT_APB=y
 CONFIG_SOC_TWAI_BRP_MIN=2
 CONFIG_SOC_TWAI_BRP_MAX=16384
 CONFIG_SOC_TWAI_SUPPORTS_RX_STATUS=y
-CONFIG_SOC_UART_NUM=3
-CONFIG_SOC_UART_HP_NUM=3
+CONFIG_SOC_EFUSE_DIS_DOWNLOAD_ICACHE=y
+CONFIG_SOC_EFUSE_DIS_PAD_JTAG=y
+CONFIG_SOC_EFUSE_DIS_USB_JTAG=y
+CONFIG_SOC_EFUSE_DIS_DIRECT_BOOT=y
+CONFIG_SOC_EFUSE_SOFT_DIS_JTAG=y
+CONFIG_SOC_EFUSE_DIS_ICACHE=y
+CONFIG_SOC_EFUSE_BLOCK9_KEY_PURPOSE_QUIRK=y
+CONFIG_SOC_SECURE_BOOT_V2_RSA=y
+CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS=3
+CONFIG_SOC_EFUSE_REVOKE_BOOT_KEY_DIGESTS=y
+CONFIG_SOC_SUPPORT_SECURE_BOOT_REVOKE_KEY=y
+CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX=32
+CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES=y
+CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_128=y
+CONFIG_SOC_MEMPROT_CPU_PREFETCH_PAD_SIZE=16
+CONFIG_SOC_MEMPROT_MEM_ALIGN_SIZE=512
+CONFIG_SOC_UART_NUM=2
+CONFIG_SOC_UART_HP_NUM=2
 CONFIG_SOC_UART_FIFO_LEN=128
 CONFIG_SOC_UART_BITRATE_MAX=5000000
-CONFIG_SOC_UART_SUPPORT_FSM_TX_WAIT_SEND=y
-CONFIG_SOC_UART_SUPPORT_WAKEUP_INT=y
 CONFIG_SOC_UART_SUPPORT_APB_CLK=y
 CONFIG_SOC_UART_SUPPORT_RTC_CLK=y
 CONFIG_SOC_UART_SUPPORT_XTAL_CLK=y
-CONFIG_SOC_USB_OTG_PERIPH_NUM=1
-CONFIG_SOC_SHA_DMA_MAX_BUFFER_SIZE=3968
-CONFIG_SOC_SHA_SUPPORT_DMA=y
-CONFIG_SOC_SHA_SUPPORT_RESUME=y
-CONFIG_SOC_SHA_GDMA=y
-CONFIG_SOC_SHA_SUPPORT_SHA1=y
-CONFIG_SOC_SHA_SUPPORT_SHA224=y
-CONFIG_SOC_SHA_SUPPORT_SHA256=y
-CONFIG_SOC_SHA_SUPPORT_SHA384=y
-CONFIG_SOC_SHA_SUPPORT_SHA512=y
-CONFIG_SOC_SHA_SUPPORT_SHA512_224=y
-CONFIG_SOC_SHA_SUPPORT_SHA512_256=y
-CONFIG_SOC_SHA_SUPPORT_SHA512_T=y
-CONFIG_SOC_MPI_MEM_BLOCKS_NUM=4
-CONFIG_SOC_MPI_OPERATIONS_NUM=3
-CONFIG_SOC_RSA_MAX_BIT_LEN=4096
-CONFIG_SOC_AES_SUPPORT_DMA=y
-CONFIG_SOC_AES_GDMA=y
-CONFIG_SOC_AES_SUPPORT_AES_128=y
-CONFIG_SOC_AES_SUPPORT_AES_256=y
-CONFIG_SOC_PM_SUPPORT_EXT0_WAKEUP=y
-CONFIG_SOC_PM_SUPPORT_EXT1_WAKEUP=y
-CONFIG_SOC_PM_SUPPORT_EXT_WAKEUP=y
+CONFIG_SOC_UART_SUPPORT_WAKEUP_INT=y
+CONFIG_SOC_UART_SUPPORT_FSM_TX_WAIT_SEND=y
+CONFIG_SOC_COEX_HW_PTI=y
+CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE=21
+CONFIG_SOC_MAC_BB_PD_MEM_SIZE=192
+CONFIG_SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH=12
 CONFIG_SOC_PM_SUPPORT_WIFI_WAKEUP=y
 CONFIG_SOC_PM_SUPPORT_BT_WAKEUP=y
-CONFIG_SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP=y
 CONFIG_SOC_PM_SUPPORT_CPU_PD=y
-CONFIG_SOC_PM_SUPPORT_TAGMEM_PD=y
-CONFIG_SOC_PM_SUPPORT_RTC_PERIPH_PD=y
+CONFIG_SOC_PM_SUPPORT_WIFI_PD=y
+CONFIG_SOC_PM_SUPPORT_BT_PD=y
 CONFIG_SOC_PM_SUPPORT_RC_FAST_PD=y
 CONFIG_SOC_PM_SUPPORT_VDDSDIO_PD=y
 CONFIG_SOC_PM_SUPPORT_MAC_BB_PD=y
-CONFIG_SOC_PM_SUPPORT_MODEM_PD=y
-CONFIG_SOC_CONFIGURABLE_VDDSDIO_SUPPORTED=y
-CONFIG_SOC_PM_SUPPORT_DEEPSLEEP_CHECK_STUB_ONLY=y
 CONFIG_SOC_PM_CPU_RETENTION_BY_RTCCNTL=y
 CONFIG_SOC_PM_MODEM_RETENTION_BY_BACKUPDMA=y
 CONFIG_SOC_PM_MODEM_PD_BY_SW=y
@@ -314,46 +267,8 @@ CONFIG_SOC_CLK_RC_FAST_D256_SUPPORTED=y
 CONFIG_SOC_RTC_SLOW_CLK_SUPPORT_RC_FAST_D256=y
 CONFIG_SOC_CLK_RC_FAST_SUPPORT_CALIBRATION=y
 CONFIG_SOC_CLK_XTAL32K_SUPPORTED=y
-CONFIG_SOC_EFUSE_DIS_DOWNLOAD_ICACHE=y
-CONFIG_SOC_EFUSE_DIS_DOWNLOAD_DCACHE=y
-CONFIG_SOC_EFUSE_HARD_DIS_JTAG=y
-CONFIG_SOC_EFUSE_DIS_USB_JTAG=y
-CONFIG_SOC_EFUSE_SOFT_DIS_JTAG=y
-CONFIG_SOC_EFUSE_DIS_DIRECT_BOOT=y
-CONFIG_SOC_EFUSE_DIS_ICACHE=y
-CONFIG_SOC_EFUSE_BLOCK9_KEY_PURPOSE_QUIRK=y
-CONFIG_SOC_SECURE_BOOT_V2_RSA=y
-CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS=3
-CONFIG_SOC_EFUSE_REVOKE_BOOT_KEY_DIGESTS=y
-CONFIG_SOC_SUPPORT_SECURE_BOOT_REVOKE_KEY=y
-CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX=64
-CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES=y
-CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_OPTIONS=y
-CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_128=y
-CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_256=y
-CONFIG_SOC_MEMPROT_CPU_PREFETCH_PAD_SIZE=16
-CONFIG_SOC_MEMPROT_MEM_ALIGN_SIZE=256
-CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE=21
-CONFIG_SOC_MAC_BB_PD_MEM_SIZE=192
-CONFIG_SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH=12
-CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_WAIT_IDLE=y
-CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_SUSPEND=y
-CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_RESUME=y
-CONFIG_SOC_SPI_MEM_SUPPORT_SW_SUSPEND=y
-CONFIG_SOC_SPI_MEM_SUPPORT_OPI_MODE=y
-CONFIG_SOC_SPI_MEM_SUPPORT_TIMING_TUNING=y
-CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE=y
-CONFIG_SOC_SPI_MEM_SUPPORT_WRAP=y
-CONFIG_SOC_MEMSPI_TIMING_TUNING_BY_MSPI_DELAY=y
-CONFIG_SOC_MEMSPI_CORE_CLK_SHARED_WITH_PSRAM=y
-CONFIG_SOC_SPI_MEM_SUPPORT_CACHE_32BIT_ADDR_MAP=y
-CONFIG_SOC_COEX_HW_PTI=y
-CONFIG_SOC_EXTERNAL_COEX_LEADER_TX_LINE=y
-CONFIG_SOC_SDMMC_USE_GPIO_MATRIX=y
-CONFIG_SOC_SDMMC_NUM_SLOTS=2
-CONFIG_SOC_SDMMC_SUPPORT_XTAL_CLOCK=y
-CONFIG_SOC_SDMMC_DELAY_PHASE_NUM=4
 CONFIG_SOC_TEMPERATURE_SENSOR_SUPPORT_FAST_RC=y
+CONFIG_SOC_TEMPERATURE_SENSOR_SUPPORT_XTAL=y
 CONFIG_SOC_WIFI_HW_TSF=y
 CONFIG_SOC_WIFI_FTM_SUPPORT=y
 CONFIG_SOC_WIFI_GCMP_SUPPORT=y
@@ -367,17 +282,16 @@ CONFIG_SOC_BLE_MESH_SUPPORTED=y
 CONFIG_SOC_BLE_50_SUPPORTED=y
 CONFIG_SOC_BLE_DEVICE_PRIVACY_SUPPORTED=y
 CONFIG_SOC_BLUFI_SUPPORTED=y
-CONFIG_SOC_ULP_HAS_ADC=y
 CONFIG_SOC_PHY_COMBO_MODULE=y
 CONFIG_IDF_CMAKE=y
 CONFIG_IDF_TOOLCHAIN="gcc"
 CONFIG_IDF_TOOLCHAIN_GCC=y
-CONFIG_IDF_TARGET_ARCH_XTENSA=y
-CONFIG_IDF_TARGET_ARCH="xtensa"
-CONFIG_IDF_TARGET="esp32s3"
-CONFIG_IDF_INIT_VERSION="5.4.1"
-CONFIG_IDF_TARGET_ESP32S3=y
-CONFIG_IDF_FIRMWARE_CHIP_ID=0x0009
+CONFIG_IDF_TARGET_ARCH_RISCV=y
+CONFIG_IDF_TARGET_ARCH="riscv"
+CONFIG_IDF_TARGET="esp32c3"
+CONFIG_IDF_INIT_VERSION="5.4.2"
+CONFIG_IDF_TARGET_ESP32C3=y
+CONFIG_IDF_FIRMWARE_CHIP_ID=0x0005
 
 #
 # Build type
@@ -434,7 +348,6 @@ CONFIG_BOOTLOADER_LOG_TIMESTAMP_SOURCE_CPU_TICKS=y
 CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y
 # end of Serial Flash Configurations
 
-CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
 # CONFIG_BOOTLOADER_FACTORY_RESET is not set
 # CONFIG_BOOTLOADER_APP_TEST is not set
 CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE=y
@@ -475,13 +388,11 @@ CONFIG_ESP_ROM_HAS_CRC_BE=y
 CONFIG_ESP_ROM_HAS_MZ_CRC32=y
 CONFIG_ESP_ROM_HAS_JPEG_DECODE=y
 CONFIG_ESP_ROM_UART_CLK_IS_XTAL=y
+CONFIG_ESP_ROM_USB_SERIAL_DEVICE_NUM=3
 CONFIG_ESP_ROM_HAS_RETARGETABLE_LOCKING=y
-CONFIG_ESP_ROM_USB_OTG_NUM=3
-CONFIG_ESP_ROM_USB_SERIAL_DEVICE_NUM=4
 CONFIG_ESP_ROM_HAS_ERASE_0_REGION_BUG=y
 CONFIG_ESP_ROM_HAS_ENCRYPTED_WRITES_USING_LEGACY_DRV=y
 CONFIG_ESP_ROM_GET_CLK_FREQ=y
-CONFIG_ESP_ROM_HAS_HAL_WDT=y
 CONFIG_ESP_ROM_NEEDS_SWSETUP_WORKAROUND=y
 CONFIG_ESP_ROM_HAS_LAYOUT_TABLE=y
 CONFIG_ESP_ROM_HAS_SPI_FLASH=y
@@ -491,13 +402,10 @@ CONFIG_ESP_ROM_HAS_NEWLIB_NANO_FORMAT=y
 CONFIG_ESP_ROM_HAS_NEWLIB_32BIT_TIME=y
 CONFIG_ESP_ROM_NEEDS_SET_CACHE_MMU_SIZE=y
 CONFIG_ESP_ROM_RAM_APP_NEEDS_MMU_INIT=y
-CONFIG_ESP_ROM_HAS_FLASH_COUNT_PAGES_BUG=y
-CONFIG_ESP_ROM_HAS_CACHE_SUSPEND_WAITI_BUG=y
-CONFIG_ESP_ROM_HAS_CACHE_WRITEBACK_BUG=y
 CONFIG_ESP_ROM_HAS_SW_FLOAT=y
+CONFIG_ESP_ROM_USB_OTG_NUM=-1
 CONFIG_ESP_ROM_HAS_VERSION=y
 CONFIG_ESP_ROM_SUPPORT_DEEP_SLEEP_WAKEUP_STUB=y
-CONFIG_ESP_ROM_HAS_OUTPUT_PUTC_FUNC=y
 
 #
 # Boot ROM Behavior
@@ -512,29 +420,27 @@ CONFIG_BOOT_ROM_LOG_ALWAYS_ON=y
 # Serial flasher config
 #
 # CONFIG_ESPTOOLPY_NO_STUB is not set
-# CONFIG_ESPTOOLPY_OCT_FLASH is not set
-CONFIG_ESPTOOLPY_FLASH_MODE_AUTO_DETECT=y
-CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
+# CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set
 # CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
-# CONFIG_ESPTOOLPY_FLASHMODE_DIO is not set
+CONFIG_ESPTOOLPY_FLASHMODE_DIO=y
 # CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set
 CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y
 CONFIG_ESPTOOLPY_FLASHMODE="dio"
-# CONFIG_ESPTOOLPY_FLASHFREQ_120M is not set
 CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
 # CONFIG_ESPTOOLPY_FLASHFREQ_40M is not set
+# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set
 # CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set
 CONFIG_ESPTOOLPY_FLASHFREQ="80m"
 # CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set
+CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y
 # CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
-CONFIG_ESPTOOLPY_FLASHSIZE_16MB=y
+# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set
-CONFIG_ESPTOOLPY_FLASHSIZE="16MB"
-CONFIG_ESPTOOLPY_HEADER_FLASHSIZE_UPDATE=y
+CONFIG_ESPTOOLPY_FLASHSIZE="2MB"
+# CONFIG_ESPTOOLPY_HEADER_FLASHSIZE_UPDATE is not set
 CONFIG_ESPTOOLPY_BEFORE_RESET=y
 # CONFIG_ESPTOOLPY_BEFORE_NORESET is not set
 CONFIG_ESPTOOLPY_BEFORE="default_reset"
@@ -547,13 +453,13 @@ CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
 #
 # Partition Table
 #
-# CONFIG_PARTITION_TABLE_SINGLE_APP is not set
+CONFIG_PARTITION_TABLE_SINGLE_APP=y
 # CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set
 # CONFIG_PARTITION_TABLE_TWO_OTA is not set
 # CONFIG_PARTITION_TABLE_TWO_OTA_LARGE is not set
-CONFIG_PARTITION_TABLE_CUSTOM=y
+# CONFIG_PARTITION_TABLE_CUSTOM is not set
 CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
-CONFIG_PARTITION_TABLE_FILENAME="partitions.csv"
+CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv"
 CONFIG_PARTITION_TABLE_OFFSET=0x8000
 CONFIG_PARTITION_TABLE_MD5=y
 # end of Partition Table
@@ -581,6 +487,7 @@ CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
 # CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set
 # CONFIG_COMPILER_NO_MERGE_CONSTANTS is not set
 # CONFIG_COMPILER_WARN_WRITE_STRINGS is not set
+# CONFIG_COMPILER_SAVE_RESTORE_LIBCALLS is not set
 CONFIG_COMPILER_DISABLE_DEFAULT_ERRORS=y
 # CONFIG_COMPILER_DISABLE_GCC12_WARNINGS is not set
 # CONFIG_COMPILER_DISABLE_GCC13_WARNINGS is not set
@@ -603,7 +510,6 @@ CONFIG_COMPILER_ORPHAN_SECTIONS_WARNING=y
 # CONFIG_APPTRACE_DEST_JTAG is not set
 CONFIG_APPTRACE_DEST_NONE=y
 # CONFIG_APPTRACE_DEST_UART1 is not set
-# CONFIG_APPTRACE_DEST_UART2 is not set
 # CONFIG_APPTRACE_DEST_USB_CDC is not set
 CONFIG_APPTRACE_DEST_UART_NONE=y
 CONFIG_APPTRACE_UART_TASK_PRIO=1
@@ -613,345 +519,15 @@ CONFIG_APPTRACE_LOCK_ENABLE=y
 #
 # Bluetooth
 #
-CONFIG_BT_ENABLED=y
-CONFIG_BT_BLUEDROID_ENABLED=y
-# CONFIG_BT_NIMBLE_ENABLED is not set
-# CONFIG_BT_CONTROLLER_ONLY is not set
-CONFIG_BT_CONTROLLER_ENABLED=y
-# CONFIG_BT_CONTROLLER_DISABLED is not set
-
-#
-# Bluedroid Options
-#
-CONFIG_BT_BTC_TASK_STACK_SIZE=3072
-# CONFIG_BT_BLUEDROID_PINNED_TO_CORE_0 is not set
-CONFIG_BT_BLUEDROID_PINNED_TO_CORE_1=y
-CONFIG_BT_BLUEDROID_PINNED_TO_CORE=1
-CONFIG_BT_BTU_TASK_STACK_SIZE=4352
-# CONFIG_BT_BLUEDROID_MEM_DEBUG is not set
-CONFIG_BT_BLUEDROID_ESP_COEX_VSC=y
-CONFIG_BT_BLE_ENABLED=y
-CONFIG_BT_GATTS_ENABLE=y
-CONFIG_BT_GATTS_PPCP_CHAR_GAP=y
-# CONFIG_BT_BLE_BLUFI_ENABLE is not set
-CONFIG_BT_GATT_MAX_SR_PROFILES=8
-CONFIG_BT_GATT_MAX_SR_ATTRIBUTES=100
-# CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MANUAL is not set
-CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_AUTO=y
-CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE=0
-# CONFIG_BT_GATTS_ROBUST_CACHING_ENABLED is not set
-# CONFIG_BT_GATTS_DEVICE_NAME_WRITABLE is not set
-# CONFIG_BT_GATTS_APPEARANCE_WRITABLE is not set
-CONFIG_BT_GATTC_ENABLE=y
-CONFIG_BT_GATTC_MAX_CACHE_CHAR=40
-CONFIG_BT_GATTC_NOTIF_REG_MAX=5
-CONFIG_BT_GATTC_CACHE_NVS_FLASH=y
-CONFIG_BT_GATTC_CONNECT_RETRY_COUNT=3
-CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT=30
-# CONFIG_BT_BLE_SMP_ENABLE is not set
-# CONFIG_BT_STACK_NO_LOG is not set
-
-#
-# BT DEBUG LOG LEVEL
-#
-# CONFIG_BT_LOG_HCI_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_HCI_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_HCI_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_HCI_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_HCI_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_HCI_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_HCI_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_HCI_TRACE_LEVEL=2
-# CONFIG_BT_LOG_BTM_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_BTM_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_BTM_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_BTM_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_BTM_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_BTM_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_BTM_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_BTM_TRACE_LEVEL=2
-# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_L2CAP_TRACE_LEVEL=2
-# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL=2
-# CONFIG_BT_LOG_SDP_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_SDP_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_SDP_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_SDP_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_SDP_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_SDP_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_SDP_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_SDP_TRACE_LEVEL=2
-# CONFIG_BT_LOG_GAP_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_GAP_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_GAP_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_GAP_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_GAP_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_GAP_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_GAP_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_GAP_TRACE_LEVEL=2
-# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_BNEP_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_BNEP_TRACE_LEVEL=2
-# CONFIG_BT_LOG_PAN_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_PAN_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_PAN_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_PAN_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_PAN_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_PAN_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_PAN_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_PAN_TRACE_LEVEL=2
-# CONFIG_BT_LOG_A2D_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_A2D_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_A2D_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_A2D_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_A2D_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_A2D_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_A2D_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_A2D_TRACE_LEVEL=2
-# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_AVDT_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_AVDT_TRACE_LEVEL=2
-# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_AVCT_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_AVCT_TRACE_LEVEL=2
-# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_AVRC_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_AVRC_TRACE_LEVEL=2
-# CONFIG_BT_LOG_MCA_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_MCA_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_MCA_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_MCA_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_MCA_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_MCA_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_MCA_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_MCA_TRACE_LEVEL=2
-# CONFIG_BT_LOG_HID_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_HID_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_HID_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_HID_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_HID_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_HID_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_HID_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_HID_TRACE_LEVEL=2
-# CONFIG_BT_LOG_APPL_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_APPL_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_APPL_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_APPL_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_APPL_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_APPL_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_APPL_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_APPL_TRACE_LEVEL=2
-# CONFIG_BT_LOG_GATT_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_GATT_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_GATT_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_GATT_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_GATT_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_GATT_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_GATT_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_GATT_TRACE_LEVEL=2
-# CONFIG_BT_LOG_SMP_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_SMP_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_SMP_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_SMP_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_SMP_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_SMP_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_SMP_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_SMP_TRACE_LEVEL=2
-# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_BTIF_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_BTIF_TRACE_LEVEL=2
-# CONFIG_BT_LOG_BTC_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_BTC_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_BTC_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_BTC_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_BTC_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_BTC_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_BTC_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_BTC_TRACE_LEVEL=2
-# CONFIG_BT_LOG_OSI_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_OSI_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_OSI_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_OSI_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_OSI_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_OSI_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_OSI_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_OSI_TRACE_LEVEL=2
-# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_BLUFI_TRACE_LEVEL=2
-# end of BT DEBUG LOG LEVEL
-
-CONFIG_BT_ACL_CONNECTIONS=4
-CONFIG_BT_MULTI_CONNECTION_ENBALE=y
-CONFIG_BT_ALLOCATION_FROM_SPIRAM_FIRST=y
-# CONFIG_BT_BLE_DYNAMIC_ENV_MEMORY is not set
-# CONFIG_BT_BLE_ACT_SCAN_REP_ADV_SCAN is not set
-CONFIG_BT_MAX_DEVICE_NAME_LEN=32
-CONFIG_BT_BLE_RPA_TIMEOUT=900
-# CONFIG_BT_BLE_50_FEATURES_SUPPORTED is not set
-CONFIG_BT_BLE_42_FEATURES_SUPPORTED=y
-CONFIG_BT_BLE_42_DTM_TEST_EN=y
-CONFIG_BT_BLE_42_ADV_EN=y
-CONFIG_BT_BLE_42_SCAN_EN=y
-# CONFIG_BT_BLE_HIGH_DUTY_ADV_INTERVAL is not set
-# CONFIG_BT_ABORT_WHEN_ALLOCATION_FAILS is not set
-# end of Bluedroid Options
-
-#
-# Controller Options
-#
-CONFIG_BT_CTRL_MODE_EFF=1
-CONFIG_BT_CTRL_BLE_MAX_ACT=6
-CONFIG_BT_CTRL_BLE_MAX_ACT_EFF=6
-CONFIG_BT_CTRL_BLE_STATIC_ACL_TX_BUF_NB=0
-CONFIG_BT_CTRL_PINNED_TO_CORE_0=y
-# CONFIG_BT_CTRL_PINNED_TO_CORE_1 is not set
-CONFIG_BT_CTRL_PINNED_TO_CORE=0
-CONFIG_BT_CTRL_HCI_MODE_VHCI=y
-# CONFIG_BT_CTRL_HCI_MODE_UART_H4 is not set
-CONFIG_BT_CTRL_HCI_TL=1
-CONFIG_BT_CTRL_ADV_DUP_FILT_MAX=30
-CONFIG_BT_BLE_CCA_MODE_NONE=y
-# CONFIG_BT_BLE_CCA_MODE_HW is not set
-# CONFIG_BT_BLE_CCA_MODE_SW is not set
-CONFIG_BT_BLE_CCA_MODE=0
-CONFIG_BT_CTRL_HW_CCA_VAL=20
-CONFIG_BT_CTRL_HW_CCA_EFF=0
-CONFIG_BT_CTRL_CE_LENGTH_TYPE_ORIG=y
-# CONFIG_BT_CTRL_CE_LENGTH_TYPE_CE is not set
-# CONFIG_BT_CTRL_CE_LENGTH_TYPE_SD is not set
-CONFIG_BT_CTRL_CE_LENGTH_TYPE_EFF=0
-CONFIG_BT_CTRL_TX_ANTENNA_INDEX_0=y
-# CONFIG_BT_CTRL_TX_ANTENNA_INDEX_1 is not set
-CONFIG_BT_CTRL_TX_ANTENNA_INDEX_EFF=0
-CONFIG_BT_CTRL_RX_ANTENNA_INDEX_0=y
-# CONFIG_BT_CTRL_RX_ANTENNA_INDEX_1 is not set
-CONFIG_BT_CTRL_RX_ANTENNA_INDEX_EFF=0
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N24 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N21 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N18 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N15 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N12 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N9 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N6 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N3 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N0 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P3 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P6 is not set
-CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P9=y
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P12 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P15 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P18 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P20 is not set
-CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_EFF=11
-CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
-CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM=100
-CONFIG_BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD=20
-CONFIG_BT_CTRL_BLE_SCAN_DUPL=y
-CONFIG_BT_CTRL_SCAN_DUPL_TYPE_DEVICE=y
-# CONFIG_BT_CTRL_SCAN_DUPL_TYPE_DATA is not set
-# CONFIG_BT_CTRL_SCAN_DUPL_TYPE_DATA_DEVICE is not set
-CONFIG_BT_CTRL_SCAN_DUPL_TYPE=0
-CONFIG_BT_CTRL_SCAN_DUPL_CACHE_SIZE=100
-CONFIG_BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD=0
-# CONFIG_BT_CTRL_BLE_MESH_SCAN_DUPL_EN is not set
-# CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EN is not set
-CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_DIS=y
-CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EFF=0
-
-#
-# MODEM SLEEP Options
-#
-# CONFIG_BT_CTRL_MODEM_SLEEP is not set
-# end of MODEM SLEEP Options
-
-CONFIG_BT_CTRL_SLEEP_MODE_EFF=0
-CONFIG_BT_CTRL_SLEEP_CLOCK_EFF=0
-CONFIG_BT_CTRL_HCI_TL_EFF=1
-# CONFIG_BT_CTRL_AGC_RECORRECT_EN is not set
-# CONFIG_BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX is not set
-# CONFIG_BT_BLE_ADV_DATA_LENGTH_ZERO_AUX is not set
-CONFIG_BT_CTRL_CHAN_ASS_EN=y
-CONFIG_BT_CTRL_LE_PING_EN=y
-
-#
-# BLE disconnects when Instant Passed (0x28) occurs
-#
-# CONFIG_BT_CTRL_BLE_LLCP_CONN_UPDATE is not set
-# CONFIG_BT_CTRL_BLE_LLCP_CHAN_MAP_UPDATE is not set
-# CONFIG_BT_CTRL_BLE_LLCP_PHY_UPDATE is not set
-# end of BLE disconnects when Instant Passed (0x28) occurs
-
-# CONFIG_BT_CTRL_RUN_IN_FLASH_ONLY is not set
-CONFIG_BT_CTRL_DTM_ENABLE=y
-CONFIG_BT_CTRL_BLE_MASTER=y
-# CONFIG_BT_CTRL_BLE_TEST is not set
-CONFIG_BT_CTRL_BLE_SCAN=y
-CONFIG_BT_CTRL_BLE_SECURITY_ENABLE=y
-CONFIG_BT_CTRL_BLE_ADV=y
-# CONFIG_BT_CTRL_CHECK_CONNECT_IND_ACCESS_ADDRESS is not set
-
-#
-# Controller debug log Options (Experimental)
-#
-# end of Controller debug log Options (Experimental)
-# end of Controller Options
+# CONFIG_BT_ENABLED is not set
 
 #
 # Common Options
 #
-CONFIG_BT_ALARM_MAX_NUM=50
 # CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED is not set
 # end of Common Options
-
-# CONFIG_BT_HCI_LOG_DEBUG_EN is not set
 # end of Bluetooth
 
-# CONFIG_BLE_MESH is not set
-
 #
 # Console Library
 #
@@ -982,13 +558,6 @@ CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM=y
 # end of Legacy ADC Calibration Configuration
 # end of Legacy ADC Driver Configuration
 
-#
-# Legacy MCPWM Driver Configurations
-#
-# CONFIG_MCPWM_SUPPRESS_DEPRECATE_WARN is not set
-# CONFIG_MCPWM_SKIP_LEGACY_CONFLICT_CHECK is not set
-# end of Legacy MCPWM Driver Configurations
-
 #
 # Legacy Timer Group Driver Configurations
 #
@@ -1016,13 +585,6 @@ CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM=y
 # CONFIG_I2C_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy I2C Driver Configurations
 
-#
-# Legacy PCNT Driver Configurations
-#
-# CONFIG_PCNT_SUPPRESS_DEPRECATE_WARN is not set
-# CONFIG_PCNT_SKIP_LEGACY_CONFLICT_CHECK is not set
-# end of Legacy PCNT Driver Configurations
-
 #
 # Legacy SDM Driver Configurations
 #
@@ -1065,6 +627,7 @@ CONFIG_ESP_TLS_USE_DS_PERIPHERAL=y
 # CONFIG_ADC_ONESHOT_CTRL_FUNC_IN_IRAM is not set
 # CONFIG_ADC_CONTINUOUS_ISR_IRAM_SAFE is not set
 # CONFIG_ADC_CONTINUOUS_FORCE_USE_ADC2_ON_C3_S3 is not set
+# CONFIG_ADC_ONESHOT_FORCE_USE_ADC2_ON_C3 is not set
 # CONFIG_ADC_ENABLE_DEBUG_LOG is not set
 # end of ADC and ADC Calibration
 
@@ -1072,8 +635,7 @@ CONFIG_ESP_TLS_USE_DS_PERIPHERAL=y
 # Wireless Coexistence
 #
 CONFIG_ESP_COEX_ENABLED=y
-CONFIG_ESP_COEX_SW_COEXIST_ENABLE=y
-# CONFIG_ESP_COEX_POWER_MANAGEMENT is not set
+# CONFIG_ESP_COEX_EXTERNAL_COEXIST_ENABLE is not set
 # CONFIG_ESP_COEX_GPIO_DEBUG is not set
 # end of Wireless Coexistence
 
@@ -1081,7 +643,6 @@ CONFIG_ESP_COEX_SW_COEXIST_ENABLE=y
 # Common ESP-related
 #
 CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
-CONFIG_ESP_ALLOW_BSS_SEG_EXTERNAL_MEMORY=y
 # end of Common ESP-related
 
 #
@@ -1121,22 +682,6 @@ CONFIG_GPTIMER_OBJ_CACHE_SAFE=y
 # CONFIG_LEDC_CTRL_FUNC_IN_IRAM is not set
 # end of ESP-Driver:LEDC Configurations
 
-#
-# ESP-Driver:MCPWM Configurations
-#
-# CONFIG_MCPWM_ISR_IRAM_SAFE is not set
-# CONFIG_MCPWM_CTRL_FUNC_IN_IRAM is not set
-# CONFIG_MCPWM_ENABLE_DEBUG_LOG is not set
-# end of ESP-Driver:MCPWM Configurations
-
-#
-# ESP-Driver:PCNT Configurations
-#
-# CONFIG_PCNT_CTRL_FUNC_IN_IRAM is not set
-# CONFIG_PCNT_ISR_IRAM_SAFE is not set
-# CONFIG_PCNT_ENABLE_DEBUG_LOG is not set
-# end of ESP-Driver:PCNT Configurations
-
 #
 # ESP-Driver:RMT Configurations
 #
@@ -1161,14 +706,6 @@ CONFIG_SPI_MASTER_ISR_IN_IRAM=y
 CONFIG_SPI_SLAVE_ISR_IN_IRAM=y
 # end of ESP-Driver:SPI Configurations
 
-#
-# ESP-Driver:Touch Sensor Configurations
-#
-# CONFIG_TOUCH_CTRL_FUNC_IN_IRAM is not set
-# CONFIG_TOUCH_ISR_IRAM_SAFE is not set
-# CONFIG_TOUCH_ENABLE_DEBUG_LOG is not set
-# end of ESP-Driver:Touch Sensor Configurations
-
 #
 # ESP-Driver:Temperature Sensor Configurations
 #
@@ -1268,22 +805,25 @@ CONFIG_ESP_HTTPS_SERVER_EVENT_POST_TIMEOUT=2000
 #
 # Chip revision
 #
-CONFIG_ESP32S3_REV_MIN_0=y
-# CONFIG_ESP32S3_REV_MIN_1 is not set
-# CONFIG_ESP32S3_REV_MIN_2 is not set
-CONFIG_ESP32S3_REV_MIN_FULL=0
-CONFIG_ESP_REV_MIN_FULL=0
+# CONFIG_ESP32C3_REV_MIN_0 is not set
+# CONFIG_ESP32C3_REV_MIN_1 is not set
+# CONFIG_ESP32C3_REV_MIN_2 is not set
+CONFIG_ESP32C3_REV_MIN_3=y
+# CONFIG_ESP32C3_REV_MIN_4 is not set
+# CONFIG_ESP32C3_REV_MIN_101 is not set
+CONFIG_ESP32C3_REV_MIN_FULL=3
+CONFIG_ESP_REV_MIN_FULL=3
 
 #
-# Maximum Supported ESP32-S3 Revision (Rev v0.99)
+# Maximum Supported ESP32-C3 Revision (Rev v1.99)
 #
-CONFIG_ESP32S3_REV_MAX_FULL=99
-CONFIG_ESP_REV_MAX_FULL=99
+CONFIG_ESP32C3_REV_MAX_FULL=199
+CONFIG_ESP_REV_MAX_FULL=199
 CONFIG_ESP_EFUSE_BLOCK_REV_MIN_FULL=0
 CONFIG_ESP_EFUSE_BLOCK_REV_MAX_FULL=199
 
 #
-# Maximum Supported ESP32-S3 eFuse Block Revision (eFuse Block Rev v1.99)
+# Maximum Supported ESP32-C3 eFuse Block Revision (eFuse Block Rev v1.99)
 #
 # end of Chip revision
 
@@ -1296,21 +836,20 @@ CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
 CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
 CONFIG_ESP_MAC_UNIVERSAL_MAC_ADDRESSES_FOUR=y
 CONFIG_ESP_MAC_UNIVERSAL_MAC_ADDRESSES=4
-# CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES_TWO is not set
-CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES_FOUR=y
-CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES=4
+# CONFIG_ESP32C3_UNIVERSAL_MAC_ADDRESSES_TWO is not set
+CONFIG_ESP32C3_UNIVERSAL_MAC_ADDRESSES_FOUR=y
+CONFIG_ESP32C3_UNIVERSAL_MAC_ADDRESSES=4
 # CONFIG_ESP_MAC_USE_CUSTOM_MAC_AS_BASE_MAC is not set
 # end of MAC Config
 
 #
 # Sleep Config
 #
+# CONFIG_ESP_SLEEP_POWER_DOWN_FLASH is not set
 CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND=y
-CONFIG_ESP_SLEEP_PSRAM_LEAKAGE_WORKAROUND=y
-CONFIG_ESP_SLEEP_MSPI_NEED_ALL_IO_PU=y
-CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND=y
+# CONFIG_ESP_SLEEP_MSPI_NEED_ALL_IO_PU is not set
 CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND=y
-CONFIG_ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY=2000
+CONFIG_ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY=0
 # CONFIG_ESP_SLEEP_CACHE_SAFE_ASSERTION is not set
 # CONFIG_ESP_SLEEP_DEBUG is not set
 CONFIG_ESP_SLEEP_GPIO_ENABLE_INTERNAL_RESISTORS=y
@@ -1329,7 +868,7 @@ CONFIG_RTC_CLK_CAL_CYCLES=1024
 #
 # Peripheral Control
 #
-CONFIG_PERIPH_CTRL_FUNC_IN_IRAM=y
+# CONFIG_PERIPH_CTRL_FUNC_IN_IRAM is not set
 # end of Peripheral Control
 
 #
@@ -1356,14 +895,11 @@ CONFIG_ESP_SPI_BUS_LOCK_ISR_FUNCS_IN_IRAM=y
 # ESP-Driver:LCD Controller Configurations
 #
 # CONFIG_LCD_ENABLE_DEBUG_LOG is not set
-# CONFIG_LCD_RGB_ISR_IRAM_SAFE is not set
-# CONFIG_LCD_RGB_RESTART_IN_VSYNC is not set
 # end of ESP-Driver:LCD Controller Configurations
 
 #
 # ESP-MM: Memory Management Configurations
 #
-# CONFIG_ESP_MM_CACHE_MSYNC_C2M_CHUNKED_OPS is not set
 # end of ESP-MM: Memory Management Configurations
 
 #
@@ -1411,43 +947,11 @@ CONFIG_ESP_PHY_CALIBRATION_MODE=0
 # CONFIG_PM_ENABLE is not set
 # CONFIG_PM_SLP_IRAM_OPT is not set
 CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP=y
-CONFIG_PM_RESTORE_CACHE_TAGMEM_AFTER_LIGHT_SLEEP=y
 # end of Power Management
 
 #
 # ESP PSRAM
 #
-CONFIG_SPIRAM=y
-
-#
-# SPI RAM config
-#
-# CONFIG_SPIRAM_MODE_QUAD is not set
-CONFIG_SPIRAM_MODE_OCT=y
-# CONFIG_SPIRAM_TYPE_AUTO is not set
-CONFIG_SPIRAM_TYPE_ESPPSRAM64=y
-CONFIG_SPIRAM_CLK_IO=30
-CONFIG_SPIRAM_CS_IO=26
-# CONFIG_SPIRAM_XIP_FROM_PSRAM is not set
-CONFIG_SPIRAM_FETCH_INSTRUCTIONS=y
-CONFIG_SPIRAM_RODATA=y
-CONFIG_SPIRAM_SPEED_80M=y
-# CONFIG_SPIRAM_SPEED_40M is not set
-CONFIG_SPIRAM_SPEED=80
-CONFIG_SPIRAM_ECC_ENABLE=y
-CONFIG_SPIRAM_BOOT_INIT=y
-CONFIG_SPIRAM_PRE_CONFIGURE_MEMORY_PROTECTION=y
-# CONFIG_SPIRAM_USE_MEMMAP is not set
-# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
-CONFIG_SPIRAM_USE_MALLOC=y
-CONFIG_SPIRAM_MEMTEST=y
-CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL=16384
-CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP=y
-CONFIG_SPIRAM_MALLOC_RESERVE_INTERNAL=32768
-CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY=y
-CONFIG_SPIRAM_ALLOW_NOINIT_SEG_EXTERNAL_MEMORY=y
-# end of SPI RAM config
-# end of ESP PSRAM
 
 #
 # ESP Ringbuf
@@ -1465,55 +969,16 @@ CONFIG_SPIRAM_ALLOW_NOINIT_SEG_EXTERNAL_MEMORY=y
 #
 # CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_80 is not set
 CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160=y
-# CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_240 is not set
 CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ=160
-
-#
-# Cache config
-#
-CONFIG_ESP32S3_INSTRUCTION_CACHE_16KB=y
-# CONFIG_ESP32S3_INSTRUCTION_CACHE_32KB is not set
-CONFIG_ESP32S3_INSTRUCTION_CACHE_SIZE=0x4000
-# CONFIG_ESP32S3_INSTRUCTION_CACHE_4WAYS is not set
-CONFIG_ESP32S3_INSTRUCTION_CACHE_8WAYS=y
-CONFIG_ESP32S3_ICACHE_ASSOCIATED_WAYS=8
-# CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_16B is not set
-CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_32B=y
-CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_SIZE=32
-# CONFIG_ESP32S3_DATA_CACHE_16KB is not set
-CONFIG_ESP32S3_DATA_CACHE_32KB=y
-# CONFIG_ESP32S3_DATA_CACHE_64KB is not set
-CONFIG_ESP32S3_DATA_CACHE_SIZE=0x8000
-# CONFIG_ESP32S3_DATA_CACHE_4WAYS is not set
-CONFIG_ESP32S3_DATA_CACHE_8WAYS=y
-CONFIG_ESP32S3_DCACHE_ASSOCIATED_WAYS=8
-# CONFIG_ESP32S3_DATA_CACHE_LINE_16B is not set
-CONFIG_ESP32S3_DATA_CACHE_LINE_32B=y
-# CONFIG_ESP32S3_DATA_CACHE_LINE_64B is not set
-CONFIG_ESP32S3_DATA_CACHE_LINE_SIZE=32
-# end of Cache config
-
-#
-# Memory
-#
-# CONFIG_ESP32S3_RTCDATA_IN_FAST_MEM is not set
-# CONFIG_ESP32S3_USE_FIXED_STATIC_RAM_SIZE is not set
-# end of Memory
-
-#
-# Trace memory
-#
-# CONFIG_ESP32S3_TRAX is not set
-CONFIG_ESP32S3_TRACEMEM_RESERVE_DRAM=0x0
-# end of Trace memory
-
 # CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set
 CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y
 # CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
 # CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set
 CONFIG_ESP_SYSTEM_PANIC_REBOOT_DELAY_SECONDS=0
+CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE=y
 CONFIG_ESP_SYSTEM_RTC_FAST_MEM_AS_HEAP_DEPCHECK=y
 CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP=y
+# CONFIG_ESP_SYSTEM_USE_EH_FRAME is not set
 
 #
 # Memory protection
@@ -1526,12 +991,10 @@ CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
 CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304
 CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
 CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y
-# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set
 # CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set
 CONFIG_ESP_MAIN_TASK_AFFINITY=0x0
 CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048
 CONFIG_ESP_CONSOLE_UART_DEFAULT=y
-# CONFIG_ESP_CONSOLE_USB_CDC is not set
 # CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG is not set
 # CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
 # CONFIG_ESP_CONSOLE_NONE is not set
@@ -1544,13 +1007,11 @@ CONFIG_ESP_CONSOLE_ROM_SERIAL_PORT_NUM=0
 CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
 CONFIG_ESP_INT_WDT=y
 CONFIG_ESP_INT_WDT_TIMEOUT_MS=300
-CONFIG_ESP_INT_WDT_CHECK_CPU1=y
 CONFIG_ESP_TASK_WDT_EN=y
 CONFIG_ESP_TASK_WDT_INIT=y
 # CONFIG_ESP_TASK_WDT_PANIC is not set
 CONFIG_ESP_TASK_WDT_TIMEOUT_S=5
 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
-CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
 # CONFIG_ESP_PANIC_HANDLER_IRAM is not set
 # CONFIG_ESP_DEBUG_STUBS_ENABLE is not set
 CONFIG_ESP_DEBUG_OCDAWARE=y
@@ -1566,20 +1027,18 @@ CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7=y
 # CONFIG_ESP_BROWNOUT_DET_LVL_SEL_4 is not set
 # CONFIG_ESP_BROWNOUT_DET_LVL_SEL_3 is not set
 # CONFIG_ESP_BROWNOUT_DET_LVL_SEL_2 is not set
-# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_1 is not set
 CONFIG_ESP_BROWNOUT_DET_LVL=7
 # end of Brownout Detector
 
 CONFIG_ESP_SYSTEM_BROWNOUT_INTR=y
-CONFIG_ESP_SYSTEM_BBPLL_RECALIB=y
+CONFIG_ESP_SYSTEM_HW_STACK_GUARD=y
+CONFIG_ESP_SYSTEM_HW_PC_RECORD=y
 # end of ESP System Settings
 
 #
 # IPC (Inter-Processor Call)
 #
-CONFIG_ESP_IPC_TASK_STACK_SIZE=1280
-CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y
-CONFIG_ESP_IPC_ISR_ENABLE=y
+CONFIG_ESP_IPC_TASK_STACK_SIZE=1024
 # end of IPC (Inter-Processor Call)
 
 #
@@ -1604,10 +1063,10 @@ CONFIG_ESP_TIMER_IMPL_SYSTIMER=y
 CONFIG_ESP_WIFI_ENABLED=y
 CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=10
 CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM=32
-CONFIG_ESP_WIFI_STATIC_TX_BUFFER=y
-CONFIG_ESP_WIFI_TX_BUFFER_TYPE=0
-CONFIG_ESP_WIFI_STATIC_TX_BUFFER_NUM=16
-CONFIG_ESP_WIFI_CACHE_TX_BUFFER_NUM=32
+# CONFIG_ESP_WIFI_STATIC_TX_BUFFER is not set
+CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER=y
+CONFIG_ESP_WIFI_TX_BUFFER_TYPE=1
+CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM=32
 CONFIG_ESP_WIFI_STATIC_RX_MGMT_BUFFER=y
 # CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUFFER is not set
 CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUF=0
@@ -1617,10 +1076,7 @@ CONFIG_ESP_WIFI_AMPDU_TX_ENABLED=y
 CONFIG_ESP_WIFI_TX_BA_WIN=6
 CONFIG_ESP_WIFI_AMPDU_RX_ENABLED=y
 CONFIG_ESP_WIFI_RX_BA_WIN=6
-# CONFIG_ESP_WIFI_AMSDU_TX_ENABLED is not set
 CONFIG_ESP_WIFI_NVS_ENABLED=y
-CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_0=y
-# CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_1 is not set
 CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN=752
 CONFIG_ESP_WIFI_MGMT_SBUF_NUM=32
 CONFIG_ESP_WIFI_IRAM_OPT=y
@@ -1707,7 +1163,6 @@ CONFIG_FATFS_CODEPAGE=437
 CONFIG_FATFS_FS_LOCK=0
 CONFIG_FATFS_TIMEOUT_MS=10000
 CONFIG_FATFS_PER_FILE_CACHE=y
-CONFIG_FATFS_ALLOC_PREFER_EXTRAM=y
 # CONFIG_FATFS_USE_FASTSEEK is not set
 CONFIG_FATFS_USE_STRFUNC_NONE=y
 # CONFIG_FATFS_USE_STRFUNC_WITHOUT_CRLF_CONV is not set
@@ -1734,8 +1189,9 @@ CONFIG_FATFS_DONT_TRUST_LAST_ALLOC=0
 # Kernel
 #
 # CONFIG_FREERTOS_SMP is not set
-# CONFIG_FREERTOS_UNICORE is not set
+CONFIG_FREERTOS_UNICORE=y
 CONFIG_FREERTOS_HZ=100
+CONFIG_FREERTOS_OPTIMIZED_SCHEDULER=y
 # CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set
 # CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set
 CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y
@@ -1748,7 +1204,6 @@ CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16
 CONFIG_FREERTOS_USE_TIMERS=y
 CONFIG_FREERTOS_TIMER_SERVICE_TASK_NAME="Tmr Svc"
 # CONFIG_FREERTOS_TIMER_TASK_AFFINITY_CPU0 is not set
-# CONFIG_FREERTOS_TIMER_TASK_AFFINITY_CPU1 is not set
 CONFIG_FREERTOS_TIMER_TASK_NO_AFFINITY=y
 CONFIG_FREERTOS_TIMER_SERVICE_TASK_CORE_AFFINITY=0x7FFFFFFF
 CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1
@@ -1773,7 +1228,6 @@ CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS=y
 CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
 CONFIG_FREERTOS_ISR_STACKSIZE=1536
 CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y
-# CONFIG_FREERTOS_FPU_IN_ISR is not set
 CONFIG_FREERTOS_TICK_SUPPORT_SYSTIMER=y
 CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL1=y
 # CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL3 is not set
@@ -1785,7 +1239,6 @@ CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER=y
 #
 # Extra
 #
-CONFIG_FREERTOS_TASK_CREATE_ALLOW_EXT_MEM=y
 # end of Extra
 
 CONFIG_FREERTOS_PORT=y
@@ -1794,7 +1247,7 @@ CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
 CONFIG_FREERTOS_DEBUG_OCDAWARE=y
 CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT=y
 CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH=y
-CONFIG_FREERTOS_NUMBER_OF_CORES=2
+CONFIG_FREERTOS_NUMBER_OF_CORES=1
 # end of FreeRTOS
 
 #
@@ -1805,7 +1258,6 @@ CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y
 # CONFIG_HAL_ASSERTION_SILENT is not set
 # CONFIG_HAL_ASSERTION_ENABLE is not set
 CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
-CONFIG_HAL_WDT_USE_ROM_IMPL=y
 CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM=y
 CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM=y
 # end of Hardware Abstraction Layer (HAL) and Low Level (LL)
@@ -1909,7 +1361,7 @@ CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y
 # CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set
 CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y
 # CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set
-CONFIG_LWIP_DHCP_OPTIONS_LEN=69
+CONFIG_LWIP_DHCP_OPTIONS_LEN=68
 CONFIG_LWIP_NUM_NETIF_CLIENT_DATA=0
 CONFIG_LWIP_DHCP_COARSE_TIMER_SECS=1
 
@@ -1956,7 +1408,6 @@ CONFIG_LWIP_TCP_OOSEQ_MAX_PBUFS=4
 CONFIG_LWIP_TCP_OVERSIZE_MSS=y
 # CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set
 # CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set
-# CONFIG_LWIP_WND_SCALE is not set
 CONFIG_LWIP_TCP_RTO_TIME=1500
 # end of TCP
 
@@ -1978,7 +1429,6 @@ CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y
 CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072
 CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
 # CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set
-# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set
 CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF
 CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
 CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
@@ -2056,7 +1506,6 @@ CONFIG_LWIP_HOOK_IP6_INPUT_DEFAULT=y
 # mbedTLS
 #
 CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
-# CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC is not set
 # CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set
 # CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set
 CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y
@@ -2095,7 +1544,7 @@ CONFIG_MBEDTLS_AES_USE_INTERRUPT=y
 CONFIG_MBEDTLS_AES_INTERRUPT_LEVEL=0
 CONFIG_MBEDTLS_GCM_SUPPORT_NON_AES_CIPHER=y
 CONFIG_MBEDTLS_HARDWARE_MPI=y
-# CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI is not set
+CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI=y
 CONFIG_MBEDTLS_MPI_USE_INTERRUPT=y
 CONFIG_MBEDTLS_MPI_INTERRUPT_LEVEL=0
 CONFIG_MBEDTLS_HARDWARE_SHA=y
@@ -2223,15 +1672,12 @@ CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT=y
 # CONFIG_NEWLIB_TIME_SYSCALL_USE_NONE is not set
 # end of Newlib
 
-CONFIG_STDATOMIC_S32C1I_SPIRAM_WORKAROUND=y
-
 #
 # NVS
 #
 # CONFIG_NVS_ENCRYPTION is not set
 # CONFIG_NVS_ASSERT_ERROR_CHECK is not set
 # CONFIG_NVS_LEGACY_DUP_KEYS_COMPATIBILITY is not set
-CONFIG_NVS_ALLOCATE_CACHE_IN_SPIRAM=y
 # end of NVS
 
 #
@@ -2261,9 +1707,6 @@ CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_PATCH_VERSION=y
 CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5
 CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
 CONFIG_PTHREAD_STACK_MIN=768
-CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY=y
-# CONFIG_PTHREAD_DEFAULT_CORE_0 is not set
-# CONFIG_PTHREAD_DEFAULT_CORE_1 is not set
 CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1
 CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread"
 # end of PThreads
@@ -2294,12 +1737,6 @@ CONFIG_SPI_FLASH_BROWNOUT_RESET=y
 #
 # Features here require specific hardware (READ DOCS FIRST!)
 #
-# CONFIG_SPI_FLASH_HPM_ENA is not set
-CONFIG_SPI_FLASH_HPM_AUTO=y
-# CONFIG_SPI_FLASH_HPM_DIS is not set
-CONFIG_SPI_FLASH_HPM_ON=y
-CONFIG_SPI_FLASH_HPM_DC_AUTO=y
-# CONFIG_SPI_FLASH_HPM_DC_DISABLE is not set
 # CONFIG_SPI_FLASH_AUTO_SUSPEND is not set
 CONFIG_SPI_FLASH_SUSPEND_TSUS_VAL_US=50
 # CONFIG_SPI_FLASH_FORCE_ENABLE_XMC_C_SUSPEND is not set
@@ -2342,7 +1779,6 @@ CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y
 CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y
 CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP=y
 CONFIG_SPI_FLASH_SUPPORT_TH_CHIP=y
-CONFIG_SPI_FLASH_SUPPORT_MXIC_OPI_CHIP=y
 # end of Auto-detect flash chips
 
 CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y
@@ -2397,17 +1833,6 @@ CONFIG_WS_BUFFER_SIZE=1024
 # end of Websocket
 # end of TCP Transport
 
-#
-# Ultra Low Power (ULP) Co-processor
-#
-# CONFIG_ULP_COPROC_ENABLED is not set
-
-#
-# ULP Debugging Options
-#
-# end of ULP Debugging Options
-# end of Ultra Low Power (ULP) Co-processor
-
 #
 # Unity unit testing library
 #
@@ -2420,34 +1845,6 @@ CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y
 # CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set
 # end of Unity unit testing library
 
-#
-# USB-OTG
-#
-CONFIG_USB_HOST_CONTROL_TRANSFER_MAX_SIZE=256
-CONFIG_USB_HOST_HW_BUFFER_BIAS_BALANCED=y
-# CONFIG_USB_HOST_HW_BUFFER_BIAS_IN is not set
-# CONFIG_USB_HOST_HW_BUFFER_BIAS_PERIODIC_OUT is not set
-
-#
-# Hub Driver Configuration
-#
-
-#
-# Root Port configuration
-#
-CONFIG_USB_HOST_DEBOUNCE_DELAY_MS=250
-CONFIG_USB_HOST_RESET_HOLD_MS=30
-CONFIG_USB_HOST_RESET_RECOVERY_MS=30
-CONFIG_USB_HOST_SET_ADDR_RECOVERY_MS=10
-# end of Root Port configuration
-
-# CONFIG_USB_HOST_HUBS_SUPPORTED is not set
-# end of Hub Driver Configuration
-
-# CONFIG_USB_HOST_ENABLE_ENUM_FILTER_CALLBACK is not set
-CONFIG_USB_OTG_SUPPORTED=y
-# end of USB-OTG
-
 #
 # Virtual file system
 #
@@ -2481,10 +1878,6 @@ CONFIG_WL_SECTOR_SIZE=4096
 #
 CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16
 CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
-# CONFIG_WIFI_PROV_BLE_BONDING is not set
-# CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION is not set
-# CONFIG_WIFI_PROV_BLE_NOTIFY is not set
-# CONFIG_WIFI_PROV_KEEP_BLE_ON_AFTER_PROV is not set
 CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN=y
 # CONFIG_WIFI_PROV_STA_FAST_SCAN is not set
 # end of Wi-Fi Provisioning Manager
@@ -2503,18 +1896,7 @@ CONFIG_CU_DIAGNOSTICS_COLOR_ALWAYS=y
 #
 # JPEG Decoder
 #
-# CONFIG_JD_USE_ROM is not set
-CONFIG_JD_SZBUF=512
-CONFIG_JD_FORMAT=0
-CONFIG_JD_FORMAT_RGB888=y
-# CONFIG_JD_FORMAT_RGB565 is not set
-CONFIG_JD_USE_SCALE=y
-CONFIG_JD_TBLCLIP=y
-CONFIG_JD_FASTDECODE=2
-# CONFIG_JD_FASTDECODE_BASIC is not set
-# CONFIG_JD_FASTDECODE_32BIT is not set
-CONFIG_JD_FASTDECODE_TABLE=y
-# CONFIG_JD_DEFAULT_HUFFMAN is not set
+CONFIG_JD_USE_ROM=y
 # end of JPEG Decoder
 
 #
@@ -2554,7 +1936,7 @@ CONFIG_LV_COLOR_CHROMA_KEY_HEX=0x00FF00
 # Memory settings
 #
 # CONFIG_LV_MEM_CUSTOM is not set
-CONFIG_LV_MEM_SIZE_KILOBYTES=64
+CONFIG_LV_MEM_SIZE_KILOBYTES=32
 CONFIG_LV_MEM_ADDR=0x0
 CONFIG_LV_MEM_BUF_MAX_NUM=16
 # CONFIG_LV_MEMCPY_MEMSET_STD is not set
@@ -2712,7 +2094,7 @@ CONFIG_LV_USE_FONT_PLACEHOLDER=y
 #
 CONFIG_LV_TXT_ENC_UTF8=y
 # CONFIG_LV_TXT_ENC_ASCII is not set
-CONFIG_LV_TXT_BREAK_CHARS=" ,.;:-_)}"
+CONFIG_LV_TXT_BREAK_CHARS=" ,.;:-_"
 CONFIG_LV_TXT_LINE_BREAK_LONG_LEN=0
 CONFIG_LV_TXT_COLOR_CMD="#"
 # CONFIG_LV_USE_BIDI is not set
@@ -2809,7 +2191,7 @@ CONFIG_LV_USE_GRID=y
 #
 # Others
 #
-# CONFIG_LV_USE_SNAPSHOT is not set
+CONFIG_LV_USE_SNAPSHOT=y
 # CONFIG_LV_USE_MONKEY is not set
 # CONFIG_LV_USE_GRIDNAV is not set
 # CONFIG_LV_USE_FRAGMENT is not set
@@ -2850,9 +2232,9 @@ CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
 CONFIG_LOG_BOOTLOADER_LEVEL=3
 # CONFIG_APP_ROLLBACK_ENABLE is not set
 # CONFIG_FLASH_ENCRYPTION_ENABLED is not set
-CONFIG_FLASHMODE_QIO=y
+# CONFIG_FLASHMODE_QIO is not set
 # CONFIG_FLASHMODE_QOUT is not set
-# CONFIG_FLASHMODE_DIO is not set
+CONFIG_FLASHMODE_DIO=y
 # CONFIG_FLASHMODE_DOUT is not set
 CONFIG_MONITOR_BAUD=115200
 CONFIG_OPTIMIZATION_LEVEL_DEBUG=y
@@ -2873,203 +2255,21 @@ CONFIG_STACK_CHECK_NONE=y
 # CONFIG_ESP32_APPTRACE_DEST_TRAX is not set
 CONFIG_ESP32_APPTRACE_DEST_NONE=y
 CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
-CONFIG_BLUEDROID_ENABLED=y
-# CONFIG_NIMBLE_ENABLED is not set
-CONFIG_BTC_TASK_STACK_SIZE=3072
-# CONFIG_BLUEDROID_PINNED_TO_CORE_0 is not set
-CONFIG_BLUEDROID_PINNED_TO_CORE_1=y
-CONFIG_BLUEDROID_PINNED_TO_CORE=1
-CONFIG_BTU_TASK_STACK_SIZE=4352
-# CONFIG_BLUEDROID_MEM_DEBUG is not set
-CONFIG_GATTS_ENABLE=y
-# CONFIG_GATTS_SEND_SERVICE_CHANGE_MANUAL is not set
-CONFIG_GATTS_SEND_SERVICE_CHANGE_AUTO=y
-CONFIG_GATTS_SEND_SERVICE_CHANGE_MODE=0
-CONFIG_GATTC_ENABLE=y
-CONFIG_GATTC_CACHE_NVS_FLASH=y
-CONFIG_BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT=30
-# CONFIG_BLE_SMP_ENABLE is not set
-# CONFIG_HCI_TRACE_LEVEL_NONE is not set
-# CONFIG_HCI_TRACE_LEVEL_ERROR is not set
-CONFIG_HCI_TRACE_LEVEL_WARNING=y
-# CONFIG_HCI_TRACE_LEVEL_API is not set
-# CONFIG_HCI_TRACE_LEVEL_EVENT is not set
-# CONFIG_HCI_TRACE_LEVEL_DEBUG is not set
-# CONFIG_HCI_TRACE_LEVEL_VERBOSE is not set
-CONFIG_HCI_INITIAL_TRACE_LEVEL=2
-# CONFIG_BTM_TRACE_LEVEL_NONE is not set
-# CONFIG_BTM_TRACE_LEVEL_ERROR is not set
-CONFIG_BTM_TRACE_LEVEL_WARNING=y
-# CONFIG_BTM_TRACE_LEVEL_API is not set
-# CONFIG_BTM_TRACE_LEVEL_EVENT is not set
-# CONFIG_BTM_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BTM_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BTM_INITIAL_TRACE_LEVEL=2
-# CONFIG_L2CAP_TRACE_LEVEL_NONE is not set
-# CONFIG_L2CAP_TRACE_LEVEL_ERROR is not set
-CONFIG_L2CAP_TRACE_LEVEL_WARNING=y
-# CONFIG_L2CAP_TRACE_LEVEL_API is not set
-# CONFIG_L2CAP_TRACE_LEVEL_EVENT is not set
-# CONFIG_L2CAP_TRACE_LEVEL_DEBUG is not set
-# CONFIG_L2CAP_TRACE_LEVEL_VERBOSE is not set
-CONFIG_L2CAP_INITIAL_TRACE_LEVEL=2
-# CONFIG_RFCOMM_TRACE_LEVEL_NONE is not set
-# CONFIG_RFCOMM_TRACE_LEVEL_ERROR is not set
-CONFIG_RFCOMM_TRACE_LEVEL_WARNING=y
-# CONFIG_RFCOMM_TRACE_LEVEL_API is not set
-# CONFIG_RFCOMM_TRACE_LEVEL_EVENT is not set
-# CONFIG_RFCOMM_TRACE_LEVEL_DEBUG is not set
-# CONFIG_RFCOMM_TRACE_LEVEL_VERBOSE is not set
-CONFIG_RFCOMM_INITIAL_TRACE_LEVEL=2
-# CONFIG_SDP_TRACE_LEVEL_NONE is not set
-# CONFIG_SDP_TRACE_LEVEL_ERROR is not set
-CONFIG_SDP_TRACE_LEVEL_WARNING=y
-# CONFIG_SDP_TRACE_LEVEL_API is not set
-# CONFIG_SDP_TRACE_LEVEL_EVENT is not set
-# CONFIG_SDP_TRACE_LEVEL_DEBUG is not set
-# CONFIG_SDP_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BTH_LOG_SDP_INITIAL_TRACE_LEVEL=2
-# CONFIG_GAP_TRACE_LEVEL_NONE is not set
-# CONFIG_GAP_TRACE_LEVEL_ERROR is not set
-CONFIG_GAP_TRACE_LEVEL_WARNING=y
-# CONFIG_GAP_TRACE_LEVEL_API is not set
-# CONFIG_GAP_TRACE_LEVEL_EVENT is not set
-# CONFIG_GAP_TRACE_LEVEL_DEBUG is not set
-# CONFIG_GAP_TRACE_LEVEL_VERBOSE is not set
-CONFIG_GAP_INITIAL_TRACE_LEVEL=2
-CONFIG_BNEP_INITIAL_TRACE_LEVEL=2
-# CONFIG_PAN_TRACE_LEVEL_NONE is not set
-# CONFIG_PAN_TRACE_LEVEL_ERROR is not set
-CONFIG_PAN_TRACE_LEVEL_WARNING=y
-# CONFIG_PAN_TRACE_LEVEL_API is not set
-# CONFIG_PAN_TRACE_LEVEL_EVENT is not set
-# CONFIG_PAN_TRACE_LEVEL_DEBUG is not set
-# CONFIG_PAN_TRACE_LEVEL_VERBOSE is not set
-CONFIG_PAN_INITIAL_TRACE_LEVEL=2
-# CONFIG_A2D_TRACE_LEVEL_NONE is not set
-# CONFIG_A2D_TRACE_LEVEL_ERROR is not set
-CONFIG_A2D_TRACE_LEVEL_WARNING=y
-# CONFIG_A2D_TRACE_LEVEL_API is not set
-# CONFIG_A2D_TRACE_LEVEL_EVENT is not set
-# CONFIG_A2D_TRACE_LEVEL_DEBUG is not set
-# CONFIG_A2D_TRACE_LEVEL_VERBOSE is not set
-CONFIG_A2D_INITIAL_TRACE_LEVEL=2
-# CONFIG_AVDT_TRACE_LEVEL_NONE is not set
-# CONFIG_AVDT_TRACE_LEVEL_ERROR is not set
-CONFIG_AVDT_TRACE_LEVEL_WARNING=y
-# CONFIG_AVDT_TRACE_LEVEL_API is not set
-# CONFIG_AVDT_TRACE_LEVEL_EVENT is not set
-# CONFIG_AVDT_TRACE_LEVEL_DEBUG is not set
-# CONFIG_AVDT_TRACE_LEVEL_VERBOSE is not set
-CONFIG_AVDT_INITIAL_TRACE_LEVEL=2
-# CONFIG_AVCT_TRACE_LEVEL_NONE is not set
-# CONFIG_AVCT_TRACE_LEVEL_ERROR is not set
-CONFIG_AVCT_TRACE_LEVEL_WARNING=y
-# CONFIG_AVCT_TRACE_LEVEL_API is not set
-# CONFIG_AVCT_TRACE_LEVEL_EVENT is not set
-# CONFIG_AVCT_TRACE_LEVEL_DEBUG is not set
-# CONFIG_AVCT_TRACE_LEVEL_VERBOSE is not set
-CONFIG_AVCT_INITIAL_TRACE_LEVEL=2
-# CONFIG_AVRC_TRACE_LEVEL_NONE is not set
-# CONFIG_AVRC_TRACE_LEVEL_ERROR is not set
-CONFIG_AVRC_TRACE_LEVEL_WARNING=y
-# CONFIG_AVRC_TRACE_LEVEL_API is not set
-# CONFIG_AVRC_TRACE_LEVEL_EVENT is not set
-# CONFIG_AVRC_TRACE_LEVEL_DEBUG is not set
-# CONFIG_AVRC_TRACE_LEVEL_VERBOSE is not set
-CONFIG_AVRC_INITIAL_TRACE_LEVEL=2
-# CONFIG_MCA_TRACE_LEVEL_NONE is not set
-# CONFIG_MCA_TRACE_LEVEL_ERROR is not set
-CONFIG_MCA_TRACE_LEVEL_WARNING=y
-# CONFIG_MCA_TRACE_LEVEL_API is not set
-# CONFIG_MCA_TRACE_LEVEL_EVENT is not set
-# CONFIG_MCA_TRACE_LEVEL_DEBUG is not set
-# CONFIG_MCA_TRACE_LEVEL_VERBOSE is not set
-CONFIG_MCA_INITIAL_TRACE_LEVEL=2
-# CONFIG_HID_TRACE_LEVEL_NONE is not set
-# CONFIG_HID_TRACE_LEVEL_ERROR is not set
-CONFIG_HID_TRACE_LEVEL_WARNING=y
-# CONFIG_HID_TRACE_LEVEL_API is not set
-# CONFIG_HID_TRACE_LEVEL_EVENT is not set
-# CONFIG_HID_TRACE_LEVEL_DEBUG is not set
-# CONFIG_HID_TRACE_LEVEL_VERBOSE is not set
-CONFIG_HID_INITIAL_TRACE_LEVEL=2
-# CONFIG_APPL_TRACE_LEVEL_NONE is not set
-# CONFIG_APPL_TRACE_LEVEL_ERROR is not set
-CONFIG_APPL_TRACE_LEVEL_WARNING=y
-# CONFIG_APPL_TRACE_LEVEL_API is not set
-# CONFIG_APPL_TRACE_LEVEL_EVENT is not set
-# CONFIG_APPL_TRACE_LEVEL_DEBUG is not set
-# CONFIG_APPL_TRACE_LEVEL_VERBOSE is not set
-CONFIG_APPL_INITIAL_TRACE_LEVEL=2
-# CONFIG_GATT_TRACE_LEVEL_NONE is not set
-# CONFIG_GATT_TRACE_LEVEL_ERROR is not set
-CONFIG_GATT_TRACE_LEVEL_WARNING=y
-# CONFIG_GATT_TRACE_LEVEL_API is not set
-# CONFIG_GATT_TRACE_LEVEL_EVENT is not set
-# CONFIG_GATT_TRACE_LEVEL_DEBUG is not set
-# CONFIG_GATT_TRACE_LEVEL_VERBOSE is not set
-CONFIG_GATT_INITIAL_TRACE_LEVEL=2
-# CONFIG_SMP_TRACE_LEVEL_NONE is not set
-# CONFIG_SMP_TRACE_LEVEL_ERROR is not set
-CONFIG_SMP_TRACE_LEVEL_WARNING=y
-# CONFIG_SMP_TRACE_LEVEL_API is not set
-# CONFIG_SMP_TRACE_LEVEL_EVENT is not set
-# CONFIG_SMP_TRACE_LEVEL_DEBUG is not set
-# CONFIG_SMP_TRACE_LEVEL_VERBOSE is not set
-CONFIG_SMP_INITIAL_TRACE_LEVEL=2
-# CONFIG_BTIF_TRACE_LEVEL_NONE is not set
-# CONFIG_BTIF_TRACE_LEVEL_ERROR is not set
-CONFIG_BTIF_TRACE_LEVEL_WARNING=y
-# CONFIG_BTIF_TRACE_LEVEL_API is not set
-# CONFIG_BTIF_TRACE_LEVEL_EVENT is not set
-# CONFIG_BTIF_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BTIF_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BTIF_INITIAL_TRACE_LEVEL=2
-# CONFIG_BTC_TRACE_LEVEL_NONE is not set
-# CONFIG_BTC_TRACE_LEVEL_ERROR is not set
-CONFIG_BTC_TRACE_LEVEL_WARNING=y
-# CONFIG_BTC_TRACE_LEVEL_API is not set
-# CONFIG_BTC_TRACE_LEVEL_EVENT is not set
-# CONFIG_BTC_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BTC_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BTC_INITIAL_TRACE_LEVEL=2
-# CONFIG_OSI_TRACE_LEVEL_NONE is not set
-# CONFIG_OSI_TRACE_LEVEL_ERROR is not set
-CONFIG_OSI_TRACE_LEVEL_WARNING=y
-# CONFIG_OSI_TRACE_LEVEL_API is not set
-# CONFIG_OSI_TRACE_LEVEL_EVENT is not set
-# CONFIG_OSI_TRACE_LEVEL_DEBUG is not set
-# CONFIG_OSI_TRACE_LEVEL_VERBOSE is not set
-CONFIG_OSI_INITIAL_TRACE_LEVEL=2
-# CONFIG_BLUFI_TRACE_LEVEL_NONE is not set
-# CONFIG_BLUFI_TRACE_LEVEL_ERROR is not set
-CONFIG_BLUFI_TRACE_LEVEL_WARNING=y
-# CONFIG_BLUFI_TRACE_LEVEL_API is not set
-# CONFIG_BLUFI_TRACE_LEVEL_EVENT is not set
-# CONFIG_BLUFI_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BLUFI_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BLUFI_INITIAL_TRACE_LEVEL=2
-# CONFIG_BLE_ACTIVE_SCAN_REPORT_ADV_SCAN_RSP_INDIVIDUALLY is not set
-# CONFIG_BT_NIMBLE_COEX_PHY_CODED_TX_RX_TLIM_EN is not set
-CONFIG_BT_NIMBLE_COEX_PHY_CODED_TX_RX_TLIM_DIS=y
-CONFIG_SW_COEXIST_ENABLE=y
-CONFIG_ESP32_WIFI_SW_COEXIST_ENABLE=y
-CONFIG_ESP_WIFI_SW_COEXIST_ENABLE=y
-# CONFIG_MCPWM_ISR_IN_IRAM is not set
+# CONFIG_EXTERNAL_COEX_ENABLE is not set
+# CONFIG_ESP_WIFI_EXTERNAL_COEXIST_ENABLE is not set
 # CONFIG_EVENT_LOOP_PROFILING is not set
 CONFIG_POST_EVENTS_FROM_ISR=y
 CONFIG_POST_EVENTS_FROM_IRAM_ISR=y
 CONFIG_GDBSTUB_SUPPORT_TASKS=y
 CONFIG_GDBSTUB_MAX_TASKS=32
 # CONFIG_OTA_ALLOW_HTTP is not set
-CONFIG_ESP32S3_DEEP_SLEEP_WAKEUP_DELAY=2000
-CONFIG_ESP_SLEEP_DEEP_SLEEP_WAKEUP_DELAY=2000
-CONFIG_ESP32S3_RTC_CLK_SRC_INT_RC=y
-# CONFIG_ESP32S3_RTC_CLK_SRC_EXT_CRYS is not set
-# CONFIG_ESP32S3_RTC_CLK_SRC_EXT_OSC is not set
-# CONFIG_ESP32S3_RTC_CLK_SRC_INT_8MD256 is not set
-CONFIG_ESP32S3_RTC_CLK_CAL_CYCLES=1024
+# CONFIG_ESP_SYSTEM_PD_FLASH is not set
+CONFIG_ESP32C3_LIGHTSLEEP_GPIO_RESET_WORKAROUND=y
+CONFIG_ESP32C3_RTC_CLK_SRC_INT_RC=y
+# CONFIG_ESP32C3_RTC_CLK_SRC_EXT_CRYS is not set
+# CONFIG_ESP32C3_RTC_CLK_SRC_EXT_OSC is not set
+# CONFIG_ESP32C3_RTC_CLK_SRC_INT_8MD256 is not set
+CONFIG_ESP32C3_RTC_CLK_CAL_CYCLES=1024
 CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
 # CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set
 CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
@@ -3077,14 +2277,11 @@ CONFIG_ESP32_PHY_MAX_TX_POWER=20
 # CONFIG_REDUCE_PHY_TX_POWER is not set
 # CONFIG_ESP32_REDUCE_PHY_TX_POWER is not set
 CONFIG_ESP_SYSTEM_PM_POWER_DOWN_CPU=y
-CONFIG_PM_POWER_DOWN_TAGMEM_IN_LIGHT_SLEEP=y
-CONFIG_ESP32S3_SPIRAM_SUPPORT=y
-CONFIG_DEFAULT_PSRAM_CLK_IO=30
-CONFIG_DEFAULT_PSRAM_CS_IO=26
-# CONFIG_ESP32S3_DEFAULT_CPU_FREQ_80 is not set
-CONFIG_ESP32S3_DEFAULT_CPU_FREQ_160=y
-# CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240 is not set
-CONFIG_ESP32S3_DEFAULT_CPU_FREQ_MHZ=160
+# CONFIG_ESP32C3_DEFAULT_CPU_FREQ_80 is not set
+CONFIG_ESP32C3_DEFAULT_CPU_FREQ_160=y
+CONFIG_ESP32C3_DEFAULT_CPU_FREQ_MHZ=160
+CONFIG_ESP32C3_MEMPROT_FEATURE=y
+CONFIG_ESP32C3_MEMPROT_FEATURE_LOCK=y
 CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
 CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304
 CONFIG_MAIN_TASK_STACK_SIZE=3584
@@ -3097,51 +2294,44 @@ CONFIG_CONSOLE_UART_NUM=0
 CONFIG_CONSOLE_UART_BAUDRATE=115200
 CONFIG_INT_WDT=y
 CONFIG_INT_WDT_TIMEOUT_MS=300
-CONFIG_INT_WDT_CHECK_CPU1=y
 CONFIG_TASK_WDT=y
 CONFIG_ESP_TASK_WDT=y
 # CONFIG_TASK_WDT_PANIC is not set
 CONFIG_TASK_WDT_TIMEOUT_S=5
 CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
-CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
 # CONFIG_ESP32_DEBUG_STUBS_ENABLE is not set
-CONFIG_ESP32S3_DEBUG_OCDAWARE=y
+CONFIG_ESP32C3_DEBUG_OCDAWARE=y
 CONFIG_BROWNOUT_DET=y
-CONFIG_ESP32S3_BROWNOUT_DET=y
+CONFIG_ESP32C3_BROWNOUT_DET=y
 CONFIG_BROWNOUT_DET_LVL_SEL_7=y
-CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_7=y
+CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_7=y
 # CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set
-# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_6 is not set
+# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_6 is not set
 # CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set
-# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_5 is not set
+# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_5 is not set
 # CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set
-# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_4 is not set
+# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_4 is not set
 # CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set
-# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_3 is not set
+# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_3 is not set
 # CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set
-# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_2 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set
-# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_1 is not set
+# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_2 is not set
 CONFIG_BROWNOUT_DET_LVL=7
-CONFIG_ESP32S3_BROWNOUT_DET_LVL=7
-CONFIG_IPC_TASK_STACK_SIZE=1280
+CONFIG_ESP32C3_BROWNOUT_DET_LVL=7
+CONFIG_IPC_TASK_STACK_SIZE=1024
 CONFIG_TIMER_TASK_STACK_SIZE=3584
 CONFIG_ESP32_WIFI_ENABLED=y
 CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10
 CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
-CONFIG_ESP32_WIFI_STATIC_TX_BUFFER=y
-CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=0
-CONFIG_ESP32_WIFI_STATIC_TX_BUFFER_NUM=16
-CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=32
+# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set
+CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y
+CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1
+CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32
 # CONFIG_ESP32_WIFI_CSI_ENABLED is not set
 CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
 CONFIG_ESP32_WIFI_TX_BA_WIN=6
 CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
 CONFIG_ESP32_WIFI_RX_BA_WIN=6
-# CONFIG_ESP32_WIFI_AMSDU_TX_ENABLED is not set
 CONFIG_ESP32_WIFI_NVS_ENABLED=y
-CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
-# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set
 CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752
 CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
 CONFIG_ESP32_WIFI_IRAM_OPT=y
@@ -3167,7 +2357,6 @@ CONFIG_TIMER_TASK_PRIORITY=1
 CONFIG_TIMER_TASK_STACK_DEPTH=2048
 CONFIG_TIMER_QUEUE_LENGTH=10
 # CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set
-CONFIG_SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY=y
 # CONFIG_HAL_ASSERTION_SILIENT is not set
 # CONFIG_L2_TO_L3_COPY is not set
 CONFIG_ESP_GRATUITOUS_ARP=y
@@ -3188,21 +2377,15 @@ CONFIG_UDP_RECVMBOX_SIZE=6
 CONFIG_TCPIP_TASK_STACK_SIZE=3072
 CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
 # CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set
-# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set
 CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF
 # CONFIG_PPP_SUPPORT is not set
-CONFIG_ESP32S3_TIME_SYSCALL_USE_RTC_SYSTIMER=y
-CONFIG_ESP32S3_TIME_SYSCALL_USE_RTC_FRC1=y
-# CONFIG_ESP32S3_TIME_SYSCALL_USE_RTC is not set
-# CONFIG_ESP32S3_TIME_SYSCALL_USE_SYSTIMER is not set
-# CONFIG_ESP32S3_TIME_SYSCALL_USE_FRC1 is not set
-# CONFIG_ESP32S3_TIME_SYSCALL_USE_NONE is not set
+CONFIG_ESP32C3_TIME_SYSCALL_USE_RTC_SYSTIMER=y
+# CONFIG_ESP32C3_TIME_SYSCALL_USE_RTC is not set
+# CONFIG_ESP32C3_TIME_SYSCALL_USE_SYSTIMER is not set
+# CONFIG_ESP32C3_TIME_SYSCALL_USE_NONE is not set
 CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
 CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
 CONFIG_ESP32_PTHREAD_STACK_MIN=768
-CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y
-# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set
-# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set
 CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1
 CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread"
 CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
diff --git a/性能分析报告.md b/性能分析报告.md
new file mode 100644
index 0000000..d2f2657
--- /dev/null
+++ b/性能分析报告.md
@@ -0,0 +1,89 @@
+I (24) boot: ESP-IDF v5.4.2-dirty 2nd stage bootloader
+I (24) boot: compile time Feb 12 2026 14:18:02
+I (25) boot: chip revision: v0.4
+I (25) boot: efuse block revision: v1.3
+I (29) boot.esp32c3: SPI Speed      : 80MHz
+I (32) boot.esp32c3: SPI Mode       : DIO
+I (36) boot.esp32c3: SPI Flash Size : 8MB
+I (40) boot: Enabling RNG early entropy source...
+I (44) boot: Partition Table:
+I (47) boot: ## Label            Usage          Type ST Offset   Length
+I (53) boot:  0 nvs              WiFi data        01 02 00009000 00006000
+I (60) boot:  1 phy_init         RF data          01 01 0000f000 00001000
+I (66) boot:  2 factory          factory app      00 00 00010000 00400000
+I (73) boot:  3 storage          Unknown data     01 82 00410000 00200000
+I (79) boot: End of partition table
+I (83) esp_image: segment 0: paddr=00010020 vaddr=3c070020 size=7c8e4h (510180) map
+I (171) esp_image: segment 1: paddr=0008c90c vaddr=3fc91000 size=01c10h (  7184) load
+I (173) esp_image: segment 2: paddr=0008e524 vaddr=40380000 size=01af4h (  6900) load
+I (177) esp_image: segment 3: paddr=00090020 vaddr=42000020 size=6a170h (434544) map
+I (252) esp_image: segment 4: paddr=000fa198 vaddr=40381af4 size=0f300h ( 62208) load
+I (264) esp_image: segment 5: paddr=001094a0 vaddr=50000000 size=0001ch (    28) load
+I (269) boot: Loaded app from partition at offset 0x10000
+I (269) boot: Disabling RNG early entropy source...
+I (281) cpu_start: Unicore app
+I (290) cpu_start: Pro cpu start user code
+I (290) cpu_start: cpu freq: 160000000 Hz
+I (290) app_init: Application information:
+I (290) app_init: Project name:     program
+I (294) app_init: App version:      455c92d-dirty
+I (298) app_init: Compile time:     Feb 12 2026 14:17:45
+I (303) app_init: ELF file SHA256:  ab5b876f8...
+I (308) app_init: ESP-IDF:          v5.4.2-dirty
+I (312) efuse_init: Min chip rev:     v0.3
+I (316) efuse_init: Max chip rev:     v1.99 
+I (320) efuse_init: Chip rev:         v0.4
+I (324) heap_init: Initializing. RAM available for dynamic allocation:
+I (330) heap_init: At 3FCA0510 len 0001FAF0 (126 KiB): RAM
+I (335) heap_init: At 3FCC0000 len 0001C710 (113 KiB): Retention RAM
+I (341) heap_init: At 3FCDC710 len 00002950 (10 KiB): Retention RAM
+I (347) heap_init: At 5000001C len 00001FCC (7 KiB): RTCRAM
+I (353) spi_flash: detected chip: mxic
+I (356) spi_flash: flash io: dio
+W (359) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
+I (369) sleep_gpio: Configure to isolate all GPIO pins in sleep state
+I (375) sleep_gpio: Enable automatic switching of GPIO sleep configuration
+I (393) coexist: coex firmware version: 7b9a184
+I (393) coexist: coexist rom version 9387209
+I (394) main_task: Started on CPU0
+I (394) main_task: Calling app_main()
+I (394) MAIN: 1. I2C已初始化
+I (404) MAIN: 2. NVS已初始化
+I (404) st77916: version: 2.0.2
+I (404) st77916_spi: LCD panel create success, version: 2.0.2
+W (524) st77916_spi: The 3Ah command has been used and will be overwritten by external initialization sequence
+I (684) LCD: LCD GRAM cleared (black filled)
+I (694) MAIN: 3. LCD已初始化
+I (694) gpio: GPIO[10]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:2 
+I (694) CST816S: IC id: 182
+I (694) LCD: Touch controller initialized successfully
+I (704) MAIN: 4. 触摸控制器已初始化
+I (704) LVGL: Starting LVGL task
+I (704) LCD: LVGL buffer size: 21600 bytes (W: 360, Lines: 30)
+I (714) LCD: Touch controller added to LVGL
+I (714) MAIN: 5. LVGL已初始化
+I (774) FATFS: SPIFFS: Total size: 1920401, Used: 68774
+I (774) MAIN: 6. FATFS文件系统已初始化
+I (834) FATFS: 文件名: /spiflash/02.jpg,大小:20498
+I (834) FATFS: 文件名: /spiflash/default.jpg,大小:47430
+I (874) MAIN: 7. SPIFFS处理完成
+I (894) MAIN: 8. SquareLine UI已初始化
+I (1144) MAIN: 8.1 LCD显示已打开
+I (1144) MAIN: 9. PWM背光已初始化
+I (1144) gpio: GPIO[2]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
+I (1144) BAT: ADC校准初始化成功
+I (1144) BAT: 电池ADC初始化完成 (GPIO2, ADC1_CH2, 分压比=2)
+I (1154) MAIN: 10. 电池ADC已初始化
+I (1154) BAT: ADC原始值=3267, ADC电压=2393mV, 电池电压=4786mV, 电量=100%
+I (1164) BAT: 电池监控任务已启动，更新间隔5000ms
+I (1174) MAIN: 11. 电池监控任务已启动
+I (1174) gpio: GPIO[8]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:2 
+I (1184) gpio: GPIO[9]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:2 
+I (1194) BTN: 按键初始化完成 (BOOT=GPIO9, KEY2=GPIO8)
+I (1194) MAIN: 12. 按键已初始化
+I (1204) MAIN: 12.1 BOOT按键回调已注册
+I (1254) SLEEP: 休眠管理器初始化完成（超时=10s）
+I (1254) MAIN: 13. 休眠管理器已初始化
+I (1264) MAIN: 系统初始化完成成功！
+I (1264) main_task: Returned from app_main()
+I (6164) BAT: ADC原始值=3276, ADC电压=2400mV, 电池电压=4800mV, 电量=100%
\ No newline at end of file
diff --git a/设备运行日志.md b/设备运行日志.md
index c93897e..d2f2657 100644
--- a/设备运行日志.md
+++ b/设备运行日志.md
@@ -1,282 +1,89 @@
-rdzleo@RdzleodeMac-Studio dzbj % '/Users/rdzleo/.espressif/python_env/idf5.4_py3.13_env/bin/python3' '/Users/rd
-zleo/esp/esp-idf/v5.4.2/esp-idf/tools/idf_monitor.py' -p /dev/tty.usbmodem834401 -b 115200 --toolchain-prefix x
-tensa-esp32s3-elf- --make ''/Users/rdzleo/.espressif/python_env/idf5.4_py3.13_env/bin/python3' '/Users/rdzleo/e
-sp/esp-idf/v5.4.2/esp-idf/tools/idf.py'' --target esp32s3 '/Users/rdzleo/Desktop/dzbj/build/program.elf'
---- Warning: Serial ports accessed as /dev/tty.* will hang gdb if launched.
---- Using /dev/cu.usbmodem834401 instead...
---- esp-idf-monitor 1.8.0 on /dev/cu.usbmodem834401 115200
---- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H
- This driver is aESP-ROM:esp32s3-20210327
-Build:Mar 27 2021
-rst:0x15 (USB_UART_CHIP_RESET),boot:0x2b (SPI_FAST_FLASH_BOOT)
-Saved PC:0x40048836
---- 0x40048836: uart_tx_one_char_uart in ROM
-SPIWP:0xee
-mode:DIO, clock div:1
-load:0x3fce2820,len:0x16d0
-load:0x403c8700,len:0x4
-load:0x403c8704,len:0xec8
-load:0x403cb700,len:0x3160
-entry 0x403c8950
-I (26) boot: ESP-IDF v5.4.2-dirty 2nd stage bootloader
-I (27) boot: compile time Feb  9 2026 10:08:02
-I (27) boot: Multicore bootloader
-I (27) boot: chip revision: v0.2
-I (30) boot: efuse block revision: v1.3
-I (34) qio_mode: Enabling default flash chip QIO
-I (38) boot.esp32s3: Boot SPI Speed : 80MHz
-I (42) boot.esp32s3: SPI Mode       : QIO
-I (46) boot.esp32s3: SPI Flash Size : 16MB
-I (50) boot: Enabling RNG early entropy source...
-I (54) boot: Partition Table:
-I (57) boot: ## Label            Usage          Type ST Offset   Length
-I (63) boot:  0 nvs              WiFi data        01 02 00009000 00006000
-I (70) boot:  1 phy_init         RF data          01 01 0000f000 00001000
-I (76) boot:  2 factory          factory app      00 00 00010000 00400000
-I (83) boot:  3 storage          Unknown data     01 82 00410000 00200000
-I (89) boot: End of partition table
-I (92) esp_image: segment 0: paddr=00010020 vaddr=3c060020 size=78508h (492808) map
-I (173) esp_image: segment 1: paddr=00088530 vaddr=3fc98600 size=03688h ( 13960) load
-I (176) esp_image: segment 2: paddr=0008bbc0 vaddr=40374000 size=04458h ( 17496) load
-I (180) esp_image: segment 3: paddr=00090020 vaddr=42000020 size=5c8ech (379116) map
-I (241) esp_image: segment 4: paddr=000ec914 vaddr=40378458 size=1015ch ( 65884) load
-I (253) esp_image: segment 5: paddr=000fca78 vaddr=600fe000 size=0001ch (    28) load
-I (262) boot: Loaded app from partition at offset 0x10000
-I (262) boot: Disabling RNG early entropy source...
-I (272) octal_psram: ECC is enabled
-I (272) octal_psram: vendor id    : 0x0d (AP)
-I (272) octal_psram: dev id       : 0x02 (generation 3)
-I (273) octal_psram: density      : 0x03 (64 Mbit)
-I (277) octal_psram: good-die     : 0x01 (Pass)
-I (282) octal_psram: Latency      : 0x01 (Fixed)
-I (286) octal_psram: VCC          : 0x01 (3V)
-I (290) octal_psram: SRF          : 0x01 (Fast Refresh)
-I (295) octal_psram: BurstType    : 0x00 ( Wrap)
-I (299) octal_psram: BurstLen     : 0x03 (1024 Byte)
-I (304) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
-I (309) octal_psram: DriveStrength: 0x00 (1/1)
-I (314) MSPI Timing: PSRAM timing tuning index: 5
-I (318) esp_psram: Found 8MB PSRAM device
-I (322) esp_psram: Speed: 80MHz
-I (364) mmu_psram: Read only data copied and mapped to SPIRAM
-I (395) mmu_psram: Instructions copied and mapped to SPIRAM
-I (396) cpu_start: Multicore app
-I (795) esp_psram: SPI SRAM memory test OK
-I (803) cpu_start: Pro cpu start user code
-I (803) cpu_start: cpu freq: 160000000 Hz
-I (803) app_init: Application information:
-I (804) app_init: Project name:     program
-I (807) app_init: App version:      1
-I (811) app_init: Compile time:     Feb  9 2026 10:07:49
-I (816) app_init: ELF file SHA256:  fe13bd2c7...
-I (820) app_init: ESP-IDF:          v5.4.2-dirty
-I (824) efuse_init: Min chip rev:     v0.0
-I (828) efuse_init: Max chip rev:     v0.99 
-I (832) efuse_init: Chip rev:         v0.2
-I (836) heap_init: Initializing. RAM available for dynamic allocation:
-I (842) heap_init: At 3FCACCB0 len 0003CA60 (242 KiB): RAM
-I (847) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
-I (853) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM
-I (858) heap_init: At 600FE01C len 00001FCC (7 KiB): RTCRAM
-I (863) esp_psram: Adding pool of 6784K of PSRAM memory to heap allocator
-I (870) esp_psram: Adding pool of 30K of PSRAM memory gap generated due to end address alignment of drom to the heap allocator
-I (881) spi_flash: detected chip: generic
-I (884) spi_flash: flash io: qio
-W (888) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
-I (897) sleep_gpio: Configure to isolate all GPIO pins in sleep state
-I (904) sleep_gpio: Enable automatic switching of GPIO sleep configuration
-I (910) coexist: coex firmware version: 7b9a184
-I (914) coexist: coexist rom version e7ae62f
-I (919) main_task: Started on CPU0
-I (929) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
-I (929) main_task: Calling app_main()
-I (929) MAIN: Starting system initialization...
-I (939) MAIN: 1. Initializing I2C...
-I (939) MAIN: I2C initialized successfully
-I (949) MAIN: 2. Initializing NVS...
-I (949) MAIN: NVS initialized successfully
-I (949) MAIN: 3. Initializing LCD...
-I (959) gpio: GPIO[7]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
-I (959) st77916: LCD panel create success, version: 1.0.1
-W (1109) st77916: The 3Ah command has been used and will be overwritten by external initialization sequence
-I (1229) MAIN: LCD initialized successfully
-I (1229) MAIN: 4. Initializing touch controller...
-I (1229) gpio: GPIO[4]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:2 
-I (1229) gpio: GPIO[6]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
-I (1639) CST816S: IC id: 182
-I (1639) LCD: Touch controller initialized successfully
-I (1639) MAIN: Touch controller initialized
-I (1639) MAIN: 5. Initializing LVGL...
-I (1639) LVGL: Starting LVGL task
-I (1639) LCD: LVGL buffer size: 21600 bytes (W: 360, Lines: 30)
-I (1649) LCD: Touch controller added to LVGL
-I (1649) MAIN: LVGL initialized successfully
-I (1759) MAIN: LVGL task started
-I (1759) MAIN: 6. Initializing FATFS...
-I (1809) FATFS: SPIFFS: Total size: 1920401, Used: 78061
-I (1809) MAIN: FATFS initialized successfully
-I (1809) MAIN: 7. Initializing PWM backlight...
-I (1809) MAIN: PWM backlight initialized successfully
-I (1809) MAIN: 8. Processing SPIFFS...
-I (1879) FATFS: 文件名: /spiflash/03.jpg,大小:8805
-I (1879) FATFS: 文件名: /spiflash/02.jpg,大小:20498
-I (1879) FATFS: 文件名: /spiflash/default.jpg,大小:47430
-I (1909) MAIN: 9. Initializing SquareLine UI...
-I (1969) MAIN: SquareLine UI initialized
-I (1969) MAIN: 10. Waiting for UI rendering...
-I (2039) MAIN: Rendering step 1 completed
-I (2089) MAIN: Rendering step 2 completed
-I (2139) MAIN: Rendering step 3 completed
-I (2139) MAIN: UI rendering completed
-I (2139) MAIN: System initialization finished successfully!
-I (2139) main_task: Returned from app_main()
-I (6789) LVGL: Touch detected: x=175, y=36, count=1
-I (6819) LVGL: Touch detected: x=178, y=41, count=1
-I (6849) LVGL: Touch detected: x=183, y=50, count=1
-I (6879) LVGL: Touch detected: x=190, y=65, count=1
-I (6929) LVGL: Touch detected: x=208, y=122, count=1
-I (6959) LVGL: Touch detected: x=218, y=161, count=1
-I (6989) LVGL: Touch detected: x=232, y=201, count=1
-I (7019) LVGL: Touch detected: x=251, y=243, count=1
-I (7049) LVGL: Touch detected: x=263, y=265, count=1
-I (7829) LVGL: Touch detected: x=191, y=328, count=1
-I (7859) LVGL: Touch detected: x=192, y=326, count=1
-I (7889) LVGL: Touch detected: x=195, y=313, count=1
-I (7919) LVGL: Touch detected: x=199, y=287, count=1
-I (9389) LVGL: Touch detected: x=200, y=34, count=1
-I (9419) LVGL: Touch detected: x=200, y=34, count=1
-I (9449) LVGL: Touch detected: x=200, y=34, count=1
-I (9479) LVGL: Touch detected: x=201, y=36, count=1
-I (9509) LVGL: Touch detected: x=205, y=49, count=1
-I (9539) LVGL: Touch detected: x=209, y=66, count=1
-I (9579) LVGL: Touch detected: x=217, y=100, count=1
-I (9609) LVGL: Touch detected: x=221, y=121, count=1
-I (9639) LVGL: Touch detected: x=227, y=141, count=1
-I (9669) LVGL: Touch detected: x=235, y=161, count=1
-I (9699) LVGL: Touch detected: x=243, y=178, count=1
-I (10509) LVGL: Touch detected: x=195, y=326, count=1
-I (10539) LVGL: Touch detected: x=195, y=325, count=1
-I (10569) LVGL: Touch detected: x=198, y=313, count=1
-I (10599) LVGL: Touch detected: x=201, y=290, count=1
-I (11409) LVGL: Touch detected: x=10, y=157, count=1
-I (11439) LVGL: Touch detected: x=10, y=157, count=1
-I (11469) LVGL: Touch detected: x=11, y=157, count=1
-I (11499) LVGL: Touch detected: x=23, y=157, count=1
-I (11529) LVGL: Touch detected: x=45, y=157, count=1
-I (11559) LVGL: Touch detected: x=87, y=157, count=1
-I (11589) LVGL: Touch detected: x=142, y=157, count=1
-I (11619) LVGL: Touch detected: x=221, y=157, count=1
-I (11649) LVGL: Touch detected: x=258, y=157, count=1
-I (12189) LVGL: Touch detected: x=352, y=159, count=1
-I (12219) LVGL: Touch detected: x=352, y=159, count=1
-I (12249) LVGL: Touch detected: x=351, y=159, count=1
-I (12279) LVGL: Touch detected: x=332, y=156, count=1
-I (12309) LVGL: Touch detected: x=305, y=152, count=1
-I (12339) LVGL: Touch detected: x=273, y=146, count=1
-I (12369) LVGL: Touch detected: x=245, y=141, count=1
-I (12399) LVGL: Touch detected: x=217, y=137, count=1
-I (12429) LVGL: Touch detected: x=187, y=132, count=1
-I (12969) LVGL: Touch detected: x=165, y=36, count=1
-I (12999) LVGL: Touch detected: x=165, y=36, count=1
-I (13029) LVGL: Touch detected: x=166, y=40, count=1
-I (13059) LVGL: Touch detected: x=171, y=56, count=1
-I (13089) LVGL: Touch detected: x=180, y=86, count=1
-I (13139) LVGL: Touch detected: x=195, y=137, count=1
-I (13169) LVGL: Touch detected: x=205, y=168, count=1
-I (13199) LVGL: Touch detected: x=215, y=193, count=1
-I (13709) LVGL: Touch detected: x=181, y=321, count=1
-I (13739) LVGL: Touch detected: x=179, y=312, count=1
-I (13769) LVGL: Touch detected: x=178, y=291, count=1
-I (14309) LVGL: Touch detected: x=211, y=25, count=1
-I (14339) LVGL: Touch detected: x=211, y=25, count=1
-I (14369) LVGL: Touch detected: x=211, y=28, count=1
-I (14399) LVGL: Touch detected: x=214, y=39, count=1
-I (14429) LVGL: Touch detected: x=221, y=62, count=1
-I (14469) LVGL: Touch detected: x=241, y=112, count=1
-I (14499) LVGL: Touch detected: x=252, y=139, count=1
-I (14529) LVGL: Touch detected: x=262, y=161, count=1
-I (14559) LVGL: Touch detected: x=277, y=189, count=1
-I (14589) LVGL: Touch detected: x=287, y=203, count=1
-I (15279) LVGL: Touch detected: x=173, y=324, count=1
-I (15309) LVGL: Touch detected: x=173, y=320, count=1
-I (15339) LVGL: Touch detected: x=175, y=309, count=1
-I (15369) LVGL: Touch detected: x=178, y=286, count=1
-I (15879) LVGL: Touch detected: x=216, y=56, count=1
-I (15909) LVGL: Touch detected: x=216, y=56, count=1
-I (15939) LVGL: Touch detected: x=216, y=56, count=1
-I (15969) LVGL: Touch detected: x=216, y=57, count=1
-I (15999) LVGL: Touch detected: x=219, y=64, count=1
-I (16029) LVGL: Touch detected: x=227, y=86, count=1
-I (16079) LVGL: Touch detected: x=243, y=129, count=1
-I (16109) LVGL: Touch detected: x=253, y=156, count=1
-I (16139) LVGL: Touch detected: x=262, y=177, count=1
-I (16709) LVGL: Touch detected: x=11, y=134, count=1
-I (16739) LVGL: Touch detected: x=24, y=136, count=1
-I (16769) LVGL: Touch detected: x=52, y=139, count=1
-I (16799) LVGL: Touch detected: x=124, y=146, count=1
-I (16829) LVGL: Touch detected: x=172, y=151, count=1
-I (16859) LVGL: Touch detected: x=217, y=154, count=1
-I (16889) LVGL: Touch detected: x=261, y=154, count=1
-I (16919) LVGL: Touch detected: x=308, y=153, count=1
-I (17699) LVGL: Touch detected: x=203, y=27, count=1
-I (17729) LVGL: Touch detected: x=203, y=28, count=1
-I (17759) LVGL: Touch detected: x=205, y=36, count=1
-I (17789) LVGL: Touch detected: x=207, y=52, count=1
-I (17819) LVGL: Touch detected: x=213, y=79, count=1
-I (17849) LVGL: Touch detected: x=227, y=116, count=1
-I (17879) LVGL: Touch detected: x=241, y=151, count=1
-I (18419) LVGL: Touch detected: x=97, y=130, count=1
-I (18449) LVGL: Touch detected: x=97, y=130, count=1
-I (20399) LVGL: Touch detected: x=196, y=32, count=1
-I (20429) LVGL: Touch detected: x=197, y=35, count=1
-I (20459) LVGL: Touch detected: x=199, y=42, count=1
-I (20489) LVGL: Touch detected: x=201, y=55, count=1
-I (20519) LVGL: Touch detected: x=205, y=77, count=1
-I (20549) LVGL: Touch detected: x=211, y=104, count=1
-I (20579) LVGL: Touch detected: x=233, y=158, count=1
-I (20999) LVGL: Touch detected: x=180, y=337, count=1
-I (21029) LVGL: Touch detected: x=180, y=333, count=1
-I (21059) LVGL: Touch detected: x=179, y=315, count=1
-I (25709) LVGL: Touch detected: x=208, y=35, count=1
-I (25739) LVGL: Touch detected: x=208, y=35, count=1
-I (25769) LVGL: Touch detected: x=208, y=38, count=1
-I (25799) LVGL: Touch detected: x=208, y=48, count=1
-I (25829) LVGL: Touch detected: x=208, y=66, count=1
-I (25869) LVGL: Touch detected: x=212, y=132, count=1
-I (25899) LVGL: Touch detected: x=213, y=150, count=1
-I (25929) LVGL: Touch detected: x=216, y=195, count=1
-I (25959) LVGL: Touch detected: x=218, y=214, count=1
-I (25989) LVGL: Touch detected: x=223, y=227, count=1
-I (26529) LVGL: Touch detected: x=15, y=118, count=1
-I (26559) LVGL: Touch detected: x=15, y=118, count=1
-I (26589) LVGL: Touch detected: x=22, y=119, count=1
-I (26619) LVGL: Touch detected: x=44, y=123, count=1
-I (26649) LVGL: Touch detected: x=85, y=130, count=1
-I (26679) LVGL: Touch detected: x=157, y=141, count=1
-I (26709) LVGL: Touch detected: x=198, y=148, count=1
-I (26739) LVGL: Touch detected: x=233, y=152, count=1
-I (27189) LVGL: Touch detected: x=352, y=168, count=1
-I (27219) LVGL: Touch detected: x=352, y=168, count=1
-I (27249) LVGL: Touch detected: x=348, y=168, count=1
-I (27279) LVGL: Touch detected: x=324, y=167, count=1
-I (27309) LVGL: Touch detected: x=294, y=164, count=1
-I (27339) LVGL: Touch detected: x=252, y=161, count=1
-I (27369) LVGL: Touch detected: x=208, y=157, count=1
-I (27399) LVGL: Touch detected: x=180, y=153, count=1
-I (27429) LVGL: Touch detected: x=161, y=148, count=1
-I (27909) LVGL: Touch detected: x=166, y=336, count=1
-I (27939) LVGL: Touch detected: x=166, y=328, count=1
-I (28479) LVGL: Touch detected: x=199, y=325, count=1
-I (28509) LVGL: Touch detected: x=199, y=325, count=1
-I (28539) LVGL: Touch detected: x=198, y=322, count=1
-I (28569) LVGL: Touch detected: x=196, y=312, count=1
-I (28599) LVGL: Touch detected: x=195, y=292, count=1
-I (28629) LVGL: Touch detected: x=196, y=254, count=1
-I (28659) LVGL: Touch detected: x=201, y=162, count=1
-I (29139) LVGL: Touch detected: x=209, y=15, count=1
-I (29169) LVGL: Touch detected: x=209, y=16, count=1
-I (29199) LVGL: Touch detected: x=209, y=28, count=1
-I (29229) LVGL: Touch detected: x=212, y=55, count=1
-I (29279) LVGL: Touch detected: x=225, y=123, count=1
-I (29309) LVGL: Touch detected: x=235, y=166, count=1
-I (29339) LVGL: Touch detected: x=243, y=199, count=1
\ No newline at end of file
+I (24) boot: ESP-IDF v5.4.2-dirty 2nd stage bootloader
+I (24) boot: compile time Feb 12 2026 14:18:02
+I (25) boot: chip revision: v0.4
+I (25) boot: efuse block revision: v1.3
+I (29) boot.esp32c3: SPI Speed      : 80MHz
+I (32) boot.esp32c3: SPI Mode       : DIO
+I (36) boot.esp32c3: SPI Flash Size : 8MB
+I (40) boot: Enabling RNG early entropy source...
+I (44) boot: Partition Table:
+I (47) boot: ## Label            Usage          Type ST Offset   Length
+I (53) boot:  0 nvs              WiFi data        01 02 00009000 00006000
+I (60) boot:  1 phy_init         RF data          01 01 0000f000 00001000
+I (66) boot:  2 factory          factory app      00 00 00010000 00400000
+I (73) boot:  3 storage          Unknown data     01 82 00410000 00200000
+I (79) boot: End of partition table
+I (83) esp_image: segment 0: paddr=00010020 vaddr=3c070020 size=7c8e4h (510180) map
+I (171) esp_image: segment 1: paddr=0008c90c vaddr=3fc91000 size=01c10h (  7184) load
+I (173) esp_image: segment 2: paddr=0008e524 vaddr=40380000 size=01af4h (  6900) load
+I (177) esp_image: segment 3: paddr=00090020 vaddr=42000020 size=6a170h (434544) map
+I (252) esp_image: segment 4: paddr=000fa198 vaddr=40381af4 size=0f300h ( 62208) load
+I (264) esp_image: segment 5: paddr=001094a0 vaddr=50000000 size=0001ch (    28) load
+I (269) boot: Loaded app from partition at offset 0x10000
+I (269) boot: Disabling RNG early entropy source...
+I (281) cpu_start: Unicore app
+I (290) cpu_start: Pro cpu start user code
+I (290) cpu_start: cpu freq: 160000000 Hz
+I (290) app_init: Application information:
+I (290) app_init: Project name:     program
+I (294) app_init: App version:      455c92d-dirty
+I (298) app_init: Compile time:     Feb 12 2026 14:17:45
+I (303) app_init: ELF file SHA256:  ab5b876f8...
+I (308) app_init: ESP-IDF:          v5.4.2-dirty
+I (312) efuse_init: Min chip rev:     v0.3
+I (316) efuse_init: Max chip rev:     v1.99 
+I (320) efuse_init: Chip rev:         v0.4
+I (324) heap_init: Initializing. RAM available for dynamic allocation:
+I (330) heap_init: At 3FCA0510 len 0001FAF0 (126 KiB): RAM
+I (335) heap_init: At 3FCC0000 len 0001C710 (113 KiB): Retention RAM
+I (341) heap_init: At 3FCDC710 len 00002950 (10 KiB): Retention RAM
+I (347) heap_init: At 5000001C len 00001FCC (7 KiB): RTCRAM
+I (353) spi_flash: detected chip: mxic
+I (356) spi_flash: flash io: dio
+W (359) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
+I (369) sleep_gpio: Configure to isolate all GPIO pins in sleep state
+I (375) sleep_gpio: Enable automatic switching of GPIO sleep configuration
+I (393) coexist: coex firmware version: 7b9a184
+I (393) coexist: coexist rom version 9387209
+I (394) main_task: Started on CPU0
+I (394) main_task: Calling app_main()
+I (394) MAIN: 1. I2C已初始化
+I (404) MAIN: 2. NVS已初始化
+I (404) st77916: version: 2.0.2
+I (404) st77916_spi: LCD panel create success, version: 2.0.2
+W (524) st77916_spi: The 3Ah command has been used and will be overwritten by external initialization sequence
+I (684) LCD: LCD GRAM cleared (black filled)
+I (694) MAIN: 3. LCD已初始化
+I (694) gpio: GPIO[10]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:2 
+I (694) CST816S: IC id: 182
+I (694) LCD: Touch controller initialized successfully
+I (704) MAIN: 4. 触摸控制器已初始化
+I (704) LVGL: Starting LVGL task
+I (704) LCD: LVGL buffer size: 21600 bytes (W: 360, Lines: 30)
+I (714) LCD: Touch controller added to LVGL
+I (714) MAIN: 5. LVGL已初始化
+I (774) FATFS: SPIFFS: Total size: 1920401, Used: 68774
+I (774) MAIN: 6. FATFS文件系统已初始化
+I (834) FATFS: 文件名: /spiflash/02.jpg,大小:20498
+I (834) FATFS: 文件名: /spiflash/default.jpg,大小:47430
+I (874) MAIN: 7. SPIFFS处理完成
+I (894) MAIN: 8. SquareLine UI已初始化
+I (1144) MAIN: 8.1 LCD显示已打开
+I (1144) MAIN: 9. PWM背光已初始化
+I (1144) gpio: GPIO[2]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
+I (1144) BAT: ADC校准初始化成功
+I (1144) BAT: 电池ADC初始化完成 (GPIO2, ADC1_CH2, 分压比=2)
+I (1154) MAIN: 10. 电池ADC已初始化
+I (1154) BAT: ADC原始值=3267, ADC电压=2393mV, 电池电压=4786mV, 电量=100%
+I (1164) BAT: 电池监控任务已启动，更新间隔5000ms
+I (1174) MAIN: 11. 电池监控任务已启动
+I (1174) gpio: GPIO[8]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:2 
+I (1184) gpio: GPIO[9]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:2 
+I (1194) BTN: 按键初始化完成 (BOOT=GPIO9, KEY2=GPIO8)
+I (1194) MAIN: 12. 按键已初始化
+I (1204) MAIN: 12.1 BOOT按键回调已注册
+I (1254) SLEEP: 休眠管理器初始化完成（超时=10s）
+I (1254) MAIN: 13. 休眠管理器已初始化
+I (1264) MAIN: 系统初始化完成成功！
+I (1264) main_task: Returned from app_main()
+I (6164) BAT: ADC原始值=3276, ADC电压=2400mV, 电池电压=4800mV, 电量=100%
\ No newline at end of file
diff --git a/项目对比分析报告.md b/项目对比分析报告.md
index 78ed7d0..ed9892e 100644
--- a/项目对比分析报告.md
+++ b/项目对比分析报告.md
@@ -1,289 +1,80 @@
-# 项目对比分析报告
-
-## 1. 项目概述
-
-本次分析对比了两个基于 ESP32 平台的 LCD 驱动项目，重点分析 d zbj 项目在适配 LVGL 时遇到的问题：
-
-| 项目名称 | 路径 | 主要功能 |
-|---------|------|----------|
-| d zbj 项目 | `/Users/rdzleo/Desktop/dzbj` | 完整的嵌入式应用，包含 LCD 显示、触摸等功能 |
-| QSPI LCD 驱动版本 | `/Users/rdzleo/Desktop/qspi_lcd_驱动版本` | 专注于 LCD 驱动和触摸功能的实现，LVGL 适配成功 |
-
-## 2. 项目结构对比
-
-### 2.1 d zbj 项目结构
-
-```
-dzbj/
-├── main/
-│   ├── axis/        # 轴控制相关代码
-│   ├── ble/         # BLE 蓝牙功能
-│   ├── fatfs/       # 文件系统功能
-│   ├── gpio/        # GPIO 控制
-│   ├── lcd/         # LCD 驱动实现
-│   ├── pages/       # 页面管理
-│   ├── temp/        # 温度检测
-│   ├── ui/          # UI 界面（SquareLine Studio 生成）
-│   ├── wifi/        # WiFi 功能
-│   └── main.c       # 主函数
-├── build/           # 构建输出
-└── CMakeLists.txt   # 构建配置
-```
-
-### 2.2 QSPI LCD 驱动版本结构
-
-```
-qspi_lcd_驱动版本/
-├── main/
-│   ├── display_touch_manager.h  # 显示和触摸管理接口
-│   ├── lcd_touch_driver.h       # LCD 触摸驱动接口
-│   └── main.c                   # 主函数
-├── components/
-│   └── lvgl/                    # LVGL 组件
-└── CMakeLists.txt               # 构建配置
-```
-
-## 3. LCD 驱动实现对比
-
-### 3.1 d zbj 项目 LCD 实现
-
-**核心文件**：`/Users/rdzleo/Desktop/dzbj/main/lcd/lcd.c`
-
-**实现特点**：
-- 使用 QSPI 接口驱动 ST77916 LCD 控制器
-- 直接调用 ESP-IDF 提供的 LCD 相关 API
-- 分步骤初始化：SPI 总线 → LCD IO → LCD 面板 → 重置和初始化面板
-- 支持触摸功能（CST816S 触摸控制器）
-- 配置了双缓冲和 DMA 传输
-
-**关键代码**：
-```c
-void lcd_init(){
-    const spi_bus_config_t buscfg = ST77916_PANEL_BUS_QSPI_CONFIG(...);
-    spi_bus_initialize(SPI_LCD_HOST, &buscfg, SPI_DMA_CH_AUTO);
-    const esp_lcd_panel_io_spi_config_t io_config = ST77916_PANEL_IO_QSPI_CONFIG(...);
-    ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi(...));
-    const st77916_vendor_config_t vendor_config = {
-        .flags = {
-            .use_qspi_interface = 1,
-        },
-    };
-    const esp_lcd_panel_dev_config_t panel_config = {...};
-    ESP_ERROR_CHECK(esp_lcd_new_panel_st77916(...));
-    esp_lcd_panel_reset(panel_handle);
-    esp_lcd_panel_init(panel_handle);
-    esp_lcd_panel_disp_on_off(panel_handle, true);
-}
-```
-
-### 3.2 QSPI LCD 驱动版本实现
-
-**核心文件**：通过 `display_manager_init()` 函数实现
-
-**实现特点**：
-- 使用显示管理器和触摸管理器的抽象层
-- 封装了 LCD 初始化的细节
-- 提供统一的接口函数
-- 结构更清晰，职责更明确
-
-**关键代码**：
-```c
-void app_main(void) {
-    // 初始化显示管理器
-    esp_err_t ret = display_manager_init();
-    if (ret != ESP_OK) {
-        ESP_LOGE(TAG, "显示管理器初始化失败: %s", esp_err_to_name(ret));
-        return;
-    }
-
-    // 获取显示驱动
-    lv_disp_t *display = display_manager_get_display();
-    if (display == NULL) {
-        ESP_LOGE(TAG, "获取显示驱动失败");
-        return;
-    }
-
-    // 初始化触摸管理器
-    ret = touch_manager_init(display);
-    if (ret != ESP_OK) {
-        ESP_LOGE(TAG, "触摸管理器初始化失败: %s", esp_err_to_name(ret));
-        return;
-    }
-}
-```
-
-### 3.3 驱动实现对比分析
-
-| 对比项 | d zbj 项目 | QSPI LCD 驱动版本 |
-|--------|-----------|-------------------|
-| 接口方式 | 直接调用 ESP-IDF API | 使用抽象层管理器 |
-| 代码复杂度 | 相对复杂，包含更多细节 | 更简洁，封装了细节 |
-| 可维护性 | 模块化但分散 | 集中管理，更易维护 |
-| 灵活性 | 高度灵活，可自定义各环节 | 标准化流程，灵活性稍低 |
-| 初始化流程 | 线性初始化各组件 | 分层初始化，结构更清晰 |
-| 错误处理 | 基本错误检查 | 详细的错误处理和日志 |
-
-## 4. 初始化流程对比
-
-### 4.1 d zbj 项目初始化流程
-
-**核心文件**：`/Users/rdzleo/Desktop/dzbj/main/main.c`
-
-**初始化顺序**：
-1. `i2c_init()` - 初始化 I2C 总线
-2. `nvs_init()` - 初始化 NVS 存储
-3. `lcd_init()` - 初始化 LCD 面板
-4. `touch_init()` - 初始化触摸控制器
-5. `lvgl_lcd_init()` - 初始化 LVGL 显示
-6. `fatfs_init()` - 初始化文件系统
-7. `pwm_init()` - 初始化 PWM 背光
-8. `app_test_display()` - 显示测试屏幕
-
-### 4.2 QSPI LCD 驱动版本初始化流程
-
-**核心文件**：`/Users/rdzleo/Desktop/qspi_lcd_驱动版本/main/main.c`
-
-**初始化顺序**：
-1. `display_manager_init()` - 初始化显示管理器
-2. `display_manager_get_display()` - 获取显示驱动
-3. 创建 LVGL 任务
-4. 等待 LVGL 任务启动
-5. `ui_init()` - 初始化 SquareLine Studio UI
-6. 等待 LVGL 完成初始渲染
-7. `touch_manager_init(display)` - 初始化触摸管理器
-8. 控制 LCD 开关状态
-
-## 5. 技术选型对比
-
-### 5.1 硬件平台
-
-- **d zbj 项目**：ESP32-S3 系列
-- **QSPI LCD 驱动版本**：ESP32-S3 系列
-
-### 5.2 LCD 控制器
-
-- **d zbj 项目**：ST77916S
-- **QSPI LCD 驱动版本**：ST77916S
-
-### 7.3 通信接口
-
-- **d zbj 项目**：QSPI（LCD）、I2C（触摸）
-- **QSPI LCD 驱动版本**：QSPI（LCD）、I2C（触摸）
-
-### 7.4 软件框架
-
-- **d zbj 项目**：ESP-IDF + LVGL + SquareLine Studio
-- **QSPI LCD 驱动版本**：ESP-IDF + LVGL + SquareLine Studio
-
-### 7.5 SDK 配置对比
-
-| 配置项 | d zbj 项目 | QSPI LCD 驱动版本 |
-|--------|-----------|-------------------|
-| ESP-IDF 版本 | 5.4.2 | 最新稳定版 |
-| 编译器 | xtensa-esp32s3-elf-gcc | xtensa-esp32s3-elf-gcc |
-| 构建系统 | CMake | CMake |
-| 目标芯片 | esp32s3 | esp32s3 |
-
-### 7.6 LVGL 配置对比
-
-| 配置项 | d zbj 项目 | QSPI LCD 驱动版本 |
-|--------|-----------|-------------------|
-| LVGL 版本 | 8.3.11 | 8.3.11 |
-| 颜色深度 | 16位 (CONFIG_LV_COLOR_DEPTH_16=y) | 16位 (CONFIG_LV_COLOR_DEPTH_16=y) |
-| 字节交换 | 启用 (CONFIG_LV_COLOR_16_SWAP=y) | 启用 (CONFIG_LV_COLOR_16_SWAP=y) |
-| 内存大小 | 64KB (CONFIG_LV_MEM_SIZE_KILOBYTES=64) | 32KB (CONFIG_LV_MEM_SIZE_KILOBYTES=32) |
-| 显示缓冲 | 双缓冲，支持 DMA | 双缓冲，支持 DMA |
-| 任务优先级 | 4 | 4 |
-| 任务堆栈大小 | 8192 | 8192 |
-
-### 7.7 显示缓冲区配置对比
-
-| 配置项 | d zbj 项目 | QSPI LCD 驱动版本 |
-|--------|-----------|-------------------|
-| 缓冲区大小计算 | `LCD_WID*LCD_HIGH/5` | `EXAMPLE_LCD_H_RES * EXAMPLE_LVGL_DRAW_BUF_LINES` (360*30) |
-| 内存分配方式 | ESP-IDF 标准内存分配 | `spi_bus_dma_memory_alloc` 专门为 SPI DMA 分配 |
-| 双缓冲 | 启用 | 启用 |
-| DMA 支持 | 启用 | 启用 |
-| 刷新机制 | LVGL 标准刷新 | 自定义回调 `example_notify_lvgl_flush_ready` |
-
-### 7.8 UI 文件对比
-
-| 对比项 | d zbj 项目 | QSPI LCD 驱动版本 |
-|--------|-----------|-------------------|
-| SquareLine Studio 版本 | 相同版本 | 相同版本 |
-| UI 导出格式 | 压缩的 PNG 格式 | 压缩的 PNG 格式 |
-| 屏幕数量 | 包含多个屏幕（Home、Set、Img） | 包含多个屏幕（Home、Set、Img） |
-| 图片资源 | 包含相同的图片资源 | 包含相同的图片资源 |
-| 组件结构 | 完全相同的组件结构 | 完全相同的组件结构 |
-| 事件处理 | 相同的事件处理机制 | 相同的事件处理机制 |
-
-### 7.9 关键差异分析
-
-1. **内存分配方式**：
-   - qspi_lcd_驱动版本使用 `spi_bus_dma_memory_alloc` 专门为 SPI DMA 传输分配内存
-   - d zbj 项目使用标准内存分配，可能不是最优的 DMA 内存
-
-2. **显示缓冲区配置**：
-   - qspi_lcd_驱动版本使用固定的 30 行作为缓冲区大小
-   - d zbj 项目使用 `LCD_WID*LCD_HIGH/5` 计算缓冲区大小
-
-3. **初始化流程**：
-   - qspi_lcd_驱动版本使用管理器模式，分层初始化，包含详细的错误处理
-   - d zbj 项目使用线性初始化流程，错误处理相对简单
-
-4. **刷新回调**：
-   - qspi_lcd_驱动版本实现了自定义的 `example_notify_lvgl_flush_ready` 回调
-   - d zbj 项目使用 LVGL 标准刷新机制
-
-### 7.10 花屏问题分析
-
-基于以上对比，导致 d zbj 项目花屏的可能原因包括：
-
-1. **内存分配问题**：
-   - 未使用 `spi_bus_dma_memory_alloc` 分配适合 DMA 传输的内存
-   - 可能导致 DMA 传输数据错误，引起花屏
-
-2. **显示缓冲区配置**：
-   - `LCD_WID*LCD_HIGH/5` 计算出的缓冲区大小可能不合适
-   - 缓冲区过小可能导致显示不完整，过大可能导致内存不足
-
-3. **初始化流程问题**：
-   - 初始化顺序可能影响硬件状态
-   - 缺少必要的初始化步骤或延迟
-
-4. **刷新机制问题**：
-   - 缺少自定义的刷新就绪回调
-   - 可能导致 LVGL 与硬件刷新不同步
-
-## 7. 解决方案
-
-### 7.1 具体措施
-
-1. **优化内存分配**：
-   - 使用 `spi_bus_dma_memory_alloc` 专门为 SPI DMA 传输分配内存
-   - 确保内存对齐和连续性，提高 DMA 传输效率
-
-2. **调整缓冲区配置**：
-   - 参考 QSPI LCD 驱动版本，使用固定行数的缓冲区大小（如 30 行）
-   - 确保缓冲区大小合理，避免内存不足或浪费
-
-3. **改进刷新机制**：
-   - 实现自定义的 `notify_lvgl_flush_ready` 回调
-   - 确保 LVGL 与硬件刷新同步，减少显示异常
-
-4. **优化初始化流程**：
-   - 参考 QSPI LCD 驱动版本的管理器模式
-   - 确保初始化顺序正确，添加必要的延迟
-   - 增加详细的错误处理和日志输出
-
-## 8. 结论
-
-通过对两个项目的详细对比分析，我们发现导致 d zbj 项目花屏的主要原因是：
-
-1. **内存分配方式不当**：未使用专门的 `spi_bus_dma_memory_alloc` 函数分配适合 DMA 传输的内存
-2. **显示缓冲区配置不合理**：缓冲区大小计算方式可能导致内存使用不当
-3. **刷新机制不同步**：缺少自定义的刷新就绪回调，可能导致 LVGL 与硬件刷新不同步
-4. **初始化流程差异**：初始化顺序和错误处理的差异可能影响硬件状态
-
-采用 QSPI LCD 驱动版本的实现方式，特别是内存分配、缓冲区配置和刷新机制的优化，可以有效解决 d zbj 项目的花屏问题，提高 LVGL 适配的稳定性和可靠性。
-
+一、全尺寸图片 + BLE 同时运行需要多少 SRAM？
+逐项计算：
+
+内存需求	大小	说明
+JPEG 输入缓冲	~50 KB	从 SPIFFS 读取压缩文件
+JPEG 输出缓冲	253 KB	360×360×2 RGB565（必须连续）
+JPEG 解码工作区	~3 KB	TjpgDec scratchpad
+LVGL .bss 静态	~50 KB	对象池、样式缓存等
+LVGL 帧缓冲	~21 KB	360×30×2 行缓冲
+FreeRTOS 核心	~15 KB	idle + timer + main 任务栈
+SPI 驱动 + DMA	~12 KB	LCD SPI 传输
+SPIFFS + VFS	~10 KB	文件系统缓存
+I2C + 触摸驱动	~5 KB	CST816S
+BLE 协议栈	~70-80 KB	Bluedroid GATTS + controller
+BLE 图片接收缓冲	~10 KB	分包接收临时缓冲
+系统杂项	~20 KB	HAL/heap管理/日志/NVS等
+总计	~520-530 KB	峰值（BLE接收+解码同时）
+如果 BLE 和图片显示分时复用（先关 BLE 再解码）：
+
+场景	峰值 SRAM
+仅显示图片（无 BLE）	~440 KB
+仅 BLE 接收（无图片解码）	~270 KB
+推荐安全余量	+20% ≈ 530 KB
+结论：需要至少 ~450KB 可用堆内存，推荐 512KB+ SRAM 或带 PSRAM 的方案。
+
+二、ESP32 各型号对比
+ESP32-C 系列（RISC-V 单核，低成本低功耗路线）
+型号	SRAM	PSRAM 支持	能否满足需求	参考价格(模组)
+ESP32-C3 (当前)	400 KB	不支持	不能 (堆249KB < 253KB输出缓冲)	~¥8-12
+ESP32-C6	512 KB	支持外部 SPI RAM	勉强可以（无PSRAM时堆~350KB，仍紧张）	~¥12-18
+ESP32-C5	320 KB	待确认	不能	尚未量产
+ESP32-S 系列（Xtensa 双核，高性能路线）
+型号	SRAM	PSRAM	能否满足需求	参考价格(模组)
+ESP32-S3-N4	512 KB	无	勉强（分时复用可行）	~¥15-20
+ESP32-S3-N4R2	512 KB	2 MB (Quad SPI)	完全满足	~¥18-22
+ESP32-S3-N8R8	512 KB	8 MB (Octal SPI)	完全满足，富裕	~¥22-28
+ESP32-S3-N16R8	512 KB	8 MB (Octal SPI)	完全满足	~¥25-32
+三、综合推荐
+最佳性价比推荐：ESP32-S3-WROOM-1-N4R2
+理由：
+
+内存充裕：512KB SRAM + 2MB PSRAM
+
+JPEG 输出缓冲(253KB) 放 PSRAM → SRAM 零压力
+BLE + 图片显示可同时运行，不需要分时复用
+heap_caps_malloc(size, MALLOC_CAP_SPIRAM) 一行代码搞定
+与当前项目兼容性最高：
+
+ESP-IDF v5.4 完全支持
+SPI LCD 驱动代码基本不变（ST77916 驱动已适配）
+I2C 触摸驱动完全不变
+LVGL 代码完全不变
+BLE 代码完全不变（Bluedroid API 通用）
+原项目就是从 ESP32-S3 适配来的，回迁难度最低
+性价比：
+
+模组单价 ~¥18-22（淘宝散件）
+比 N4 只贵 ¥3-5，但多了 2MB PSRAM
+2MB PSRAM 对这个项目绰绰有余（只需 253KB）
+不需要 N8R8：
+
+8MB PSRAM 对这个项目严重过剩
+Octal SPI PSRAM 会多占用 GPIO（虽然 S3 GPIO 充裕）
+价格高 ¥5-10，没必要
+如果必须留在 C 系列：ESP32-C6 + 外部 PSRAM
+ESP32-C6 支持外部 SPI RAM，但需要额外的 PSRAM 芯片
+增加 BOM 成本和 PCB 复杂度
+生态不如 S3 成熟
+不推荐（总成本可能比 S3 模组还高）
+迁移工作量评估
+迁移项	难度	说明
+GPIO 引脚重映射	低	改 gpio.h 中的宏定义
+SPI LCD 驱动	无需改	esp_lcd + ST77916 驱动通用
+I2C 触摸	无需改	CST816S 驱动通用
+LVGL	无需改	esp_lvgl_port 通用
+JPEG 解码	改 1 行	去掉 JPEG_IMAGE_SCALE_1_2，去掉 lv_img_set_zoom(512)
+PSRAM 图片缓冲	改 1 行	malloc() → heap_caps_malloc(size, MALLOC_CAP_SPIRAM)
+BLE	低	Bluedroid API 通用，可能需调整 controller 配置
+sdkconfig	低	idf.py set-target esp32s3 后重新配置
+总结：ESP32-S3-N4R2 是当前项目升级的最优选择，迁移成本极低（核心代码几乎不变），只需改 2-3 行代码就能实现全尺寸无损图片显示 + BLE 同时运行。
\ No newline at end of file