Rdzleo
5eddd2aa72
✨ 新增功能 - 按键驱动模块：GPIO中断+软件去抖，支持BOOT和KEY2按键事件回调 - 休眠管理器：10秒无操作自动休眠，触摸/按键唤醒，UI集成开关 - 电池电量监控：GPIO3 ADC实时检测，ScreenSet界面圆弧显示 🐛 Bug修复 - 修复FreeRTOS任务栈溢出导致内存损坏（battery任务栈2048→4096） - 修复图片文件名损坏问题（改用静态缓冲区替代动态分配） - 修复触摸中断引脚配置错误（GPIO4→GPIO5，匹配V1.0硬件） - 修复开机闪烁问题（调整背光初始化时序，UI渲染后再点亮） 🎨 界面优化 - ScreenSet恢复为标准Screen切换方式（移除浮动面板架构） - 亮度调节支持0%（完全关闭）和10-100%范围 - ScreenHome界面电量显示独立（不关联实时电量） - 手势导航优化：下拉显示设置，上滑返回主界面 ⚡ 性能优化 - 启动时间优化：从650ms缩短至170ms - 内存管理优化：图片列表使用静态数组（10×32字节） - 任务栈配置调优：battery 4096, button 3072, sleep_mgr 3072 📝 其他改进 - CMakeLists.txt添加新模块编译配置 - 添加硬件版本兼容性注释（GPIO引脚说明） - 完善函数注释和错误日志输出 - sdkconfig配置更新 Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-P4 | ESP32-S2 | ESP32-S3 | Linux |
|---|
Hello World Example
Starts a FreeRTOS task to print "Hello World".
(See the README.md file in the upper level 'examples' directory for more information about examples.)
How to use example
Follow detailed instructions provided specifically for this example.
Select the instructions depending on Espressif chip installed on your development board:
Example folder contents
The project hello_world contains one source file in C language hello_world_main.c. The file is located in folder main.
ESP-IDF projects are built using CMake. The project build configuration is contained in CMakeLists.txt files that provide set of directives and instructions describing the project's source files and targets (executable, library, or both).
Below is short explanation of remaining files in the project folder.
├── CMakeLists.txt
├── pytest_hello_world.py Python script used for automated testing
├── main
│ ├── CMakeLists.txt
│ └── hello_world_main.c
└── README.md This is the file you are currently reading
For more information on structure and contents of ESP-IDF projects, please refer to Section Build System of the ESP-IDF Programming Guide.
Troubleshooting
-
Program upload failure
- Hardware connection is not correct: run
idf.py -p PORT monitor, and reboot your board to see if there are any output logs. - The baud rate for downloading is too high: lower your baud rate in the
menuconfigmenu, and try again.
- Hardware connection is not correct: run
Technical support and feedback
Please use the following feedback channels:
- For technical queries, go to the esp32.com forum
- For a feature request or bug report, create a GitHub issue
We will get back to you as soon as possible.