I (49) WeatherApi: 初始化天气API配置 - 默认城市: 北京 I (49) WeatherApi: WiFi位置缓存限制已设置为: 5 条 I (50) coexist: coex firmware version: 7b9a184 I (50) coexist: coexist rom version e7ae62f I (51) main_task: Started on CPU0 I (61) main_task: Calling app_main() I (81) BackgroundTask: background_task started I (81) BluetoothProvisioning: 蓝牙配网对象创建完成 I (81) button: IoT Button Version: 3.5.0 I (81) gpio: GPIO[0]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 I (81) button: IoT Button Version: 3.5.0 I (81) gpio: GPIO[4]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 I (81) Airhub1: 初始化按钮... I (81) Airhub1: Boot button initialized on GPIO0 I (81) Airhub1: Volume up button initialized on GPIO-1 I (81) Airhub1: Volume down button initialized on GPIO-1 I (81) Airhub1: 故事按键已初始化，GPIO引脚 =4 I (81) Airhub1: 所有按键已成功初始化！ I (81) Airhub1: Initializing I2C master bus for audio codec... I (81) Airhub1: Scanning I2C bus for devices... I (81) Airhub1: I2C设备在线: 0x18 E (81) i2c.master: I2C transaction unexpected nack detected E (81) i2c.master: s_i2c_synchronous_transaction(945): I2C transaction failed E (81) i2c.master: i2c_master_receive(1261): I2C transaction failed E (81) i2c.master: I2C transaction unexpected nack detected E (81) i2c.master: s_i2c_synchronous_transaction(945): I2C transaction failed E (81) i2c.master: i2c_master_receive(1261): I2C transaction failed I (81) Airhub1: I2C设备在线: 0x40 I (81) Airhub1: I2C scan completed. Found 2 devices I (81) Airhub1: IMU传感器未初始化，跳过IoT注册 I (81) Airhub1: Initializing battery monitor... I (81) Airhub1: ADC calibration initialized I (81) Airhub1: 电池状态监控已初始化，GPIO:6 I (81) Airhub1: 非生产测试模式且不在对话状态，姿态传感器业务已禁用以节约资源 I (81) PowerSaveTimer: Power save timer enabled I (81) Airhub1: 🔋 PowerSaveTimer已启用，20秒无活动将进入低功耗模式 I (81) Airhub1: 在构造函数完成后调用触摸初始化 I (81) Application: 打印设置设备状态日志: starting I (91) Application: 正常启动流程，将执行开机播报和网络连接播报 I (91) Airhub1: Initializing audio codec... I (91) Airhub1: Creating BoxAudioCodec (ES8311+ES7210, without reference) ... I (91) BoxAudioCodec: Duplex channels created I (91) ES8311: Work in Slave mode I (101) gpio: GPIO[48]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 I (101) ES7210: Work in Slave mode I (111) ES7210: Enable ES7210_INPUT_MIC1 I (111) ES7210: Enable ES7210_INPUT_MIC2 I (111) BoxAudioCodec: BoxAudioDevice initialized I (111) Airhub1: Audio codec initialized successfully I (111) Application: 检测到WiFi板卡，将opus编码器复杂度设置为3 I (111) OpusResampler: Resampler configured with input sample rate 16000, output sample rate 8000, and channels 1 I (121) I2S_IF: channel mode 2 bits:16/16 channel:2 mask:1 I (121) I2S_IF: TDM Mode 0 bits:16/16 channel:2 sample_rate:16000 mask:1 I (121) I2S_IF: channel mode 0 bits:16/16 channel:2 mask:1 I (121) I2S_IF: STD Mode 1 bits:16/16 channel:2 sample_rate:16000 mask:1 I (121) ES7210: Bits 16 I (121) ES7210: Enable ES7210_INPUT_MIC1 I (131) ES7210: Enable ES7210_INPUT_MIC2 I (131) ES7210: Unmuted I (131) Adev_Codec: Open codec device OK I (141) BoxAudioCodec: Input opened: sr=16000 ch=1 mask=0x1 ref=0 I (141) AudioCodec: Set input enable to true I (141) I2S_IF: channel mode 0 bits:16/16 channel:2 mask:1 I (141) I2S_IF: STD Mode 1 bits:16/16 channel:2 sample_rate:16000 mask:1 I (151) Adev_Codec: Open codec device OK I (151) AudioCodec: Set output enable to true I (151) AudioCodec: Audio codec started I (251) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (251) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (351) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (351) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (451) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (451) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (551) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (551) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (651) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (651) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (751) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (751) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (851) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (851) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (951) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (951) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (1051) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (1051) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (1081) Airhub1: 开始延迟初始化触摸板... I (1081) Airhub1: 初始化触摸板... I (1081) Airhub1: 配置触摸传感器... I (1081) Airhub1: 校准触摸阈值... I (1081) Airhub1: 触摸板 0 初始原始值: 3578511 I (1081) Airhub1: 触摸板 0 设置固定阈值: 5000 I (1081) Airhub1: 触摸板 1 初始原始值: 3995179 I (1081) Airhub1: 触摸板 1 设置固定阈值: 5000 I (1081) Airhub1: 触摸板 2 初始原始值: 3791182 I (1081) Airhub1: 触摸板 2 设置固定阈值: 5000 I (1081) Airhub1: 触摸板 3 初始原始值: 4048727 I (1081) Airhub1: 触摸板 3 设置固定阈值: 5000 I (1081) Airhub1: 启用触摸传感器滤波器 I (1081) Airhub1: 触摸阈值校准完成，使用固定阈值: 5000 I (1081) Airhub1: 创建触摸事件队列... I (1081) Airhub1: 注册触摸中断处理程序... I (1081) Airhub1: 创建触摸事件任务... I (1081) Airhub1: 触摸事件任务启动 I (1081) Airhub1: 触摸事件任务开始主循环 I (1081) Airhub1: 所有触摸状态已重置 I (1081) Airhub1: 设置触摸监控... I (1081) Airhub1: 触摸板初始化完成 I (1151) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (1151) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (1181) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (1181) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (1251) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (1251) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (1351) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (1351) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (1451) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (1451) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (1551) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (1551) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (1651) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (1651) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (1751) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (1751) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (1851) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (1851) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (1951) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (1951) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (2051) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (2051) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (2151) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (2151) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 I (2151) AudioCodec: 将运行时输出音量设置为：80 I (2151) Application: 设备启动完成，播放开机播报语音 I (2151) pp: pp rom version: e7ae62f I (2151) net80211: net80211 rom version: e7ae62f I (2161) wifi:wifi driver task: 3fce48b4, prio:23, stack:6656, core=0 I (2161) wifi:wifi firmware version: bea31f3 I (2161) wifi:wifi certification version: v7.0 I (2161) wifi:config NVS flash: disabled I (2161) wifi:config nano formatting: disabled I (2161) wifi:Init data frame dynamic rx buffer num: 32 I (2161) wifi:Init dynamic rx mgmt buffer num: 5 I (2161) wifi:Init management short buffer num: 32 I (2161) wifi:Init static tx buffer num: 16 I (2161) wifi:Init tx cache buffer num: 32 I (2161) wifi:Init static tx FG buffer num: 2 I (2161) wifi:Init static rx buffer size: 1600 I (2161) wifi:Init static rx buffer num: 16 I (2161) wifi:Init dynamic rx buffer num: 32 I (2161) wifi_init: rx ba win: 16 I (2161) wifi_init: accept mbox: 6 I (2161) wifi_init: tcpip mbox: 32 I (2161) wifi_init: udp mbox: 6 I (2161) wifi_init: tcp mbox: 6 I (2161) wifi_init: tcp tx win: 5760 I (2161) wifi_init: tcp rx win: 5760 I (2161) wifi_init: tcp mss: 1440 I (2161) wifi_init: WiFi/LWIP prefer SPIRAM I (2161) phy_init: phy_version 701,f4f1da3a,Mar 3 2025,15:50:10 I (2191) wifi:mode : sta (d0:cf:13:03:bb:f0) I (2191) wifi:enable tsf I (2201) Application: 开始播放下行音频: 样本=960 采样率=16000 I (4601) wifi: 发现可连接 AP: airhub, BSSID: 70:2a:d7:85:bc:eb, RSSI: -35, Channel: 1, Authmode: 3 I (4611) WifiBoard: Starting WiFi connection, playing network connection sound W (4611) wifi:Password length matches WPA2 standards, authmode threshold changes from OPEN to WPA2 I (4691) wifi:new:<1,0>, old:<1,0>, ap:<255,255>, sta:<1,0>, prof:1, snd_ch_cfg:0x0 I (4691) wifi:state: init -> auth (0xb0) I (4721) wifi:state: auth -> assoc (0x0) I (4741) wifi:state: assoc -> run (0x10) I (4751) wifi:connected with airhub, aid = 1, channel 1, BW20, bssid = 70:2a:d7:85:bc:eb I (4761) wifi:security: WPA2-PSK, phy: bgn, rssi: -33 I (4761) wifi:pm start, type: 1 I (4761) wifi:dp: 1, bi: 102400, li: 3, scale listen interval from 307200 us to 307200 us I (4761) wifi:set rx beacon pti, rx_bcn_pti: 14, bcn_timeout: 25000, mt_pti: 14, mt_time: 10000 I (4761) wifi:AP's beacon interval = 102400 us, DTIM period = 1 I (5081) Airhub1: 📤 电量上报功能已启用，每30秒上报一次 I (6301) wifi:idx:0 (ifx:0, 70:2a:d7:85:bc:eb), tid:0, ssn:0, winSize:64 I (8781) wifi: Got IP: 192.168.124.47 I (8781) esp_netif_handlers: sta ip: 192.168.124.47, mask: 255.255.255.0, gw: 192.168.124.1 I (10821) VolcRtcProtocol: 设置Agent配置参数: {"Config":{"WebSearchAgentConfig":{"ParamsString":"{\"bot_id\":\"7585449675889608233\",\"stream\":true,\"location_info\":{\"city\":\"广州市\"}}"}}} I (10821) VolcRtcProtocol: VolcRtcProtocol 开始启动... I (10821) VolcRtcProtocol: 使用Wi-Fi MAC地址作为设备名称(已替换冒号为下划线): d0_cf_13_03_bb_f0 I (10821) VolcRtcProtocol: NVS凭证已加载：secret=1 appid=1 device_name=d0_cf_13_03_bb_f0, free_heap=8290496 [INF|volc_rtc.c:597]volc_rtc_create: set param[0]: {"debug":{"log_to_console":1}} [INF|volc_rtc.c:597]volc_rtc_create: set param[1]: {"audio":{"codec":{"internal":{"enable":1}}}} [INF|volc_rtc.c:597]volc_rtc_create: set param[2]: {"rtc":{"access":{"concurrent_requests":1}}} [INF|volc_rtc.c:597]volc_rtc_create: set param[3]: {"rtc":{"ice":{"concurrent_agents":1}}} 2026-02-02 11:07:18.214 [I] VolcEngineRTCLite.c:153 ****************** HELLO BOOKA (68f0bc7617b8520178bef12c)(1.57.207.001)(HASH-5c3aa20fe851886d21cede0115044e17c3ec8a67) ******************** 2026-02-02 11:07:18.214 [I] VolcEngineRTCLite.c:158 Platform esp32s3 2026-02-02 11:07:18.215 [I] VolcEngineRTCLite.c:161 OsVersion FreeRTOS/unknown 2026-02-02 11:07:18.215 [I] VolcEngineRTCLite.c:164 CompilerInfo GCC/14.2.0 2026-02-02 11:07:18.215 [I] VolcEngineRTCLite.c:100 BOOKA_DEVICE_LOW_RESOURCE : ON 2026-02-02 11:07:18.215 [I] VolcEngineRTCLite.c:104 BOOKA_ENABLE_EVENT_REPORT : ON 2026-02-02 11:07:18.216 [I] VolcEngineRTCLite.c:108 ENABLE_G722_CODEC : ON 2026-02-02 11:07:18.216 [I] GlobalParams.c:232 pGlobalParams->configParams.rtc.access.concurrent_requests from 2 to 1 2026-02-02 11:07:18.216 [I] GlobalParams.c:233 pGlobalParams->configParams.rtc.ice.concurrent_agents from 2 to 1 2026-02-02 11:07:18.217 [I] GlobalParams.c:239 pGlobalParams->configParams.audio.codec.internal.enable from 0 to 1 2026-02-02 11:07:18.217 [I] GlobalParams.c:244 pGlobalParams->configParams.debug.log_to_console from 0 to 1 2026-02-02 11:07:18.217 [I] GlobalParams.c:247 pGlobalParams->configParams.rtc.root_path to . 2026-02-02 11:07:18.219 [E] Cache.c:273 operation returned status code: 0x00000009 2026-02-02 11:07:18.225 [E] SocketConnection-Lite.c:191 bind local ip failed 2026-02-02 11:07:18.228 [I] LiteResolver.c:213 start resolve rtc-log-service.volcvideo.com by sep thread 2026-02-02 11:07:18.231 [I] API byte_rtc_set_audio_codec engine 0x3c2eb4f0 audio_codec_type 4 2026-02-02 11:07:18.232 [I] API byte_rtc_set_video_codec engine 0x3c2eb4f0 video_codec_type 0 2026-02-02 11:07:18.233 [I] Common.c:82 rtcAudioCodec2SdkAudioCodec codec 5 I (10841) VolcRtcProtocol: RTC实例已准备就绪；房间加入将在监听状态后执行 I (10841) Application: 🌐 开始初始化WebSocket协议... I (10841) Application: 🔧 创建WebsocketProtocol实例 I (10841) Application: 🚀 启动WebSocket协议 I (10841) Application: ✅ WebSocket协议初始化完成 I (10841) VolcRtcProtocol: VolcRtcProtocol初始化任务已创建 I (10841) Application: 打印设置设备状态日志: idle I (10851) Application: Entering idle state, playing standby sound I (10851) WeatherApi: [AutoDetectAndSetLocation] 调用全局函数自动检测位置 I (10851) WeatherApi: [AutoDetectLocation] ===== 开始自动检测位置 ===== I (10851) WeatherApi: [AutoDetectLocation] 从NVS命中位置: '广州市'，已更新默认城市 I (10851) WeatherApi: [AutoDetectLocation] ===== 位置检测完成 ===== I (10851) main_task: Returned from app_main() 2026-02-02 11:07:18.266 [I] LiteResolver.c:213 start resolve access.rtc.volcvideo.com by sep thread 2026-02-02 11:07:18.267 [I] LiteResolver.c:213 start resolve rtc-log-info.volcvideo.com by sep thread I (11181) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (11181) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0 2026-02-02 11:07:18.901 [E] Cache.c:311 operation returned status code: 0x00000009 I (11531) wifi:idx:1 (ifx:0, 70:2a:d7:85:bc:eb), tid:7, ssn:0, winSize:64 2026-02-02 11:07:19.126 [I] IceAgent.c:2533 cur nominatedCandidatePair local 192.168.124.47:0 remote 183.2.197.178:50001 state ICE_CANDIDATE_PAIR_STATE_SUCCEEDED 2026-02-02 11:07:25.306 [E] EventReportControl.c:399 not match curSeqId: 1, responseSeqId: 19 I (20081) Airhub1: 🔋 进入低功耗模式：CPU降频、Light Sleep启用、功放关闭 I (20091) I2S_IF: Pending out channel for in channel running I (20091) AudioCodec: Set output enable to false I (20091) Airhub1: 🔊 功放已关闭 I (21181) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V I (21181) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0