Rdzleo/toy-Kapi_Rtc
2
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
toy-Kapi_Rtc/05-最新日志.txt

233 lines
15 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

I (49) WeatherApi: 初始化天气API配置 - 默认城市: 北京
I (49) WeatherApi: WiFi位置缓存限制已设置为: 5 条
I (50) coexist: coex firmware version: 7b9a184
I (50) coexist: coexist rom version e7ae62f
I (51) main_task: Started on CPU0
I (61) main_task: Calling app_main()
I (81) BackgroundTask: background_task started
I (81) BluetoothProvisioning: 蓝牙配网对象创建完成
I (81) button: IoT Button Version: 3.5.0
I (81) gpio: GPIO[0]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
I (81) button: IoT Button Version: 3.5.0
I (81) gpio: GPIO[4]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
I (81) Airhub1: 初始化按钮...
I (81) Airhub1: Boot button initialized on GPIO0
I (81) Airhub1: Volume up button initialized on GPIO-1
I (81) Airhub1: Volume down button initialized on GPIO-1
I (81) Airhub1: 故事按键已初始化，GPIO引脚 =4
I (81) Airhub1: 所有按键已成功初始化！
I (81) Airhub1: Initializing I2C master bus for audio codec...
I (81) Airhub1: Scanning I2C bus for devices...
I (81) Airhub1: I2C设备在线: 0x18
E (81) i2c.master: I2C transaction unexpected nack detected
E (81) i2c.master: s_i2c_synchronous_transaction(945): I2C transaction failed
E (81) i2c.master: i2c_master_receive(1261): I2C transaction failed
E (81) i2c.master: I2C transaction unexpected nack detected
E (81) i2c.master: s_i2c_synchronous_transaction(945): I2C transaction failed
E (81) i2c.master: i2c_master_receive(1261): I2C transaction failed
I (81) Airhub1: I2C设备在线: 0x40
I (81) Airhub1: I2C scan completed. Found 2 devices
I (81) Airhub1: IMU传感器未初始化，跳过IoT注册
I (81) Airhub1: Initializing battery monitor...
I (81) Airhub1: ADC calibration initialized
I (81) Airhub1: 电池状态监控已初始化，GPIO:6
I (81) Airhub1: 非生产测试模式且不在对话状态，姿态传感器业务已禁用以节约资源
I (81) PowerSaveTimer: Power save timer enabled
I (81) Airhub1: 🔋 PowerSaveTimer已启用，20秒无活动将进入低功耗模式
I (81) Airhub1: 在构造函数完成后调用触摸初始化
I (81) Application: 打印设置设备状态日志: starting
I (91) Application: 正常启动流程，将执行开机播报和网络连接播报
I (91) Airhub1: Initializing audio codec...
I (91) Airhub1: Creating BoxAudioCodec (ES8311+ES7210, without reference) ...
I (91) BoxAudioCodec: Duplex channels created
I (91) ES8311: Work in Slave mode
I (101) gpio: GPIO[48]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (101) ES7210: Work in Slave mode
I (111) ES7210: Enable ES7210_INPUT_MIC1
I (111) ES7210: Enable ES7210_INPUT_MIC2
I (111) BoxAudioCodec: BoxAudioDevice initialized
I (111) Airhub1: Audio codec initialized successfully
I (111) Application: 检测到WiFi板卡，将opus编码器复杂度设置为3
I (111) OpusResampler: Resampler configured with input sample rate 16000, output sample rate 8000, and channels 1
I (121) I2S_IF: channel mode 2 bits:16/16 channel:2 mask:1
I (121) I2S_IF: TDM Mode 0 bits:16/16 channel:2 sample_rate:16000 mask:1
I (121) I2S_IF: channel mode 0 bits:16/16 channel:2 mask:1
I (121) I2S_IF: STD Mode 1 bits:16/16 channel:2 sample_rate:16000 mask:1
I (121) ES7210: Bits 16
I (121) ES7210: Enable ES7210_INPUT_MIC1
I (131) ES7210: Enable ES7210_INPUT_MIC2
I (131) ES7210: Unmuted
I (131) Adev_Codec: Open codec device OK
I (141) BoxAudioCodec: Input opened: sr=16000 ch=1 mask=0x1 ref=0
I (141) AudioCodec: Set input enable to true
I (141) I2S_IF: channel mode 0 bits:16/16 channel:2 mask:1
I (141) I2S_IF: STD Mode 1 bits:16/16 channel:2 sample_rate:16000 mask:1
I (151) Adev_Codec: Open codec device OK
I (151) AudioCodec: Set output enable to true
I (151) AudioCodec: Audio codec started
I (251) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (251) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (351) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (351) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (451) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (451) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (551) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (551) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (651) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (651) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (751) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (751) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (851) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (851) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (951) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (951) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (1051) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (1051) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (1081) Airhub1: 开始延迟初始化触摸板...
I (1081) Airhub1: 初始化触摸板...
I (1081) Airhub1: 配置触摸传感器...
I (1081) Airhub1: 校准触摸阈值...
I (1081) Airhub1: 触摸板 0 初始原始值: 3578511
I (1081) Airhub1: 触摸板 0 设置固定阈值: 5000
I (1081) Airhub1: 触摸板 1 初始原始值: 3995179
I (1081) Airhub1: 触摸板 1 设置固定阈值: 5000
I (1081) Airhub1: 触摸板 2 初始原始值: 3791182
I (1081) Airhub1: 触摸板 2 设置固定阈值: 5000
I (1081) Airhub1: 触摸板 3 初始原始值: 4048727
I (1081) Airhub1: 触摸板 3 设置固定阈值: 5000
I (1081) Airhub1: 启用触摸传感器滤波器
I (1081) Airhub1: 触摸阈值校准完成，使用固定阈值: 5000
I (1081) Airhub1: 创建触摸事件队列...
I (1081) Airhub1: 注册触摸中断处理程序...
I (1081) Airhub1: 创建触摸事件任务...
I (1081) Airhub1: 触摸事件任务启动
I (1081) Airhub1: 触摸事件任务开始主循环
I (1081) Airhub1: 所有触摸状态已重置
I (1081) Airhub1: 设置触摸监控...
I (1081) Airhub1: 触摸板初始化完成
I (1151) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (1151) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (1181) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (1181) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (1251) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (1251) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (1351) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (1351) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (1451) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (1451) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (1551) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (1551) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (1651) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (1651) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (1751) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (1751) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (1851) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (1851) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (1951) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (1951) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (2051) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (2051) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (2151) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (2151) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
I (2151) AudioCodec: 将运行时输出音量设置为：80
I (2151) Application: 设备启动完成，播放开机播报语音
I (2151) pp: pp rom version: e7ae62f
I (2151) net80211: net80211 rom version: e7ae62f
I (2161) wifi:wifi driver task: 3fce48b4, prio:23, stack:6656, core=0
I (2161) wifi:wifi firmware version: bea31f3
I (2161) wifi:wifi certification version: v7.0
I (2161) wifi:config NVS flash: disabled
I (2161) wifi:config nano formatting: disabled
I (2161) wifi:Init data frame dynamic rx buffer num: 32
I (2161) wifi:Init dynamic rx mgmt buffer num: 5
I (2161) wifi:Init management short buffer num: 32
I (2161) wifi:Init static tx buffer num: 16
I (2161) wifi:Init tx cache buffer num: 32
I (2161) wifi:Init static tx FG buffer num: 2
I (2161) wifi:Init static rx buffer size: 1600
I (2161) wifi:Init static rx buffer num: 16
I (2161) wifi:Init dynamic rx buffer num: 32
I (2161) wifi_init: rx ba win: 16
I (2161) wifi_init: accept mbox: 6
I (2161) wifi_init: tcpip mbox: 32
I (2161) wifi_init: udp mbox: 6
I (2161) wifi_init: tcp mbox: 6
I (2161) wifi_init: tcp tx win: 5760
I (2161) wifi_init: tcp rx win: 5760
I (2161) wifi_init: tcp mss: 1440
I (2161) wifi_init: WiFi/LWIP prefer SPIRAM
I (2161) phy_init: phy_version 701,f4f1da3a,Mar 3 2025,15:50:10
I (2191) wifi:mode : sta (d0:cf:13:03:bb:f0)
I (2191) wifi:enable tsf
I (2201) Application: 开始播放下行音频: 样本=960 采样率=16000
I (4601) wifi: 发现可连接 AP: airhub, BSSID: 70:2a:d7:85:bc:eb, RSSI: -35, Channel: 1, Authmode: 3
I (4611) WifiBoard: Starting WiFi connection, playing network connection sound
W (4611) wifi:Password length matches WPA2 standards, authmode threshold changes from OPEN to WPA2
I (4691) wifi:new:<1,0>, old:<1,0>, ap:<255,255>, sta:<1,0>, prof:1, snd_ch_cfg:0x0
I (4691) wifi:state: init -> auth (0xb0)
I (4721) wifi:state: auth -> assoc (0x0)
I (4741) wifi:state: assoc -> run (0x10)
I (4751) wifi:connected with airhub, aid = 1, channel 1, BW20, bssid = 70:2a:d7:85:bc:eb
I (4761) wifi:security: WPA2-PSK, phy: bgn, rssi: -33
I (4761) wifi:pm start, type: 1
I (4761) wifi:dp: 1, bi: 102400, li: 3, scale listen interval from 307200 us to 307200 us
I (4761) wifi:set rx beacon pti, rx_bcn_pti: 14, bcn_timeout: 25000, mt_pti: 14, mt_time: 10000
I (4761) wifi:AP's beacon interval = 102400 us, DTIM period = 1
I (5081) Airhub1: 📤 电量上报功能已启用，每30秒上报一次
I (6301) wifi:<ba-add>idx:0 (ifx:0, 70:2a:d7:85:bc:eb), tid:0, ssn:0, winSize:64
I (8781) wifi: Got IP: 192.168.124.47
I (8781) esp_netif_handlers: sta ip: 192.168.124.47, mask: 255.255.255.0, gw: 192.168.124.1
I (10821) VolcRtcProtocol: 设置Agent配置参数: {"Config":{"WebSearchAgentConfig":{"ParamsString":"{\"bot_id\":\"7585449675889608233\",\"stream\":true,\"location_info\":{\"city\":\"广州市\"}}"}}}
I (10821) VolcRtcProtocol: VolcRtcProtocol 开始启动...
I (10821) VolcRtcProtocol: 使用Wi-Fi MAC地址作为设备名称(已替换冒号为下划线): d0_cf_13_03_bb_f0
I (10821) VolcRtcProtocol: NVS凭证已加载：secret=1 appid=1 device_name=d0_cf_13_03_bb_f0, free_heap=8290496
[INF|volc_rtc.c:597]volc_rtc_create: set param[0]: {"debug":{"log_to_console":1}}
[INF|volc_rtc.c:597]volc_rtc_create: set param[1]: {"audio":{"codec":{"internal":{"enable":1}}}}
[INF|volc_rtc.c:597]volc_rtc_create: set param[2]: {"rtc":{"access":{"concurrent_requests":1}}}
[INF|volc_rtc.c:597]volc_rtc_create: set param[3]: {"rtc":{"ice":{"concurrent_agents":1}}}
2026-02-02 11:07:18.214 [I] VolcEngineRTCLite.c:153 ****************** HELLO BOOKA (68f0bc7617b8520178bef12c)(1.57.207.001)(HASH-5c3aa20fe851886d21cede0115044e17c3ec8a67) ********************
2026-02-02 11:07:18.214 [I] VolcEngineRTCLite.c:158 Platform esp32s3
2026-02-02 11:07:18.215 [I] VolcEngineRTCLite.c:161 OsVersion FreeRTOS/unknown
2026-02-02 11:07:18.215 [I] VolcEngineRTCLite.c:164 CompilerInfo GCC/14.2.0
2026-02-02 11:07:18.215 [I] VolcEngineRTCLite.c:100 BOOKA_DEVICE_LOW_RESOURCE : ON
2026-02-02 11:07:18.215 [I] VolcEngineRTCLite.c:104 BOOKA_ENABLE_EVENT_REPORT : ON
2026-02-02 11:07:18.216 [I] VolcEngineRTCLite.c:108 ENABLE_G722_CODEC : ON
2026-02-02 11:07:18.216 [I] GlobalParams.c:232 pGlobalParams->configParams.rtc.access.concurrent_requests from 2 to 1
2026-02-02 11:07:18.216 [I] GlobalParams.c:233 pGlobalParams->configParams.rtc.ice.concurrent_agents from 2 to 1
2026-02-02 11:07:18.217 [I] GlobalParams.c:239 pGlobalParams->configParams.audio.codec.internal.enable from 0 to 1
2026-02-02 11:07:18.217 [I] GlobalParams.c:244 pGlobalParams->configParams.debug.log_to_console from 0 to 1
2026-02-02 11:07:18.217 [I] GlobalParams.c:247 pGlobalParams->configParams.rtc.root_path to .
2026-02-02 11:07:18.219 [E] Cache.c:273 operation returned status code: 0x00000009
2026-02-02 11:07:18.225 [E] SocketConnection-Lite.c:191 bind local ip failed
2026-02-02 11:07:18.228 [I] LiteResolver.c:213 start resolve rtc-log-service.volcvideo.com by sep thread
2026-02-02 11:07:18.231 [I] API byte_rtc_set_audio_codec engine 0x3c2eb4f0 audio_codec_type 4
2026-02-02 11:07:18.232 [I] API byte_rtc_set_video_codec engine 0x3c2eb4f0 video_codec_type 0
2026-02-02 11:07:18.233 [I] Common.c:82 rtcAudioCodec2SdkAudioCodec codec 5
I (10841) VolcRtcProtocol: RTC实例已准备就绪；房间加入将在监听状态后执行
I (10841) Application: 🌐 开始初始化WebSocket协议...
I (10841) Application: 🔧 创建WebsocketProtocol实例
I (10841) Application: 🚀 启动WebSocket协议
I (10841) Application: ✅ WebSocket协议初始化完成
I (10841) VolcRtcProtocol: VolcRtcProtocol初始化任务已创建
I (10841) Application: 打印设置设备状态日志: idle
I (10851) Application: Entering idle state, playing standby sound
I (10851) WeatherApi: [AutoDetectAndSetLocation] 调用全局函数自动检测位置
I (10851) WeatherApi: [AutoDetectLocation] ===== 开始自动检测位置 =====
I (10851) WeatherApi: [AutoDetectLocation] 从NVS命中位置: '广州市'，已更新默认城市
I (10851) WeatherApi: [AutoDetectLocation] ===== 位置检测完成 =====
I (10851) main_task: Returned from app_main()
2026-02-02 11:07:18.266 [I] LiteResolver.c:213 start resolve access.rtc.volcvideo.com by sep thread
2026-02-02 11:07:18.267 [I] LiteResolver.c:213 start resolve rtc-log-info.volcvideo.com by sep thread
I (11181) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (11181) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
2026-02-02 11:07:18.901 [E] Cache.c:311 operation returned status code: 0x00000009
I (11531) wifi:<ba-add>idx:1 (ifx:0, 70:2a:d7:85:bc:eb), tid:7, ssn:0, winSize:64
2026-02-02 11:07:19.126 [I] IceAgent.c:2533 cur nominatedCandidatePair local 192.168.124.47:0 remote 183.2.197.178:50001 state ICE_CANDIDATE_PAIR_STATE_SUCCEEDED
2026-02-02 11:07:25.306 [E] EventReportControl.c:399 not match curSeqId: 1, responseSeqId: 19
I (20081) Airhub1: 🔋 进入低功耗模式：CPU降频、Light Sleep启用、功放关闭
I (20091) I2S_IF: Pending out channel for in channel running
I (20091) AudioCodec: Set output enable to false
I (20091) Airhub1: 🔊 功放已关闭
I (21181) Airhub1: ADC: 3149, 原始电压: 3.15V, 计算电池电压: 13.67V, 电量: 100%, 满电电压: 4.20V
I (21181) WiFiMAC: Wi-Fi MAC Address: d0:cf:13:03:bb:f0
Reference in New Issue View Git Blame Copy Permalink