Rdzleo/Baji_Rtc_Toy
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Baji_Rtc_Toy/05-最新日志.txt
Rdzleo 4e2f6906f9 feat: 启用 BLE 5.0 2M PHY 图传加速 + 移除未使用的 BluFi 组件 + BLE 断连内存泄漏修复 
1、dzbj_ble.c 新增 BLE 5.0 2M PHY 请求（连接时自动协商，不支持则回退 1M）；
2、dzbj_ble.c 新增 PHY 更新事件日志（tx_phy/rx_phy: 1=1M, 2=2M, 3=Coded）；
3、dzbj_ble.c 断连时清理未完成的图片传输状态，释放 img_data/filepath/file_img 防止内存泄漏；
4、移除未使用的 BluFi 组件依赖（Kconfig select、编译检查、sdkconfig），解除与 BLE 5.0 的兼容冲突；
5、sdkconfig.defaults 及生产环境配置统一启用 BLE 5.0 + 保留 BLE 4.2 legacy advertising 兼容；
6、新增 BLE 图片传输问题分析与优化建议文档（含 UniApp vs Flutter 对比分析，供 APP 开发者参考）；

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-03-24 17:12:35 +08:00

592 lines
37 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

I (47) WeatherApi: 初始化天气API配置 - 默认城市: 北京
I (48) WeatherApi: WiFi位置缓存限制已设置为: 5 条
I (48) coexist: coex firmware version: 7b9a184
I (49) coexist: coexist rom version e7ae62f
I (49) main_task: Started on CPU0
I (59) main_task: Calling app_main()
I (79) BackgroundTask: background_task started
I (79) BluetoothProvisioning: 蓝牙配网对象创建完成
I (79) WifiBoard: force_ap is set to 1, will clear in StartNetwork()
I (79) button: IoT Button Version: 3.5.0
I (79) gpio: GPIO[0]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
I (79) button: IoT Button Version: 3.5.0
I (79) gpio: GPIO[4]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
I (79) Airhub1: Initializing I2C master bus for audio codec...
I (79) Airhub1: Scanning I2C bus for devices...
I (79) Airhub1: I2C设备在线: 0x18
E (79) i2c.master: I2C transaction unexpected nack detected
E (79) i2c.master: s_i2c_synchronous_transaction(945): I2C transaction failed
E (79) i2c.master: i2c_master_receive(1261): I2C transaction failed
E (79) i2c.master: I2C transaction unexpected nack detected
E (79) i2c.master: s_i2c_synchronous_transaction(945): I2C transaction failed
E (79) i2c.master: i2c_master_receive(1261): I2C transaction failed
I (79) Airhub1: I2C设备在线: 0x40
I (79) Airhub1: I2C scan completed. Found 2 devices
I (79) DZBJ: 开始初始化显示硬件...
I (79) gpio: GPIO[7]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (79) st77916: LCD panel create success, version: 1.0.1
W (219) st77916: The 3Ah command has been used and will be overwritten by external initialization sequence
I (339) LCD: LCD GRAM cleared (black filled)
I (339) DZBJ: LCD 硬件初始化完成
I (339) gpio: GPIO[5]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:2
I (339) gpio: GPIO[6]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (739) CST816S: IC id: 182
I (739) LCD: Touch controller initialized successfully
I (739) LVGL: Starting LVGL task
I (739) LCD: LVGL buffer: 14400 bytes (W:360, Lines:20, DMA, single)
I (739) LCD: Touch controller added to LVGL
I (739) DZBJ: LVGL 初始化完成
I (849) Airhub1: 🤖 AI对话模式启动
I (849) Airhub1: 初始化按钮...
I (849) Airhub1: Boot button initialized on GPIO0
I (849) Airhub1: Volume up button initialized on GPIO-1
I (849) Airhub1: Volume down button initialized on GPIO-1
I (849) Airhub1: 故事按键已初始化，GPIO引脚 =4
I (849) Airhub1: 所有按键已成功初始化！
I (849) Airhub1: IMU传感器未初始化，跳过IoT注册
I (849) Airhub1: 配网模式：跳过电池检测、IMU传感器、低功耗管理
I (849) Airhub1: 电容触摸板按钮已禁用 (ENABLE_TOUCH_PAD_BUTTONS=0)
I (849) Application: 打印设置设备状态日志: starting
I (849) Application: 正常启动流程，将执行开机播报和网络连接播报
I (849) Airhub1: Initializing audio codec (output only)...
I (849) Airhub1: Creating BoxAudioCodec (ES8311, without reference) ...
I (849) BoxAudioCodec: TX-only channel created (provisioning mode)
I (849) ES8311: Work in Slave mode
I (859) gpio: GPIO[48]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (859) BoxAudioCodec: BoxAudioDevice initialized (output only)
I (859) Airhub1: Audio codec initialized successfully
I (859) Application: 配网模式：跳过 Opus 编码器、输入重采样器、麦克风输入
I (859) I2S_IF: channel mode 0 bits:16/16 channel:2 mask:1
I (859) I2S_IF: STD Mode 1 bits:16/16 channel:2 sample_rate:16000 mask:1
I (869) Adev_Codec: Open codec device OK
I (879) AudioCodec: Set output enable to true
I (879) AudioCodec: Audio codec started (output only, provisioning mode)
I (879) AudioCodec: 将运行时输出音量设置为：75
I (879) Application: 设备启动完成，播放开机播报语音
I (889) WifiBoard: force_ap cleared to 0
I (889) WifiBoard: 🔵 进入配网模式 - BLE蓝牙配网
I (889) WifiBoard: 🔵 进入配网模式 - 使用BLE蓝牙配网
I (889) WifiBoard: 🔵 正在启动BLE蓝牙配网服务...
I (889) Application: 🎵 测试模式：音频开始播放，等待播放完成
I (889) Application: ✅ 测试模式：音频播放完成
I (889) BluetoothProvisioning: 🔄 配网状态变化: IDLE -> INITIALIZING
I (889) BluetoothProvisioning: 初始化WiFi...
I (889) pp: pp rom version: e7ae62f
I (889) net80211: net80211 rom version: e7ae62f
I (899) wifi:wifi driver task: 3fcd91c4, prio:23, stack:6656, core=0
I (899) wifi:wifi firmware version: bea31f3
I (899) wifi:wifi certification version: v7.0
I (899) wifi:config NVS flash: enabled
I (899) wifi:config nano formatting: disabled
I (899) wifi:Init data frame dynamic rx buffer num: 32
I (899) wifi:Init dynamic rx mgmt buffer num: 5
I (899) wifi:Init management short buffer num: 32
I (899) wifi:Init static tx buffer num: 8
I (899) wifi:Init tx cache buffer num: 32
I (899) wifi:Init static tx FG buffer num: 2
I (899) wifi:Init static rx buffer size: 1600
I (899) wifi:Init static rx buffer num: 10
I (899) wifi:Init dynamic rx buffer num: 32
I (909) wifi_init: rx ba win: 16
I (909) wifi_init: accept mbox: 6
I (909) wifi_init: tcpip mbox: 32
I (909) wifi_init: udp mbox: 6
I (909) wifi_init: tcp mbox: 6
I (909) wifi_init: tcp tx win: 5760
I (909) wifi_init: tcp rx win: 5760
I (909) wifi_init: tcp mss: 1440
I (909) wifi_init: WiFi/LWIP prefer SPIRAM
I (909) phy_init: phy_version 701,f4f1da3a,Mar 3 2025,15:50:10
I (949) wifi:mode : sta (d0:cf:13:03:bb:f0)
I (949) wifi:enable tsf
I (949) BluetoothProvisioning: WiFi初始化完成
I (949) BluetoothProvisioning: 初始化蓝牙控制器...
I (949) BLE_INIT: BT controller compile version [6cfabcd]
I (949) BLE_INIT: Feature Config, ADV:1, BLE_50:1, DTM:1, SCAN:1, CCA:0, SMP:1, CONNECT:1
I (949) BLE_INIT: Bluetooth MAC: d0:cf:13:03:bb:f2
I (949) BluetoothProvisioning: 初始化Bluedroid协议栈...
I (969) BluetoothProvisioning: 注册 BLE GAP/GATTS 回调...
I (969) BluetoothProvisioning: ✅ GATTS App 注册成功, gatts_if=3
I (969) BluetoothProvisioning: Service 创建成功, handle=40
I (969) BluetoothProvisioning: WRITE 特征添加成功, handle=42
I (969) BluetoothProvisioning: NOTIFY 特征添加成功, handle=44
I (969) BluetoothProvisioning: CCCD 添加成功, handle=45
I (969) BluetoothProvisioning: ✅ GATT Service 启动成功
I (969) BluetoothProvisioning: 注册WiFi事件处理器...
I (969) BluetoothProvisioning: 🔄 配网状态变化: INITIALIZING -> IDLE
I (969) BluetoothProvisioning: 蓝牙配网初始化完成 (GATT Server 模式)
I (969) BluetoothProvisioning: 蓝牙MAC地址: d0:cf:13:03:bb:f2
I (969) WifiBoard: 🔍 BLE Initialize返回结果: true
I (969) BluetoothProvisioning: 🔵 开始启动蓝牙配网服务 (GATT Server)...
I (969) BluetoothProvisioning: 🔍 检查初始化状态: initialized_ = true
I (969) BluetoothProvisioning: MAC地址发送状态已重置
I (969) BluetoothProvisioning: 🔄 MAC地址发送状态已重置
I (969) BluetoothProvisioning: 🧹 清除之前的WiFi凭据...
I (969) BluetoothProvisioning: ✅ WiFi凭据清除完成，准备接收新的配网信息
I (969) BluetoothProvisioning: 📡 蓝牙设备名称: Airhub_d0:cf:13:03:bb:f2
I (969) BluetoothProvisioning: 📡 广播数据构建完成，长度: 29 字节
I (969) BluetoothProvisioning: 📡 扫描响应数据构建完成，长度: 7 字节
I (969) BluetoothProvisioning: 📡 广播数据设置完成，配置扫描响应数据
I (969) BluetoothProvisioning: 📡 扫描响应数据设置完成，启动广播
I (969) BluetoothProvisioning: ✅ 广播启动成功
I (969) BluetoothProvisioning: 🔄 配网状态变化: IDLE -> ADVERTISING
I (969) BluetoothProvisioning: 蓝牙配网广播已启动，等待客户端连接...
I (969) WifiBoard: ✅ BLE蓝牙配网启动成功
I (979) WifiBoard: 📱 请使用支持BLE的手机APP连接设备进行配网
W (979) Application: Alert BLE配网模式: 请使用手机APP搜索Airhub_开头的蓝牙设备 [happy]
I (989) AI_CHAT_UI: GIF表情切换: happy
I (989) WifiBoard: Starting BLE provisioning monitor...
I (989) WifiBoard: 🔍 BLE配网启动结果: 成功
I (989) WifiBoard: ✅ BLE配网启动成功，等待手机连接
I (989) Application: 配网模式：跳过协议初始化、位置检测等网络业务
I (989) Application: 打印设置设备状态日志: idle
I (999) Application: 开始播放下行音频: 样本=960 采样率=16000
I (1009) AI_CHAT_UI: GIF表情切换: neutral
I (1009) main_task: Returned from app_main()
I (5339) BluetoothProvisioning: 📱 客户端已连接, conn_id=0, addr=73:8f:af:0d:36:7a
I (5339) BluetoothProvisioning: 🔍 [DEBUG] 设置client_connected_为true
I (5339) BluetoothProvisioning: MAC地址发送状态已重置
I (5339) BluetoothProvisioning: 🔄 MAC地址发送状态已重置
I (5339) BluetoothProvisioning: 🔄 配网状态变化: ADVERTISING -> CONNECTED
I (5339) WifiBoard: BLE client connected
I (5339) BluetoothProvisioning: 🔍 [DEBUG] BLE连接处理完成，client_connected_=true
I (5339) BluetoothProvisioning: 广播已停止
I (5749) BluetoothProvisioning: 连接参数更新: status=0, conn_int=24, latency=0, timeout=400
I (6079) BluetoothProvisioning: 连接参数更新: status=0, conn_int=6, latency=0, timeout=500
I (6149) BluetoothProvisioning: MTU 更新: 512
I (6229) BluetoothProvisioning: 连接参数更新: status=0, conn_int=24, latency=0, timeout=400
I (6649) BluetoothProvisioning: NOTIFY 已启用
I (6829) BluetoothProvisioning: 📱 手机请求获取WiFi列表，开始扫描
W (6829) wifi:Error! Should use default active scan time parameter for WiFi scan when Bluetooth is enabled!!!!!!
I (6829) BluetoothProvisioning: 🔍 WiFi扫描已启动
I (13489) AudioCodec: Set output enable to false
I (15599) BluetoothProvisioning: 📡 WiFi扫描完成，准备发送WiFi列表
I (15599) BluetoothProvisioning: 📊 扫描到 41 个WiFi热点
I (15599) BluetoothProvisioning: ✅ 成功获取WiFi扫描结果
I (15609) BluetoothProvisioning: 📊 过滤后剩余 26 个2.4GHz热点 (原始: 41)
I (15609) BluetoothProvisioning: 向客户端发送WiFi列表，共26个AP
I (16129) BluetoothProvisioning: 📤 WiFi列表已发送给客户端，包含 26 个热点
I (16129) BluetoothProvisioning: 📤 WiFi列表已发送，包含 26 个热点
I (25099) BluetoothProvisioning: 📶 收到WiFi SSID: airhub
I (25249) BluetoothProvisioning: 🔐 收到WiFi密码 (长度: 9)
W (25249) wifi:Password length matches WPA2 standards, authmode threshold changes from OPEN to WPA2
I (25299) BluetoothProvisioning: 📡 已发起WiFi连接请求，启动超时监控
I (25299) WifiBoard: WiFi credentials received via BLE
I (25399) wifi:new:<1,0>, old:<1,0>, ap:<255,255>, sta:<1,0>, prof:1, snd_ch_cfg:0x0
I (25399) wifi:state: init -> auth (0xb0)
I (25429) wifi:state: auth -> assoc (0x0)
I (25439) wifi:state: assoc -> run (0x10)
I (25499) wifi:connected with airhub, aid = 4, channel 1, BW20, bssid = 70:2a:d7:85:bc:eb
I (25499) wifi:security: WPA2-PSK, phy: bgn, rssi: -32
I (25509) wifi:pm start, type: 1
I (25509) wifi:dp: 1, bi: 102400, li: 3, scale listen interval from 307200 us to 307200 us
I (25509) wifi:set rx beacon pti, rx_bcn_pti: 14, bcn_timeout: 25000, mt_pti: 14, mt_time: 10000
I (25509) BluetoothProvisioning: ✅ WiFi连接成功，SSID: airhub，等待获取IP地址
I (25529) wifi:AP's beacon interval = 102400 us, DTIM period = 1
I (25529) wifi:<ba-add>idx:0 (ifx:0, 70:2a:d7:85:bc:eb), tid:0, ssn:0, winSize:64
I (27229) esp_netif_handlers: sta ip: 192.168.124.22, mask: 255.255.255.0, gw: 192.168.124.1
I (27229) BluetoothProvisioning: ✅ WiFi获取IP地址成功: 192.168.124.22
I (27229) BluetoothProvisioning: 💾 启用WiFi配置自动保存到NVS存储...
I (27229) BluetoothProvisioning: ✅ WiFi配置将自动保存到NVS存储
I (27229) BluetoothProvisioning: 📋 获取当前WiFi配置成功，SSID: airhub
I (27229) SsidManager: compare [airhub:6] [airhub:6]
W (27229) SsidManager: SSID airhub already exists, overwrite it
I (27229) BluetoothProvisioning: ✅ WiFi凭据已保存到NVS列表
I (27229) BluetoothProvisioning: BluetoothProvisioning WIFI_CONNECTED skip_session=0
I (27229) BluetoothProvisioning: 🔍 准备设置状态为SUCCESS并触发回调
I (27229) BluetoothProvisioning: 🔄 配网状态变化: CONNECTED -> SUCCESS
I (27229) WifiBoard: 设备配网成功,已连接到WiFi网络!
I (27229) BluetoothProvisioning: 🔍 [DEBUG] ReportWiFiStatus调用: success=true, client_connected_=true
I (27229) BluetoothProvisioning: 向客户端报告设备连接WiFi成功!
I (27229) BluetoothProvisioning: 📋 配网流程完成，状态: SUCCESS, client_connected_: true
I (27229) BluetoothProvisioning: ⏰ 延迟2000ms后重启设备以确保配置生效...
I (27989) WifiBoard: BLE provisioning completed successfully
I (27989) BluetoothProvisioning: 停止蓝牙配网...
I (27989) BluetoothProvisioning: 广播已停止
W (27989) BT_HCI: hci cmd send: disconnect: hdl 0x1, rsn:0x13
I (27989) BluetoothProvisioning: 📱 客户端已断开连接, reason=0x16, 当前状态: SUCCESS
I (27989) BluetoothProvisioning: 🔍 [DEBUG] 设置client_connected_为false
I (27989) BluetoothProvisioning: 🔄 配网状态变化: SUCCESS -> ADVERTISING
I (27989) WifiBoard: BLE client disconnected
I (27989) BluetoothProvisioning: 📡 广播数据设置完成，配置扫描响应数据
I (27989) BluetoothProvisioning: 📡 扫描响应数据设置完成，启动广播
I (27989) BluetoothProvisioning: 🔄 配网状态变化: ADVERTISING -> IDLE
I (27989) BluetoothProvisioning: 蓝牙配网已停止
E (27989) esp_netif_lwip: esp_netif_new_api: Failed to configure netif with config=0x3fcb5960 (config or if_key is NULL or duplicate key)
assert failed: esp_netif_create_default_wifi_sta wifi_default.c:422 (netif)
Backtrace: 0x40379d89:0x3fcb5800 0x40386cfd:0x3fcb5820 0x4038e465:0x3fcb5840 0x4215e6d7:0x3fcb5960 0x421083c9:0x3fcb5990 0x420262d2:0x3fcb5a70 0x420263c1:0x3fcb5aa0
--- 0x40379d89: panic_abort at /Users/rdzleo/esp/esp-idf/v5.4.2/esp-idf/components/esp_system/panic.c:469
--- 0x40386cfd: esp_system_abort at /Users/rdzleo/esp/esp-idf/v5.4.2/esp-idf/components/esp_system/port/esp_system_chip.c:87
--- 0x4038e465: __assert_func at /Users/rdzleo/esp/esp-idf/v5.4.2/esp-idf/components/newlib/assert.c:80
--- 0x4215e6d7: esp_netif_create_default_wifi_sta at /Users/rdzleo/esp/esp-idf/v5.4.2/esp-idf/components/esp_wifi/src/wifi_default.c:422
--- 0x421083c9: WifiStation::Start() at /Users/rdzleo/Desktop/Baji_Rtc_Toy/managed_components/78__esp-wifi-connect/wifi_station.cc:101
--- 0x420262d2: WifiBoard::MonitorBleProvisioning() at /Users/rdzleo/Desktop/Baji_Rtc_Toy/main/boards/common/wifi_board.cc:504
--- 0x420263c1: WifiBoard::StartBleProvisioning()::{lambda(void*)#1}::_FUN(void*) at /Users/rdzleo/Desktop/Baji_Rtc_Toy/main/boards/common/wifi_board.cc:426
--- (inlined by) _FUN at /Users/rdzleo/Desktop/Baji_Rtc_Toy/main/boards/common/wifi_board.cc:428
ELF file SHA256: bbf9adf60
Rebooting...
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0x2b (SPI_FAST_FLASH_BOOT)
Saved PC:0x42065eba
--- 0x42065eba: rw_schedule at ??:?
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x56c
load:0x403c8700,len:0x4
load:0x403c8704,len:0xb88
load:0x403cb700,len:0x2df4
entry 0x403c88f4
I (47) WeatherApi: 初始化天气API配置 - 默认城市: 北京
I (48) WeatherApi: WiFi位置缓存限制已设置为: 5 条
I (48) coexist: coex firmware version: 7b9a184
I (49) coexist: coexist rom version e7ae62f
I (49) main_task: Started on CPU0
I (59) main_task: Calling app_main()
I (79) BackgroundTask: background_task started
I (79) BluetoothProvisioning: 蓝牙配网对象创建完成
I (79) button: IoT Button Version: 3.5.0
I (79) gpio: GPIO[0]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
I (79) button: IoT Button Version: 3.5.0
I (79) gpio: GPIO[4]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
I (79) Airhub1: Initializing I2C master bus for audio codec...
I (79) Airhub1: Scanning I2C bus for devices...
I (79) Airhub1: I2C设备在线: 0x18
E (79) i2c.master: I2C transaction unexpected nack detected
E (79) i2c.master: s_i2c_synchronous_transaction(945): I2C transaction failed
E (79) i2c.master: i2c_master_receive(1261): I2C transaction failed
E (79) i2c.master: I2C transaction unexpected nack detected
E (79) i2c.master: s_i2c_synchronous_transaction(945): I2C transaction failed
E (79) i2c.master: i2c_master_receive(1261): I2C transaction failed
I (79) Airhub1: I2C设备在线: 0x40
I (79) Airhub1: I2C scan completed. Found 2 devices
I (79) DZBJ: 开始初始化显示硬件...
I (79) gpio: GPIO[7]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (79) st77916: LCD panel create success, version: 1.0.1
W (209) st77916: The 3Ah command has been used and will be overwritten by external initialization sequence
I (329) LCD: LCD GRAM cleared (black filled)
I (329) DZBJ: LCD 硬件初始化完成
I (329) gpio: GPIO[5]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:2
I (329) gpio: GPIO[6]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (729) CST816S: IC id: 182
I (729) LCD: Touch controller initialized successfully
I (729) LVGL: Starting LVGL task
I (729) LCD: LVGL buffer: 14400 bytes (W:360, Lines:20, DMA, single)
I (729) LCD: Touch controller added to LVGL
I (729) DZBJ: LVGL 初始化完成
I (839) Airhub1: 🤖 AI对话模式启动
I (839) Airhub1: 初始化按钮...
I (839) Airhub1: Boot button initialized on GPIO0
I (839) Airhub1: Volume up button initialized on GPIO-1
I (839) Airhub1: Volume down button initialized on GPIO-1
I (839) Airhub1: 故事按键已初始化，GPIO引脚 =4
I (839) Airhub1: 所有按键已成功初始化！
I (839) Airhub1: IMU传感器未初始化，跳过IoT注册
I (839) Airhub1: Initializing battery monitor...
I (839) Airhub1: ADC calibration initialized
I (839) Airhub1: 电池状态监控已初始化，GPIO:3
I (839) Airhub1: 非生产测试模式且不在对话状态，姿态传感器业务已禁用以节约资源
I (839) PowerSaveTimer: Power save timer enabled
I (839) Airhub1: 🔋 PowerSaveTimer已启用，20秒无活动将进入低功耗模式
I (839) Airhub1: 电容触摸板按钮已禁用 (ENABLE_TOUCH_PAD_BUTTONS=0)
I (839) Application: 打印设置设备状态日志: starting
I (839) Application: 正常启动流程，将执行开机播报和网络连接播报
I (839) Airhub1: Initializing audio codec (duplex)...
I (839) Airhub1: Creating BoxAudioCodec (ES8311+ES7210, without reference) ...
I (839) BoxAudioCodec: Duplex channels created
I (849) ES8311: Work in Slave mode
I (849) gpio: GPIO[48]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (849) ES7210: Work in Slave mode
I (859) ES7210: Enable ES7210_INPUT_MIC1
I (859) ES7210: Enable ES7210_INPUT_MIC2
I (869) BoxAudioCodec: BoxAudioDevice initialized (duplex)
I (869) Airhub1: Audio codec initialized successfully
I (869) Application: 检测到WiFi板卡，将opus编码器复杂度设置为3
I (869) OpusResampler: Resampler configured with input sample rate 16000, output sample rate 8000, and channels 1
I (869) I2S_IF: channel mode 2 bits:16/16 channel:2 mask:1
I (869) I2S_IF: TDM Mode 0 bits:16/16 channel:2 sample_rate:16000 mask:1
I (869) I2S_IF: channel mode 0 bits:16/16 channel:2 mask:1
I (869) I2S_IF: STD Mode 1 bits:16/16 channel:2 sample_rate:16000 mask:1
I (869) ES7210: Bits 16
I (879) ES7210: Enable ES7210_INPUT_MIC1
I (879) ES7210: Enable ES7210_INPUT_MIC2
I (889) ES7210: Unmuted
I (889) Adev_Codec: Open codec device OK
I (889) BoxAudioCodec: Input opened: sr=16000 ch=1 mask=0x1 ref=0
I (889) AudioCodec: Set input enable to true
I (889) I2S_IF: channel mode 0 bits:16/16 channel:2 mask:1
I (889) I2S_IF: STD Mode 1 bits:16/16 channel:2 sample_rate:16000 mask:1
I (909) Adev_Codec: Open codec device OK
I (909) AudioCodec: Set output enable to true
I (909) AudioCodec: Audio codec started
I (1009) Airhub1: ADC: 2379, 原始电压: 2.38V, 计算电池电压: 10.32V, 电量: 100%, 满电电压: 4.20V
I (1009) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (1109) Airhub1: ADC: 2377, 原始电压: 2.38V, 计算电池电压: 10.32V, 电量: 100%, 满电电压: 4.20V
I (1109) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (1209) Airhub1: ADC: 2377, 原始电压: 2.38V, 计算电池电压: 10.32V, 电量: 100%, 满电电压: 4.20V
I (1209) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (1329) Airhub1: ADC: 2376, 原始电压: 2.38V, 计算电池电压: 10.31V, 电量: 100%, 满电电压: 4.20V
I (1329) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (1429) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V
I (1429) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (1529) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V
I (1529) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (1649) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V
I (1649) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (1749) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V
I (1749) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (1869) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V
I (1869) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (1939) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V
I (1939) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (1969) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V
I (1969) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (2069) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V
I (2069) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (2169) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V
I (2169) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (2269) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V
I (2269) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (2369) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V
I (2369) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (2469) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V
I (2469) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (2569) Airhub1: ADC: 2375, 原始电压: 2.38V, 计算电池电压: 10.31V, 电量: 100%, 满电电压: 4.20V
I (2569) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (2669) Airhub1: ADC: 2375, 原始电压: 2.38V, 计算电池电压: 10.31V, 电量: 100%, 满电电压: 4.20V
I (2669) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (2769) Airhub1: ADC: 2375, 原始电压: 2.38V, 计算电池电压: 10.31V, 电量: 100%, 满电电压: 4.20V
I (2769) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (2939) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V
I (2939) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (2959) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V
I (2959) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (3059) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V
I (3059) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (3059) AudioCodec: 将运行时输出音量设置为：75
I (3059) Application: 设备启动完成，播放开机播报语音
I (3059) pp: pp rom version: e7ae62f
I (3059) net80211: net80211 rom version: e7ae62f
I (3069) wifi:wifi driver task: 3fcdc36c, prio:23, stack:6656, core=0
I (3069) wifi:wifi firmware version: bea31f3
I (3069) wifi:wifi certification version: v7.0
I (3069) wifi:config NVS flash: disabled
I (3069) wifi:config nano formatting: disabled
I (3069) wifi:Init data frame dynamic rx buffer num: 32
I (3069) wifi:Init dynamic rx mgmt buffer num: 5
I (3069) wifi:Init management short buffer num: 32
I (3069) wifi:Init static tx buffer num: 8
I (3069) wifi:Init tx cache buffer num: 32
I (3069) wifi:Init static tx FG buffer num: 2
I (3069) wifi:Init static rx buffer size: 1600
I (3069) wifi:Init static rx buffer num: 10
I (3069) wifi:Init dynamic rx buffer num: 32
I (3069) wifi_init: rx ba win: 16
I (3069) wifi_init: accept mbox: 6
I (3069) wifi_init: tcpip mbox: 32
I (3069) wifi_init: udp mbox: 6
I (3069) wifi_init: tcp mbox: 6
I (3069) wifi_init: tcp tx win: 5760
I (3069) wifi_init: tcp rx win: 5760
I (3069) wifi_init: tcp mss: 1440
I (3069) wifi_init: WiFi/LWIP prefer SPIRAM
I (3069) phy_init: phy_version 701,f4f1da3a,Mar 3 2025,15:50:10
I (3109) phy_init: Saving new calibration data due to checksum failure or outdated calibration data, mode(0)
I (3109) Application: 开始播放下行音频: 样本=960 采样率=16000
I (3119) wifi:mode : sta (d0:cf:13:03:bb:f0)
I (3129) wifi:enable tsf
I (5539) wifi: 发现可连接 AP: airhub, BSSID: 70:2a:d7:85:bc:eb, RSSI: -31, Channel: 1, Authmode: 3
I (5539) WifiBoard: Starting WiFi connection, playing network connection sound
W (5539) wifi:Password length matches WPA2 standards, authmode threshold changes from OPEN to WPA2
I (5639) wifi:new:<1,0>, old:<1,0>, ap:<255,255>, sta:<1,0>, prof:1, snd_ch_cfg:0x0
I (5639) wifi:state: init -> auth (0xb0)
I (5659) wifi:state: auth -> assoc (0x0)
I (5679) wifi:state: assoc -> run (0x10)
I (5709) wifi:connected with airhub, aid = 4, channel 1, BW20, bssid = 70:2a:d7:85:bc:eb
I (5709) wifi:security: WPA2-PSK, phy: bgn, rssi: -30
I (5709) wifi:pm start, type: 1
I (5709) wifi:dp: 1, bi: 102400, li: 3, scale listen interval from 307200 us to 307200 us
I (5709) wifi:set rx beacon pti, rx_bcn_pti: 14, bcn_timeout: 25000, mt_pti: 14, mt_time: 10000
I (5719) wifi:AP's beacon interval = 102400 us, DTIM period = 1
I (5749) wifi:<ba-add>idx:0 (ifx:0, 70:2a:d7:85:bc:eb), tid:0, ssn:0, winSize:64
I (6839) Airhub1: 📤 设备状态上报已启用，每30秒上报一次
I (9749) wifi: Got IP: 192.168.124.22
I (9749) esp_netif_handlers: sta ip: 192.168.124.22, mask: 255.255.255.0, gw: 192.168.124.1
I (10339) VolcRtcProtocol: 设置Agent配置参数: {"Config":{"WebSearchAgentConfig":{"ParamsString":"{\"bot_id\":\"7585449675889608233\",\"stream\":true,\"location_info\":{\"city\":\"广州市\"}}"}}}
I (10339) VolcRtcProtocol: VolcRtcProtocol 开始启动...
I (10339) VolcRtcProtocol: 使用配置文件中的设备名称: d0_cf_13_03_bb_f0
I (10339) VolcRtcProtocol: NVS凭证已加载：secret=1 appid=1 device_name=d0_cf_13_03_bb_f0, free_heap=8230100
[INF|volc_rtc.c:597]volc_rtc_create: set param[0]: {"debug":{"log_to_console":1}}
[INF|volc_rtc.c:597]volc_rtc_create: set param[1]: {"audio":{"codec":{"internal":{"enable":1}}}}
[INF|volc_rtc.c:597]volc_rtc_create: set param[2]: {"rtc":{"access":{"concurrent_requests":1}}}
[INF|volc_rtc.c:597]volc_rtc_create: set param[3]: {"rtc":{"ice":{"concurrent_agents":1}}}
2026-03-24 16:18:55.587 [I] VolcEngineRTCLite.c:153 ****************** HELLO BOOKA (68f0bc7617b8520178bef12c)(1.57.207.001)(HASH-5c3aa20fe851886d21cede0115044e17c3ec8a67) ********************
2026-03-24 16:18:55.588 [I] VolcEngineRTCLite.c:158 Platform esp32s3
2026-03-24 16:18:55.588 [I] VolcEngineRTCLite.c:161 OsVersion FreeRTOS/unknown
2026-03-24 16:18:55.588 [I] VolcEngineRTCLite.c:164 CompilerInfo GCC/14.2.0
2026-03-24 16:18:55.589 [I] VolcEngineRTCLite.c:100 BOOKA_DEVICE_LOW_RESOURCE : ON
2026-03-24 16:18:55.589 [I] VolcEngineRTCLite.c:104 BOOKA_ENABLE_EVENT_REPORT : ON
2026-03-24 16:18:55.589 [I] VolcEngineRTCLite.c:108 ENABLE_G722_CODEC : ON
2026-03-24 16:18:55.590 [I] GlobalParams.c:232 pGlobalParams->configParams.rtc.access.concurrent_requests from 2 to 1
2026-03-24 16:18:55.590 [I] GlobalParams.c:233 pGlobalParams->configParams.rtc.ice.concurrent_agents from 2 to 1
2026-03-24 16:18:55.590 [I] GlobalParams.c:239 pGlobalParams->configParams.audio.codec.internal.enable from 0 to 1
2026-03-24 16:18:55.591 [I] GlobalParams.c:244 pGlobalParams->configParams.debug.log_to_console from 0 to 1
2026-03-24 16:18:55.591 [I] GlobalParams.c:247 pGlobalParams->configParams.rtc.root_path to .
2026-03-24 16:18:55.593 [E] Cache.c:273 operation returned status code: 0x00000009
2026-03-24 16:18:55.598 [E] SocketConnection-Lite.c:191 bind local ip failed
2026-03-24 16:18:55.601 [I] LiteResolver.c:213 start resolve rtc-log-service.volcvideo.com by sep thread
2026-03-24 16:18:55.604 [I] API byte_rtc_set_audio_codec engine 0x3c5340e0 audio_codec_type 4
2026-03-24 16:18:55.605 [I] Common.c:82 rtcAudioCodec2SdkAudioCodec codec 5
2026-03-24 16:18:55.606 [I] API byte_rtc_set_video_codec engine 0x3c5340e0 video_codec_type 0
I (10359) VolcRtcProtocol: RTC实例已准备就绪；房间加入将在监听状态后执行
I (10359) Application: 🌐 开始初始化WebSocket协议...
I (10359) Application: 🔧 创建WebsocketProtocol实例
I (10359) Application: 🚀 启动WebSocket协议
I (10359) Application: ✅ WebSocket协议初始化完成
I (10359) VolcRtcProtocol: VolcRtcProtocol初始化任务已创建
I (10359) EspHttp: Opening HTTP connection to https://xiaozhi-dev-web.goods.fun/xiaozhi/ota/
I (10369) Application: 打印设置设备状态日志: idle
I (10379) AI_CHAT_UI: GIF表情切换: neutral
I (10379) Application: Entering idle state, playing standby sound
I (10389) WeatherApi: [AutoDetectAndSetLocation] 调用全局函数自动检测位置
I (10389) WeatherApi: [AutoDetectLocation] ===== 开始自动检测位置 =====
I (10389) WeatherApi: [AutoDetectLocation] 从NVS命中位置: '广州市'，已更新默认城市
I (10389) WeatherApi: [AutoDetectLocation] ===== 位置检测完成 =====
I (10389) main_task: Returned from app_main()
2026-03-24 16:18:55.656 [I] LiteResolver.c:213 start resolve rtc-log-info.volcvideo.com by sep thread
2026-03-24 16:18:55.658 [I] LiteResolver.c:213 start resolve access.rtc.volcvideo.com by sep thread
I (10489) wifi:<ba-add>idx:1 (ifx:0, 70:2a:d7:85:bc:eb), tid:3, ssn:0, winSize:64
I (10699) esp-x509-crt-bundle: Certificate validated
I (11259) Ota: HTTP response status code: 0
I (11259) Ota: Server role: , Device role: RTC_Test
W (11259) Ota: Role mismatch (Device:RTC_Test vs Server:), upgrade denied
W (11259) Ota: ✗ Upgrade conditions not met - Role: ✗, Version check: skipped
I (11259) Ota: Running partition: ota_0
2026-03-25 00:18:56.724 [E] Cache.c:311 operation returned status code: 0x00000009
2026-03-25 00:18:56.942 [I] IceAgent.c:2533 cur nominatedCandidatePair local 192.168.124.22:0 remote 59.38.99.250:443 state ICE_CANDIDATE_PAIR_STATE_SUCCEEDED
I (12939) Airhub1: ADC: 2374, 原始电压: 2.37V, 计算电池电压: 10.30V, 电量: 100%, 满电电压: 4.20V
I (12939) BluetoothMAC: Bluetooth MAC Address: d0:cf:13:03:bb:f2
I (17189) Airhub1: BOOT长按3秒：切换设备模式
I (17189) Airhub1: AI模式 → 吧唧模式
I (17199) DeviceMode: 模式切换为 吧唧，即将重启...
I (17699) wifi:state: run -> init (0x0)
I (17699) wifi:pm stop, total sleep time: 7184443 us / 11986157 us
I (17699) wifi:<ba-del>idx:0, tid:0
I (17699) wifi:<ba-del>idx:1, tid:3
I (17699) wifi:new:<1,0>, old:<1,0>, ap:<255,255>, sta:<1,0>, prof:1, snd_ch_cfg:0x0
I (17699) wifi: Reconnecting airhub (attempt 1 / 5)
I (17739) wifi:flush txq
I (17739) wifi:stop sw txq
I (17739) wifi:lmac stop hw txq
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0x2b (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379ccd
--- 0x40379ccd: esp_restart_noos at /Users/rdzleo/esp/esp-idf/v5.4.2/esp-idf/components/esp_system/port/soc/esp32s3/system_internal.c:162
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x56c
load:0x403c8700,len:0x4
load:0x403c8704,len:0xb88
load:0x403cb700,len:0x2df4
entry 0x403c88f4
I (47) WeatherApi: 初始化天气API配置 - 默认城市: 北京
I (48) WeatherApi: WiFi位置缓存限制已设置为: 5 条
I (48) coexist: coex firmware version: 7b9a184
I (48) coexist: coexist rom version e7ae62f
I (49) main_task: Started on CPU0
I (59) main_task: Calling app_main()
I (79) Application: 🎴 吧唧模式：跳过 WiFi/协议/音频初始化
I (79) Application: 打印设置设备状态日志: idle
I (79) BluetoothProvisioning: 蓝牙配网对象创建完成
I (79) button: IoT Button Version: 3.5.0
I (79) gpio: GPIO[0]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
I (79) button: IoT Button Version: 3.5.0
I (79) gpio: GPIO[4]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
I (79) Airhub1: Initializing I2C master bus for audio codec...
I (79) Airhub1: Scanning I2C bus for devices...
I (79) Airhub1: I2C设备在线: 0x18
E (79) i2c.master: I2C transaction unexpected nack detected
E (79) i2c.master: s_i2c_synchronous_transaction(945): I2C transaction failed
E (79) i2c.master: i2c_master_receive(1261): I2C transaction failed
E (79) i2c.master: I2C transaction unexpected nack detected
E (79) i2c.master: s_i2c_synchronous_transaction(945): I2C transaction failed
E (79) i2c.master: i2c_master_receive(1261): I2C transaction failed
I (79) Airhub1: I2C设备在线: 0x40
I (79) Airhub1: I2C scan completed. Found 2 devices
I (79) DZBJ: 开始初始化显示硬件...
I (79) gpio: GPIO[7]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (79) st77916: LCD panel create success, version: 1.0.1
W (209) st77916: The 3Ah command has been used and will be overwritten by external initialization sequence
I (329) LCD: LCD GRAM cleared (black filled)
I (329) DZBJ: LCD 硬件初始化完成
I (329) gpio: GPIO[5]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:2
I (329) gpio: GPIO[6]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (729) CST816S: IC id: 182
I (729) LCD: Touch controller initialized successfully
I (729) LVGL: Starting LVGL task
I (729) LCD: LVGL buffer: 14400 bytes (W:360, Lines:20, DMA, single)
I (729) LCD: Touch controller added to LVGL
I (729) DZBJ: LVGL 初始化完成
I (729) DZBJ: UI 初始化完成
I (829) DZBJ: 背光已点亮，dzbj 显示模块初始化完成
I (829) Airhub1: 🎴 电子吧唧模式启动
I (829) Airhub1: 初始化吧唧模式按钮...
I (829) Airhub1: Boot button initialized on GPIO0
I (829) Airhub1: 吧唧模式按钮初始化完成
I (829) Airhub1: 初始化电子吧唧模式外设...
I (939) FATFS: SPIFFS: Total size: 2763761, Used: 78061
I (989) IMG_LIST: 开始扫描SPIFFS中的图片文件
I (989) IMG_LIST: 发现图片文件: 03.jpg
I (989) IMG_LIST: 发现图片文件: 02.jpg
I (989) IMG_LIST: 发现图片文件: default.jpg
I (1039) IMG_LIST: 图片列表初始化完成，共发现 3 张图片
I (1039) IMG_LIST: 设置默认图片索引: 2
I (1039) gpio: GPIO[4]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:2
I (1039) DZBJ_BTN: 按键初始化完成 (KEY2=GPIO4，BOOT由iot_button处理)
I (1039) DZBJ_BAT: ADC校准初始化成功
I (1039) DZBJ_BAT: 电池ADC初始化完成 (GPIO3, ADC1_CH2, 分压比=2)
I (1039) DZBJ_BAT: ADC原始值=2838, ADC电压=2372mV, 电池电压=4744mV, 电量=100%
I (1039) DZBJ_BAT: 电池监控任务已启动，更新间隔5000ms
I (1039) BLE_INIT: BT controller compile version [6cfabcd]
I (1039) BLE_INIT: Feature Config, ADV:1, BLE_50:1, DTM:1, SCAN:1, CCA:0, SMP:1, CONNECT:1
I (1049) BLE_INIT: Bluetooth MAC: d0:cf:13:03:bb:f2
I (1049) phy_init: phy_version 701,f4f1da3a,Mar 3 2025,15:50:10
I (1079) phy_init: Saving new calibration data due to checksum failure or outdated calibration data, mode(0)
I (1149) DZBJ_BLE: GATT server register, status 0, app_id 0
I (1149) DZBJ_BLE: 图片传输服务创建成功，句柄: 28
I (1149) DZBJ_BLE: 图片写入特征创建成功,句柄: 42
I (1149) DZBJ_BLE: 图片编辑特征创建成功,句柄: 44
I (1149) DZBJ_BLE: BLE MAC: d0:cf:13:03:bb:f2
I (1149) DZBJ_BLE: 蓝牙设备名称: Airhub_d0:cf:13:03:bb:f2
I (1149) DZBJ_BLE: Advertising data set, status 0
I (1149) DZBJ_BLE: Scan response data set, status 0
I (1149) DZBJ_BLE: Advertising start successfully
I (1149) SLEEP: 休眠管理器初始化完成（超时=10s）
I (1149) Airhub1: 电子吧唧模式初始化完成
I (1149) main_task: Returned from app_main()
I (6039) DZBJ_BAT: ADC原始值=2841, ADC电压=2375mV, 电池电压=4750mV, 电量=100%
I (11039) DZBJ_BAT: ADC原始值=2841, ADC电压=2375mV, 电池电压=4750mV, 电量=100%
I (14509) DZBJ_BLE: Connected, conn_id 0, remote 73:8f:af:0d:36:7a
I (14539) DZBJ_BLE: PHY update, status 0, tx_phy 1, rx_phy 1
I (14879) DZBJ_BLE: Connection params update, status 0, conn_int 12, latency 0, timeout 400
I (15039) DZBJ_BLE: Connection params update, status 0, conn_int 6, latency 0, timeout 500
I (15179) DZBJ_BLE: Connection params update, status 0, conn_int 12, latency 0, timeout 400
I (16039) DZBJ_BAT: ADC原始值=2839, ADC电压=2372mV, 电池电压=4744mV, 电量=100%
I (16329) DZBJ_BLE: PHY update, status 0, tx_phy 2, rx_phy 2
W (17429) BT_HCI: hcif disc complete: hdl 0x1, rsn 0x13 dev_find 1
I (17429) DZBJ_BLE: Disconnected, remote 73:8f:af:0d:36:7a, reason 0x13
I (17429) DZBJ_BLE: Advertising start successfully
I (21039) DZBJ_BAT: ADC原始值=2842, ADC电压=2376mV, 电池电压=4752mV, 电量=100%
Reference in New Issue View Git Blame Copy Permalink